MX-3.com

You are most likely going to throw a rod. When you change your oil, it would be a good idea to drop the pan and if you see shavings, you know what is happening. You san try a flexible magnet if you do not want to drop the pan through the drain hole. The shavings are usually to heavy to come out with...

I have the folding power mirrors in teal, front lip in teal and the cruise control parts you will still need. I am in Thunder Bay Ontario Canada.

If you do the sea foam or kerosene thing, you should remove the oil pan when you drain it if your engine mileage is high. You will have a lot of crud in your pan, in fact, more than the drIn plug opening will allow out and enough to plug the oil pump intake and your noise will get real loud. Deterge...

I do have it, but it is larger than I thought. I guess shipping it from Thunder Bay will cost an 40.00 or so dollars. No change in my price 4.00 if you want it and I did take a pic of it..

I believe I have this and am going out to the car tomorrow to grab some parts. This is behind the bumper? Let me know . Shipping would be from Thunder Bay Ontario

I have possibly the rear and top mount brackets for the 1.8L tranny if that is what you need. My vehicles are all stock so I apologize if that is not what you are looking for. I will be going out to the car tomorrow, Let me know.. I am in Thunder Bay, shipping would be minimal.

I have this piece but need to look at the car as I cannot confirm the size from memory. If it is small and light enough, shipping would be very minimal. 4.00 and shipping through PP? I am going out tomorrow to grab another part for another member, Let me know

The upper rad hose is will leak from under the clamp on the engine side over time and on to the belts and will stink. It will give off a white smoke as well as it drips onto the belts and is spread around the engine front. You did not mention if the smoke was coming out of the exhaust but this was a...

I have the plastics, can't help with the belts out of a 93

If it does not turn out to the the fan itelf or the relay, the large connector for the main harness connector for the rad wiring harness is very susceptalbe to corrosion. This is right in front of or under the air filter housing. A good indication will be when you try and split it is if it does not ...

Kind of a dumb thing on my part and I was just to anxious but when I changed out my distributor, I attempted to run it with out all the lines and caps on the air intake and experienced exactly what you are saying. Even a small vacuum leak made a big difference as it just would not continue to idle..

Throttle Body did the the TRICK !!!! Thanks very much !!!

Throttle body was not carried over. The reason I am thinking it is not mechanical is because it does not happen all the time, just hot days.

I hear what you are saying but the cable would be a problem all the the time and not just hot days ..any other suggestions?

On hotter days like today, my throttle is sticking open and idling high. The strange thing is that I can reduce my rpm by placing my foor under my gas pedal, I can reduce the RPM. I have recently changed the engine and this problem carried over, so all engine sensors are different. This problem is u...