MX-3.com

so the book says use ATF for our gear boxes... ive always used royal purple but do we accualy know if it doesnt work better. b/c i know honda trannys use 10w30 oil in their gearboxes ......so what can this tell us???

home depot.......get a 1/2 male barbed fitting in the plumbing sec. and drill into your oil pan and use epoxy to seal it on their.....and i repeat do not use a 1/8 to 1/2 fitting for the drain line... you want it to be as big as possible...

bad gas?

keep the main one but take out the a/c fan and move it over thats it....

deff. the vaf.....check for any leaks around it in the air intake like stated plus check the wiring plug that plugs into the vaf, ive notived after time they seem to just fall apart....

you should have 2 fitting simular to that on the turbo, one for oil sending to the turbo and the other return to the oil pan. the fitting in the pic is for the oil to motor pan.... so you need a male brass fitting to screw into it and then the same goes for you oil pan ( which you can use high heat/...

everyone says you need the kf ecu but i did a swap for a friend and it runs/idles fine and thats 8 months running strong...

what kind of belt would i need for runing the water pump by itself?

i was just wondering if anyone has removed there power steering and if so is it still good enough for daily use? ive drove hondas without it and they drive fine so would the mx?

the nut your looking for is on the inside fire wall and is rather difficult to reach but it can be done. it is a tight space...

i already tryed that..... could the rubber line just be bad and still not leak?

like stated theres no fluid coming through the clutch line when i went to bleed it. and yes i know how to bleed it right ive done it before but i dont get it b/c i replaced everything and nothings leaking. And its like not sucking out from the resivor wierd.... heres a list of what ive replaced ( ne...

well could anyone atleast anwser if the pressure in the clutch has to do with the tranny itself or is it seprate?

need some help plz!!!