MX-3.com

I got my curved neck from Lynnwood. To answer your question about is it worth it - well it saves a lot of hassle changing things over.

$400 for shipping! If you find an engine on the west coast it should be no more than $200 - have you tried Foreign Engines in Lynnwood, WA?
They had 3 KLZE's for $849 2 weeks ago and shipping was not $400

I used the bracket which came with my ZE - it's good and smooth action but the cable runs at 30 degrees to a straight line. Also the nuts which adjust the length are at the maximum. Getting this sorted out is on my list of around 15 little things to get perfect after the swap last week - Simon

yes - the exact number was KL02 197200 070

wish you luck & don't worry about the questions as when you get tired & stressed you need to take time out to figure out what to do. Look at all the dumb questions I've been asking the last week or so!

I've been told the klze ecu doesn't support the egr which means automatic emissions fail in most places....

Finally!!!!<p>with KL-02 vaf & k8 ecu my KLZE is clean enough to pass emmissions! In fact it was so clean it got a fast pass half way through the test cycle.<p>The HC/CO/NO are all less than 50% of the standard,<p>thanks everyone for your help over the last couple of weeks in doing the swap

it was tested as an mx-3, I don't know if British Columbia has any rules about modified engines etc. I'll try and find out. <p>I put a KL-02 VAF on last night and I;ll see what that does to the emmissions when I take it later on today - there is a noticeable difference in power and I had to reset th...

My KLZE with K8 ecu + K8 vaf has just failed emissions: Hydrocarbons - 6 times the limit at 2.17g/km<p>Carbon Monoxide - 6 times the limit at 53g/km<p>but the good news(?) is that NOx is 50% of the limit so it passed for that - so I get the EGR works ok!<p>What do you think the best way to pass is a...

I've had to take the blower out twice now to clear the leaves etc that fall in as the blower fan starts ticking after a while.

so Precidian you kept the K8 ecu?

So Lazzyie - you run the KLZE with a KL-02 VAF and the K8 ecu? - if that works ok that'll be worth trying and saving me a bit of money,<p>thanks for the advice

I checked with Mazda first of all to see what the parts would be new:<p>$1900 for the ecu & $1100 for the VAF - then plus 14.5% tax = $3435 CAD or US$2500!!! <p>I was surprised when the parts man said he has never sold one - I wonder why?<p>The wreckers are asking for around $350 - $450 CAD for ...

thanks Tom - I'm going to ring a few local wreckers this afternoon to check out prices,