MX-3.com

TsiMiata wrote:Just go out and try to lock up the brakes. You'll know wether or not it's working then.

We had snow this a.m. so locking the brakes was easy. ABS functioning perfectly.

Mike

I had a problem with the ABS light coming on about 2 or 3 minutes into a drive. On startup I got the groan and the pedal would shimmy a touch, and then itappeared the ABS cut out. My CVs needed doing so had the axles swapped out. Now the ABS light lights up on ignition then goes out and stays off. T...

[QUOTE]Originally posted by n_o_s_21: [QB] Since it is the holiday season, and I need the room, the following items will be given away first come, first serve. the only thing I ask is that you bring me some holiday cheer(case of MGD bottles): Rear bumper black I'm in for the rear bumper. I'll contac...

Originally posted by fry_81: take the engine out? no no no. if a mechanic told you that they are trying to scam you. theres enough room to work once you take off the belts and hoses. you can probably do it in a weekend. I found it a bit easier if I took out the right motor mount. Gave me better acc...

I have changed my water pump and a few hoses. My temperature gauges seems to level out at about 60% up the gauge. I can't remeber if that is hotter than before.

Where does your temp gauge line up when the car is at running temperature?

Thanks, Mike

I used the timing belt step-by-step found on this site and had my water pump and timing belt done 5 hours later without a problem. Any chance there is a step-by-step to replace the axles around? Thanks, Mike <small>[ April 03, 2004, 11:39 PM: Message edited by: Mike Silverton ]</small>

Originally posted by IanL:
To read the codes, connect between FBS and GND in the diagnostic connector, then ignition on, engine off.

Ian,

Is that the TBS or the FBS? I have found some information but they refer to jumping the TBS and GND.

Thanks, Mike

Does anyone have the OBD codes for the the brakes. I need to diagnose the ABS brakes on my GS. Light keeps coming on a few minutes after driving.

Thanks, Mike

Originally posted by Ryan Dunagan:
Also, how do i wire my lights to blink when i arm/disarm it? the guy that had it put in was cheap, it only beeps.

If you mean the parking lights, I just wired mine to the black/red on the dimmer switch.

Mike

Originally posted by 2fazed: I just did the swap (power windows & wire harness) and from what I saw on the 92GS I swapped them from. The passenger door has the plug and the stock actuator, but the driver's side didn't have the actuator. I'm guessing that when the driver's lock is opened, the pa...

Although not an MX3 part, it is for an MX3

I am looking to purchase a Clifford Alarm Data Cable to hook up a Concept 400 to my PC.

Anyone have one for sale?

Thanks,Mike

Does anyone have a Clifford Alarm Data Cable for sale?

Or, better yet, the pin out to build one?

Thanks, Mike

<small>[ February 29, 2004, 01:06 PM: Message edited by: Mike Silverton ]</small>

I have a copy in Word, w/ pictures.

Mike

I have to remove my door panel to install a door lock actuator. Any words of caution or specific removal directions?

Thanks, Mike

I may have a word copy of the timing belt/water pump replacement with pictures on my office computer. I just did mine last week and used it.

I'll check and let you know Wednesday.

Mike