MX-3.com

Sorry, didn't realize how horrible the pic's of the headlights were. Yes they are projectors, but someone has dibs (PM) I'll let you know if that doesn't work out.

PM's & Posts replied to

Thanks,
Cody

The timing belt jumped and I don't really have the time to work on this car anymore so it's time to go. Everything is for sale, as a whole or in pieces. Location is Rome (NW) GA. The drivers side power window switch works. The car has about 190k miles on it and the trans has about 80k (had about 70k...

I want em alll. Ignition/Doors/Trunk locks (I have two keys for my car and would prefer if it was just one)

Last bump. :/

Replied.

I've had this car for almost a year now and it's time for me to let it go. I don't have the time or money to work on it anymore. The car was sprayed flat black but has faded a bit. The pics are from when I first bought the car. (More recent ones can be taken on request But I have school and Work all...

Ordering the ones from Mazda-Parts.com. I knew you had to be able to get it somewhere. Thanks.

Going to take the Intake manifold off my 92 GS auto 1.8L to fix a vacuum leak and clean it out. Tried to buy a new gasket today at the auto parts store and they could not find a listing for one. Been searching on the internet and I cant find one either. Could someone point me in the right direction?

Been having problems with this car for a few days now. It ran fine on the way to work, but when I started it aftewards it was running really rough. Nursed it home and put it in the shop. Pulled the codes and it was giving 25 and 69. I replaced the Fan temp sensor for error 69 and don't really think ...

I pulled the black sensor off my running mx-3 and put it in this one and the fans run normally now but it still has revving issues, and still if I pull the wire off of the green temp sensor it runs fine(have already tried a replacement sensor). Also when you hit the gas you can hear a whistling nois...

1992 1.8L v6 auto. I'm pretty sure the car has put itself into limp mode. You can't accelerate very fast and you cant go very fast. You can rev the engine when it's in park but when you put it in drive the car sputters before it will start moving. It's throwing engine codes 25 and 69. If I unplug th...

It seams to have cleared up. It's been doing this all week. I loosened that bolt today, without moving the car the symptoms still remained, but once I got out and drove it a bit (With the now looser bolt), the shifting became smooth as silk.

Thanks!

I just put a new transmission in last week because the syncro's were going bad and two of the forks were worn out. Now it's hard to shift. It goes into gear smoothly without any grinding, the shifter just feels like there is a lot of friction. Side to side movement is sticky. If I move it left or ri...

This might be kinda late, but just for future reference, if you can't see some of the locally networked Windows PC's then Try this: (XP Instructions, but should be similar for other versions of windows.) Go to start and open up Control Panel Switch the control panel into Classic View, if it's not al...