1.6 Mx-3 Header
-
- Junior Member
- Posts: 11
- Joined: March 30th, 2009, 10:27 pm
Re: 1.6 Mx-3 Header
This would be an awesome investment into a racecar. At our track were allowed to do headers and if you say it adds an extra 10 HP, then that would be excellent! Were rarely teched (in terms of taking the engines apart) so a miata cam would help out too HAH.
Back to the header though, again this would be an excellent addition to the car
Back to the header though, again this would be an excellent addition to the car
- PURPLEFLEA
- Junior Member
- Posts: 28
- Joined: May 25th, 2009, 9:37 pm
- antispam: No
Re: 1.6 Mx-3 Header
I'm in for $50.Anyone else???
Re: 1.6 Mx-3 Header
Yeahh.. i think so.
CF Hood, Kenwood everything, 2.25 catback exhaust, H&R Springs, F&B Strut bars
My worklog: http://mx-3.com/phpBB3/viewtopic.php?f=46&t=68856" onclick="window.open(this.href);return false;
Good afternoon from the biggest Douch around;D
My worklog: http://mx-3.com/phpBB3/viewtopic.php?f=46&t=68856" onclick="window.open(this.href);return false;
Good afternoon from the biggest Douch around;D
-
- Regular Member
- Posts: 55
- Joined: August 2nd, 2005, 12:50 pm
- Location: Vancouver, WA
- Contact:
Re: 1.6 Mx-3 Header
I am having problems getting the dyno sheet into a picture format. The peak hp gains are 8 whp and 3 torque on a stock 1.6 Mx3 DOHC. This is measuring just the peak power vs peak power. What that doesn't tell is the gains at higher RPM with the power does drop a bit. The torque gains at 6200 RPM is about 6 at the wheel comapared to stock. The HP gain at 6200 is 10 at the wheels compared to stock.
Derrick
Derrick
http://www.corksport.com for all your Mazda needs.
-
- Regular Member
- Posts: 55
- Joined: August 2nd, 2005, 12:50 pm
- Location: Vancouver, WA
- Contact:
Re: 1.6 Mx-3 Header
So we have 3 people interested here? I think I have several other guys from Spain and France interested as well. I am not sure if this enough to get us to 15 people.
http://www.corksport.com for all your Mazda needs.
Re: 1.6 Mx-3 Header
I'm interested, I've just been waiting on a rough estimate of the cost. I don't want to be dropping $400 on this thing when I could get a BP and/or a new suspension for less than that. I've never priced headers so $400 may be way too high.
Hey-yo chicken on a raft.
-
- Regular Member
- Posts: 55
- Joined: August 2nd, 2005, 12:50 pm
- Location: Vancouver, WA
- Contact:
Re: 1.6 Mx-3 Header
Here is the dyno sheet for the header.
http://www.corksport.com for all your Mazda needs.
- RS_OBD'oh_2
- Senior Member
- Posts: 2400
- Joined: April 9th, 2007, 1:26 pm
- Location: Calgary, AB
Re: 1.6 Mx-3 Header
nice.. Were I still NA, I'd be all over these.
-
- Regular Member
- Posts: 1603
- Joined: March 6th, 2007, 1:17 pm
- Location: Pittsburgh, Pennsylvania (USA)
Re: 1.6 Mx-3 Header
x2RS_OBD'oh_2 wrote:nice.. Were I still NA, I'd be all over these.
i'd be in, but I'm going to be boosting my BP
- mx-3_4evr
- Regular Member
- Posts: 609
- Joined: February 8th, 2008, 12:15 am
- Location: Burnsville,MN
- Contact:
Re: 1.6 Mx-3 Header
I e-mailed Corksport about a request on making a 1.8L BP header. Hope they make some
Re: 1.6 Mx-3 Header
i am also intersted, however it depends on the price of course.
I remember the Genie header went for a couple hundred dollars...
But you look at say, some stainless mx6 / probe headers, and one can pick them up for under a hundred.
If you price them modestly, they will sell, guaranteed.
The audience beyond mx-3.com for headers for the B6 is larger than you think.
I remember the Genie header went for a couple hundred dollars...
But you look at say, some stainless mx6 / probe headers, and one can pick them up for under a hundred.
If you price them modestly, they will sell, guaranteed.
The audience beyond mx-3.com for headers for the B6 is larger than you think.
-
- Regular Member
- Posts: 55
- Joined: August 2nd, 2005, 12:50 pm
- Location: Vancouver, WA
- Contact:
Re: 1.6 Mx-3 Header
The genie headers were $242 when we still had them available. That was for a mild steel header that terminated at the oil pan for the DOHC engines. The header we are proposing to build it a bit more expensive in material cost but not alot.
I think we should be able to get the 15 people needed to get them for the $299 price. Let me know with a post yes or no if you would be down for that.
Thanks
Derrick
I think we should be able to get the 15 people needed to get them for the $299 price. Let me know with a post yes or no if you would be down for that.
Thanks
Derrick
http://www.corksport.com for all your Mazda needs.
Re: 1.6 Mx-3 Header
They're good looking headers, but I can't afford them
- PURPLEFLEA
- Junior Member
- Posts: 28
- Joined: May 25th, 2009, 9:37 pm
- antispam: No
Re: 1.6 Mx-3 Header
Wow,Just did a currency exchange.If I'm right,and you're going by british pounds.I'll be looking at $493 plus shipping U.S. currency!!!!!! Is that right??
Re: 1.6 Mx-3 Header
no, it's 300 US currency, not pounds.
Corksport is based in US.
300 US is less in pounds
Corksport is based in US.
300 US is less in pounds