MX-3.com

fieromx3 wrote:i think its bad gas its common after storing it.. drain it all and put fresh stuff in it

x2

Put a liter of 70% rubbing alcohol in the tank and leave it for a day....unhook the lines from the pump and the fuel rail and blow them out....as that gas may have gel'd up...

it'll just burn off....

these are the colors it will change thru as the EGT goes up...

Temps are in C

is driving hatchless legal ?.

If so.....

plywould...aluminum sheet metal, spraybomb and plexiglass are on my shopping list....

my 1st thought was bleed it again... seeing as you replaced everything you'd need to have run atleast 300ml of fluid through the clutch to get all the air out...

Air can be compressed like 700x it's normal size before it gives any....

--As you said you have no leaks...bleed er till she's hard...

dude u adjust the play in the pedal?...

if you have it use it... (i've got a 95+BP...solid cover...it looks good...)

i only tweek on the dyno anyways so there's no point in taking the chance...

I am debating to either use the BPT ECU or a Stand Alone. I see that you used the stock ECU from the BPT, how's that working out? The only problem with me is that I dont have the wiring harness but that should'nt be too much of a problem. I don't wanna spend extra cash on a stand alone if its reall...

Ohhh 1 more question! How thick should the round bar be for a harness? well....literally SCHD 80 pipe or even 120...would be the best....almost no hole on the middle... -Solid round-stock isn't actually as strong as pipe as far as flex goes...only under compression and tension.. a piece of 1" ...

This is for jeff.. I'm in a position to produce this item... Albiet in limited numbers..The plans will be posted free of charge in JPG and CNC-Ready DWG.. So if you have access to a lathe and hacksaw/bandsaw..and 2" metal...Mind a machine shop would charge MUCH more... It allows a universal bar...

I already have a Tubular Rear strut tower bar...my next plan is to take that and your bar there and weld and weld them together ...in an open center X-brace... I'll probably be adding a drop-down from the upper seatbelt mount to the floor and then bolt onto the rear seat mounts...because your still ...

Custommx3 wrote:Dont expect too much of a response. What your asking is personal.

it's the internet....lie...

i work in IT making 400k a year....

Student/ Customer Service - Retail:
16-25k CAD

Graphite....charcoal base with dark-metal flake

little darker, little less blue..and more flake

I should be able to punch a couple out tommorow..

$20CAD+shipping

Hoodzy wrote:i love the inside door handles those are hot

omg seriously cars can be more attrative then women sometimes i tell yah

you have issues