Search found 93 matches

by axess
April 12th, 2002, 10:44 am
Forum: General Mazda MX-3
Topic: Sunroof
Replies: 5
Views: 116

Re: Sunroof

Thanks for replys,<BR>I don't know how much it costs to get a sunroof as mine was already there when I bought the car. It might even be factory, I say it's aftermarket cause it doesn't look like the ones on a GS, it looks like someone cut a hole in the car... Where can i find some rubber revitalizer ?
by axess
April 12th, 2002, 10:40 am
Forum: 4-Cyl. Technical/Performance
Topic: Problems with gear and clutch???
Replies: 4
Views: 137

Re: Problems with gear and clutch???

I had the exact same problem last november when cold days started. Just change your transmission oil and you should be fine. Might as well put some red line oil in there, everyone seems to like it, but I haven't tried it yet.<P>If you want to do this yourself I cant really help there, but look in th...
by axess
April 11th, 2002, 12:51 pm
Forum: Car Stereo/Alarm
Topic: Experts-Can isolator (solenoid) go bad and why?
Replies: 1
Views: 214

Re: Experts-Can isolator (solenoid) go bad and why?

Did you check if the amp is too warm or not ?
by axess
April 11th, 2002, 12:49 pm
Forum: General Mazda MX-3
Topic: Sunroof
Replies: 5
Views: 116

Sunroof

Hey all,<BR>I wanted to know wich way would be best to fix a sunroof with really minor leaking. When it's raining hard there's a couple of drops that make their way in from the two front corners. It's really not that bad, the seats don't even get wet, but it's still anoying. What would you suggest ?...
by axess
April 9th, 2002, 12:02 pm
Forum: General Mazda MX-3
Topic: Worn Synchronizer
Replies: 5
Views: 255

Re: Worn Synchronizer

I started my research and the only price i could get is around 130$ CND just to see what is going on and then it's more money for labour and parts. The guy told me to expect about 10 hours of labour at 68$/hour + parts, so thats around 700$ just for labour. So for now I'm probably just going to wait...
by axess
April 6th, 2002, 12:30 pm
Forum: General Mazda MX-3
Topic: Worn Synchronizer
Replies: 5
Views: 255

Worn Synchronizer

Hey guys and girls,<BR>I think I have a worn synchro for 2nd gear, when I shift it grinds for a second. I have to wait a little between first and second.<P>I'm pretty sure that's the problem, if you think it's something else, then tell me what you think.<P>How much should I expect to spend if it is ...
by axess
March 28th, 2002, 11:29 am
Forum: 4-Cyl. Technical/Performance
Topic: just curious...
Replies: 7
Views: 465

Re: just curious...

I don't really see myself using a bike in the winter and I dont want to take the bus...<P>Did you fall of your bike and hit your head ? :eek:
by axess
March 28th, 2002, 12:54 am
Forum: General Mazda MX-3
Topic: running power from battery
Replies: 12
Views: 154

Re: running power from battery

If I remember correctly, when switches have 3 prongs, the middle one can be positive or ground and let either the left or right be the other wire, the only difference will be on wich side the switch will be on and off. I don't think you can get it wrong really, cause all a switch does is stop the cu...
by axess
March 28th, 2002, 12:46 am
Forum: 4-Cyl. Technical/Performance
Topic: Too loud, what if I add a resonator?
Replies: 1
Views: 91

Re: Too loud, what if I add a resonator?

Hey brainless, I'm guessing that you wont have a choice but get someone to cut your almost brand new piping and put a resonator in place. About % of being less loud, well I don't know about that, but I don't think you'll get pulled over again ;)
by axess
March 4th, 2002, 10:22 am
Forum: 4-Cyl. Technical/Performance
Topic: Base timing
Replies: 2
Views: 76

Re: Base timing

Not sure if this is what you mean, but I know that on MX3 to put the car in diagnostics mode you need to ground pin 10 from the diagnostics plug.
by axess
March 1st, 2002, 10:54 am
Forum: General Mazda MX-3
Topic: Manuel window problem
Replies: 9
Views: 109

Re: Manuel window problem

So do I, drivers side, I took the door apart to take a look, and......Nothing, everything looked fine, all screws where nice and tight. Stay tuned for attempt #2 this spring. :(
by axess
March 1st, 2002, 10:51 am
Forum: General Mazda MX-3
Topic: Manuel window problem
Replies: 9
Views: 109

Re: Manuel window problem

So do I, drivers side, I took the door apart to take a look, and......Nothing, everything looked fine, all screws where nice and tight. Stay tuned for attempt #2 this spring. :(
by axess
February 28th, 2002, 10:31 am
Forum: 4-Cyl. Technical/Performance
Topic: what engines are the same
Replies: 3
Views: 97

Re: what engines are the same

You should search the forum before asking a question like this one, it's only covered in like 1 topic out of 2...<P>Anyways, for better performance you can get the 1.6L B6T or 1.8L BPT wich are out of 323 are direct bolt-ons (as far as the engine goes, other parts need to be changed to meet performa...
by axess
February 27th, 2002, 4:25 pm
Forum: General Mazda MX-3
Topic: Please help! Quebec traffic ticket specialists
Replies: 10
Views: 234

Re: Please help! Quebec traffic ticket specialists

I'm 22, 3-4 years experience and this is my third car, now I pay 123$/month. I don't know what to expect when I will renew my insurance, but I think it will go unoticed (I hope :roll: ) because I got a 2 point ticket back when I had my probation license and they gave me a rebate for good drivers to ...
by axess
February 25th, 2002, 1:26 pm
Forum: General Mazda MX-3
Topic: What Should I BUY: 93 MX-3 or 92 Integra 2 DR?
Replies: 13
Views: 568

Re: What Should I BUY: 93 MX-3 or 92 Integra 2 DR?

Integra is Honda and Acura... Acura is high end cars from Honda as Lexus are from Toyota, as Ford is Lincoln (I think)... You get the idea....<P>I'm at my first MX3 and it's a 96 with low milleage, I bought it from the dealer so all the repairs where already done. The only trouble I had was with the...

Go to advanced search