MX-3.com

How can you tell if VRIS is Working or not?

Will brospeed headers for a ford probe 2.5L engine fit on a mx-3 kl-ze

are the kl-ze valve stem seal and piston rings the same as the northamerican 2.5L

It depends on how much work you want to do <BR>because the ones the don't come with the housing you have to heat up your stock like until the amber one comes off and then put the clear one on with apoxy but there is no promise that it would seal right <BR>so if you want to take the chance it is up t...

I will be there

what colour is the low beam wire <BR>thanks

Mine had the same problem and then I went to bigger rims and rubber 17inch and the problewm went away

they are different plugs when I got my kl-ze it had plugs in it and I matched the codes for the plugs up with ones from a mx-6 2.5 and they are different here is the code for the plugs you want NGK v-Power bkr6e-11

are probe v6 engine mounts the same as mx-3 v6 engine mounts?

Anyone know where I can get my ecu reprogrammed or get a kl-ze ecu in canada

No you don't need to swap sensors from one engine to another it will all connect into the wiring harness u can try probe talk but I would for a short time solution use your 1.8 or buy a 2.5 manifold and if you live in the toronto area go to a-spec and they will set u up but you can also look at a lo...

will I have to change my rad

Ok i have a mx-3 v6 and no I don't want the kl-ze I want the bpt that engine is sweet<BR>I just wanna know what I will have to do to get the engine in and working in my car <BR>will the 1.8L v6 and axles work?<BR>thanks

Kl-02 is not the kl-ze <BR>I had the north american 2.5L for a bit and it had some kl-02 markings on it

the compression on the kl-ze is 10:1 and at max I could only run 9 psi maybe to sure about that I will be doin the swap my self <BR>so it is all good<BR>anyone now a place in canada that sells the bpt