My daughter's 93 MX3 passenger side window will not roll up. I would roll down, now sitting at the bottom or the run it will no roll up. I dod not suspect the switch and am hinking it is the motor. Do the symptoms sound familiar?
Any suggested ways to confirm this?
Thanks, Mike
Search found 34 matches
- June 5th, 2008, 8:29 pm
- Forum: Electrical & Lighting
- Topic: Power Window Problems
- Replies: 2
- Views: 168
- February 6th, 2008, 9:49 am
- Forum: V6 Technical/Performance
- Topic: Replace Power Steering Pump
- Replies: 3
- Views: 129
Re: Replace Power Steering Pump
Much appreciated.Trevor wrote:Yah it's pretty tight in there plus you have to consider bleed time as well
Thanks, Mike
- February 5th, 2008, 9:02 pm
- Forum: V6 Technical/Performance
- Topic: Replace Power Steering Pump
- Replies: 3
- Views: 129
Replace Power Steering Pump
I was quoted 2.7 hours to change the power steering pump. Does that sound right?
Mike
Mike
- January 20th, 2007, 8:39 pm
- Forum: MX-3 Related Items For Sale/Trade
- Topic: [FS] Clear Sidemarker Lights
- Replies: 18
- Views: 2506
- April 10th, 2006, 8:53 pm
- Forum: V6 Technical/Performance
- Topic: Distributor Diagnostic
- Replies: 2
- Views: 200
What happens is a hit or miss thing, so knowing luck, if you take it in, it won't act up in front of the mechanic. . Or when I go out and check it out. Started fine, warmed up, went for a drive. Got back home. Looks like I may do the HEI mod as a precaution. Are there any other symptoms of a distri...
- April 10th, 2006, 7:46 pm
- Forum: V6 Technical/Performance
- Topic: Distributor Diagnostic
- Replies: 2
- Views: 200
Distributor Diagnostic
I am pretty sure that my daughter's distributor has packed it in on her 93 MX3 V6. She can start it but when it warms up or has load put on it, it stalls. It start all of a sudden. Reading from other items in the forums it appears to be the distributor My question is if I pull the distributor out an...
- November 6th, 2005, 4:39 pm
- Forum: V6 Technical/Performance
- Topic: Interesting Rattle
- Replies: 2
- Views: 150
Interesting Rattle
My daughter asked me to look at her MX3. She has developed a rattle in the lower engine area. The rattle is present when the clutch is out, but when it is depressed it disappears. When in neutral, I can depress the clutch slowly and it seems to slowly subside (maybe something spinning?), then as I e...
- July 17th, 2005, 1:23 pm
- Forum: Electrical & Lighting
- Topic: heater control lights out
- Replies: 5
- Views: 483
Heater Light Out
I had the same problem, bulb had blown. I went to the Mazda dealer, found a similar one and replaced it. It was not identical, but hey, it works.
Mike
Mike
- July 17th, 2005, 1:16 pm
- Forum: MX-West Car Club (Vancouver, BC / Calgary, AB)
- Topic: Parting out car! Will deliver to Kelowna.
- Replies: 30
- Views: 2623
Sunroorf Guide
I need the left side forward sunroof guide. Mine is broken and needs to be replaced.
It can be removed with one screw. Are you interested in selling that part?
Thanks, Mike
It can be removed with one screw. Are you interested in selling that part?
Thanks, Mike
- July 10th, 2005, 3:05 pm
- Forum: MX-West Car Club (Vancouver, BC / Calgary, AB)
- Topic: Parts for sale
- Replies: 17
- Views: 3010
- June 8th, 2005, 12:00 pm
- Forum: General Mazda MX-3
- Topic: Sunroofs??
- Replies: 15
- Views: 922
- May 26th, 2005, 1:20 am
- Forum: Appearance
- Topic: Cleaning Headliner
- Replies: 5
- Views: 285
- May 23rd, 2005, 2:00 am
- Forum: Appearance
- Topic: Cleaning Headliner
- Replies: 5
- Views: 285
Cleaning Headliner
I need to clean the headliner in my car. Any suggestions as to product and process?
Thanks in advance,
Mike
Thanks in advance,
Mike
- April 19th, 2005, 1:19 am
- Forum: V6 Technical/Performance
- Topic: Radiator Question
- Replies: 1
- Views: 145
Radiator Question
Just installed a new (new to me) radiator in my 1.8 There are number of extra in and outs. Appears to be oil cooler? and maybe transmission cooler. It is all metal, no plastic sides. It also does not have a drain plug. Has anyone else encountered this type of radiator? Would there be any value to ha...
- February 1st, 2005, 5:07 pm
- Forum: V6 Technical/Performance
- Topic: axle SHAFT being a B**ch see Pg2
- Replies: 18
- Views: 595
Re: axle nut being a B**ch
i was having a hell of a time getting my axle nuts off with a big a-- breaker bar when it came to me........ i hope its not reverse thread and ive been tightening it the whole time !! :o so can somebody confirm, its lefty loosey on our axle nuts correct ? I just went to a local shop, had them looos...