Does anyone have the OBD codes for the the brakes. I need to diagnose the ABS brakes on my GS. Light keeps coming on a few minutes after driving.
Thanks, Mike
OBD Brake Codes
-
- Regular Member
- Posts: 34
- Joined: January 26th, 2004, 2:01 am
- Location: Nanaimo BC
- Contact:
Re: OBD Brake Codes
Chilterns for MX-6/626/Probe V6 gives some codes for 93-98. To read the codes, connect between FBS and GND in the diagnostic connector, then ignition on, engine off. It's a bit confusing because it talks about watching the number of sweeps on an analogue voltmeter, AND that the light will flash long periods for the first digit, followed by short periods for the second digit. If it does that why bother with the voltmeter?
Anyway, there are 15 codes given (but it implies there are more). If you want them, PM me your email and I'll send you a scan.
<small>[ March 29, 2004, 01:52 AM: Message edited by: IanL ]</small>
Anyway, there are 15 codes given (but it implies there are more). If you want them, PM me your email and I'll send you a scan.
<small>[ March 29, 2004, 01:52 AM: Message edited by: IanL ]</small>
Re-shaped and re-sized gearshift lever. Best driveability mod you can do!
Extra thick soundproofing in the boot (trunk) to quieten my stainless steel exhaust system
Extra thick soundproofing in the boot (trunk) to quieten my stainless steel exhaust system
-
- Regular Member
- Posts: 34
- Joined: January 26th, 2004, 2:01 am
- Location: Nanaimo BC
- Contact:
Re: OBD Brake Codes
Ian,Originally posted by IanL:
To read the codes, connect between FBS and GND in the diagnostic connector, then ignition on, engine off.
Is that the TBS or the FBS? I have found some information but they refer to jumping the TBS and GND.
Thanks, Mike