MX-3.com

Miata 1.6L fidanza flywheel
MX-3 94+ 1.6 dohc clutch disc (the clutch disc form a 92-93 1.6 sohc are smaller than that of the 1.6 dohc)
Miata 1.6L pressure plate (which ever brand you want.)

The miata flywheel will bolt up to the crank. You have to use the mx-3 dohc clutch disc because its a 20 ...

the_twig_187 wrote:
Miata 1.6L fidanza flywheel
MX-3 94+ 1.6 dohc clutch disc (the clutch disc form a 92-93 1.6 sohc are smaller than that of the 1.6 dohc)
Miata 1.6L pressure plate

How do I now did that about 4-5 years ago. hope that helps you

To bad you don't live in TX.
why's that? lol

Because am intrigue as to why it is not running the way you think it should. But lets face it with all the response's you have had is it running anywhere up to par. That's why I say to bad you don't live in TX I would just like to fix it just to fix ...

To bad you don't live in TX.

Damn this post is old...

The dohc is a 2 piece oil pan the sohc is a single piece. Save yourself the headache find a dohc oil pan.

T3/t4 is not over kill given to do a decent turbo setup, engine management is the key. If your not wiling to do neither, because it isn't cheap than yes wanting to install a t3/t4 turbo is over kill.

What are your power goals if your thinking spending 500 bucks will get you in turbo form, your ...

shouldn't matter. I bet they're the same flywheel...

there not doll pins mounted differently from the sohc and dohc not to mention the dohc clutch disc and pressure plate is physical a bit larger than that of the sohc. I bet its the same is incorrect. Compared to know the answer to that ?

If u ...

The one in the background.

Along with having a turbo BP MX-3 finally have my hands on a turbo b6 Miata

The Turbo Miata B6

http://i59.photobucket.com/albums/g288/rbluemx6/015-5.jpg
http://i59.photobucket.com/albums/g288/rbluemx6/011-9.jpg
http://i59.photobucket.com/albums/g288/rbluemx6/012-8.jpg

The Turbo BP MX-3 ...

It should work is not true/yes answer. Its a guess and assumption unless the treads u read it from so proof's otherwise..

I would take it back and get the 93 protege engine. Besides the bolt pattern that mates the 2nd gen kia engine to a genuine mazda trans would not bolt up. Found that out when i ...

here they look the same but there are not if it can't be seen IDK what else to say.


99 4W

1st gen bp

Don't doubt a BP, Oklahoma not that far away from TX.

.

lime, the miata community does swap to the 4w head but they keep the 4w manifold on the head when they swap it in.

.


That is true but a reg 94-98 bp intake manifold does not mated properly with a 4w head and vise verse. What u say will work in RWD form what im trying to say is that they don ...

Mfactory has a them about $700 + extra expense's u need to know if u need a 26 spline or 28 spline diff. The other brand is Quaife and expensive.