MX-3.com

I will try reving it up and see if they open tommorow. My clutch is going, I am just waiting on receiving my new one and installing my new tranny, flywheel, and clutch. So if that dosen't fix it I can elliminate that. Another question? My car was origanally and Auto and I converted it. Will the KL_3...

Sorry do not know what the paper test is. I tried looking it up with no luck. Could you explain what I half to do?

Are their big difference's between the KL_31/KL_36?

I have the ZE with the curve neck. WE put it in about 3 months ago. A soon as I put the KL_36 ECU I lost it the VRIS. Before the I was running the KL_01 and it was working adiquitly. I was racing my friend who also has a ZE with the KL_31 ECU. We are together off the line the you hear his VRIS kick ...

1. Wash car 2. Sand old paint off (i would use 240 or 320 with a D/A 3. Apply body fill to bare metal 4. body filler sanding and shaping 5.Etch prime 6. High build primer 7. Sand primer with 320 8. Apply 4 coats of base (usually) 9. 2-3 coats of clear 10. Sand with light sand paper to remove orange ...

I've got you a hood, and will paint it this week. Have it ready for when you get back.

Yes they will. If not argue with them, or go to another shop. As long as nothing has been butchered to get them in then there should be no problem

Cowanville Wreckers in Newtonville (newcastle) has 5 of them when I was up there last weekend. Many doors in almost perfect shape. There is one teal V6 with 120,000 or so on it, but last time I saw it mostly every body panel was missing. There is a red 4cyl with only 60,000 km on it 1 black V6 1 bla...

If the stripping is not damaged, go to a body shop or glass shop and have them urathane it back down. It should not come back up one you have done that.

I do not suggest buying any of the factory stripping. It is usually exspensive. The Auto glass shop that I deal with has many different weather strippings that they buy in a role. It isn't identical to factory but does the job and only someone that is extremely hard core could tell the difference. I...

If you painting with acrylic enamel you should sand the surface with 320 If you are painting with Base Clear, you should finish with 500 (many body shops finish with 400 or even 320) Wet sanding is used mostly when just re-clear coating (blending area's) Make sure you use etch primer on any bare met...

sorry, I forgot that the 4cyl use a cable for the speedo, so you might better check with someone who has done the swap on a 4cyl.

It will feel like a different kind of car, well it did with my V6 anyways. Not like it has more power but you can select gear and its not slow shifting like a Auto.

You have all the parts listed you will need. You may need the drivers side transmission mount. I know you do on the V6's not sure about the 4cyl You shoulden't need the cluster, just take the hold light bulb out. On both the cars I converted to 5-speed I diden't need the Brake resevior either. But I...

Alright there are 2 larger black wires one with a yellow strip one with a red strip There are 4 smaller wires 1 red with a green strip 2 yellow, with a green strip 1 yellow with a black strip I have left the automatic shifter plug in place laying to the side. Do I leave the powertrain module pluged ...

Alright i'll go out and check, I know there are 3 wires that are yellow and 2 are black. But ill reply and be more specific. Another question is, what computer do I use? Thanxs

For a 1.8L V6, 1993