MX-3.com

Thank you so much guys ! This is why I love this site everyone helps out everyone. very good information. Im going to read that link now and then im sure ill be able to handle it from there. Thank you everyone !

Thanks guys ! But any idea how you would go about modifing my stock ecu ? inside the ecu or splice a wire, or do i have to replace a computer chip ? my only real goal is to increase my Redline. Im NOT trying to run 10,000 RPM, Just somthing a little higher. Im planning on swapping out my cams for ...

Hello people ! I have brought up a similar question before about RPM's and the ECU. My question Is, Is my B6 non - Turbo 1.6 DOHC Stock ECU Upgradable to the 88 - 89 323 GTX Performance ECU ? Or Maybe A Miata 1.6 ECU or even escort? I am Pretty good at anything Electrical so wiring up anything would ...

My suggestion is, to go with the meita cams. You can get good gains without putting to much money into it. Plus you wont have to dig deep into the motor to change them out, as its pretty easy to swap your stock cams out. Or just save your money and do the oh so common engine swap. Nitrous is always ...

Spray on sound deadner works just as well but requires alot of coats to reach the same effect. But the advantage is you can spray it just about everwhere, inside cracks ect. I Plan on sound insulating my whole car soon i have already done the doors with sprayon sound deadner and noticed a big drop ...

If you have to replace the cluth i would most defently recommend South Bend. I got mine for $170.00 us, its very smooth and very Strong. 300% stronger then stock, And their customer service is awsome. Just a recommendation in case it ever comes up. Good Luck

Hello ppl, Im planning on dynamating my most of my car like the inside of both doors, the floors and trunk but i have a few questions. I took a test drive on the highway yesterday just to figure out where most of the bothersom noise's where coming from, i noticed that most of the noise was coming ...

If you have checked all of your ignition conponets spark pugs,wires,car and rotor. and all your connectores are hooked up correctly like your mass sensor id bet on that vac line im not sure what vac line your talking about. maybe you could post a pic? if its the one that connects to the air intake ...

Ive had my clutch for about 1 year now. Bought it from South Bend. Stage 1, very very good clutch it can take alot of abuse and it still performs smooth like the stock clutch. Id recommend the to anyone. Good luck

All those are, is a 20 cent resistor that you can get at radio shack in a box with two wires that they sell to people for 20 30 even as high as 70 us dollars. the biggest rip off ive ever seen. You could get a simple cone filter for like 10 bucks us on ebay, and connect it to the end of your mass ...

Just wandering if the performance cams from corksport, from the 323 gtx will work on a DOHC Mx 1.6? And for $450.00 US with shipping, would the gains be worth it? I was thinking around 12 - 14 HP in the high RPM range? Any info would be great. Thanx

I know you can change them with the head on, But i would take the head off, its easier and you can get the head gasket at the same time. of course, if you just plan on changing the valve seals then leave the head on. If you do it the easy way and just take the head off all you would have to do then ...

Ya I had to change my my clutch soon after i got my mx. I went with south bend clutch. It sound like to me your not releasing the presure plate enough when you press the clutch therefor its not releasing the clutch disc and not putting your car in nutural. My first thought would be the cylinder. You ...

I would have suspested the valve seals first, but if they are new I would suspect the piston rings are worn if it only dose that when the engines cold. My mx dose the same thing untill it warms up, then i have no problem. The last car i had, had the same prob untill i replaced the seals. after that ...

ZEX Kit, good choice. I have heard alot of good things about ZEX nitrous systems. I think i will be getting one sometime soon, also a dry system. Single point dry injection kit is very easy to install from what i have heard.
Good Luck with the kit and install. Just hope corksport comes out somtime ...