[FS] SRD Reproduction Parts - Crossmember, Tie Bar & E-Brake

wytbishop · Post by **wytbishop** » January 23rd, 2009, 2:51 pm

Every machine is just a liiiiittle bit different. So a tie bar that's tight on your car may not be perfectly tight on mine. Thats going to be my official perspective on the issue...until someone comes up with a better one...which I will quickly adopt.

BlaznLow · Post by **BlaznLow** » January 24th, 2009, 12:27 pm

fowljesse wrote:HI, Jim. I'm the guy who's going to try to beat them up There's a market for other Aluminum, and other metal stuff here!

enjoy beating the hell out of them. should be pretty fun.

what else is there that people want?

solo_ryder · Post by **solo_ryder** » January 24th, 2009, 12:35 pm

Well if you do the SRD stuff, alot of ppl are wanting bushings.. shifter ones, x-member ones..

fowljesse · Post by **fowljesse** » January 24th, 2009, 1:14 pm

Let's start a list!
Hey, Jim, you could start a new thread saying somrething like "What would you want michined out of Aluminum?"
I bet you'd sell a few B pillar bars, and front strut braces that fit over curved neck manifolds.

solo_ryder · Post by **solo_ryder** » January 24th, 2009, 1:18 pm

fowljesse wrote:Let's start a list!
Hey, Jim, you could start a new thread saying somrething like "What would you want michined out of Aluminum?"
I bet you'd sell a few B pillar bars, and front strut braces that fit over curved neck manifolds.

Good call on the Bpillar bars man, I would love that in my car. How about a KLZE specific strut tower bar?

fowljesse · Post by **fowljesse** » January 24th, 2009, 1:22 pm

Did you get bored, and skip over the last 9 words?

Post by **Mooneggs** » January 24th, 2009, 1:57 pm

fowljesse wrote:Did you get bored, and skip over the last 9 words?

HAHAHA lol... I agree though count me in for 2 b-pillar bars and 2 klze clearance front strut bars!

solo_ryder · Post by **solo_ryder** » January 24th, 2009, 2:06 pm

HAHA FAIL, sorry I just woke up when I posted that. DOH, but yea, I want a both

BlaznLow · Post by **BlaznLow** » January 24th, 2009, 2:20 pm

i need pics of these things to see what they look like

fowljesse · Post by **fowljesse** » January 24th, 2009, 2:37 pm

That's the thing. They haven't been made, yet. You would have to use one of the MX-3s around, and fab them.

BlaznLow · Post by **BlaznLow** » January 24th, 2009, 2:40 pm

for everything that you listed? someone must have some of the other srd stuff

solo_ryder · Post by **solo_ryder** » January 24th, 2009, 2:41 pm

Well the Bpillar and the ZE specific strut bars were never made by anyone.. that's the thing. As for the bushings and whatnot, I am sure someone can volunteer them to be reproduced.

mitmaks · Post by **mitmaks** » January 24th, 2009, 2:47 pm

what about SRD ebrake handle?

colinsmx3 · Post by **colinsmx3** » January 24th, 2009, 2:53 pm

The 96 Vibrant Neon strut bars you can find on ebay work very well and look great and clear the ZE manifold! You just have to cut 1/4 inch off each end and it threads into the normal ractive MX-3 braces. I can post pics if you want to see.

solo_ryder · Post by **solo_ryder** » January 24th, 2009, 3:13 pm

Please

MX-3.com

[FS] SRD Reproduction Parts - Crossmember, Tie Bar & E-Brake

Re: [GI] Aluminum Crossmember & Rear Tie Bar - SRD Reproduction

Re: [GI] Aluminum Crossmember & Rear Tie Bar - SRD Reproduction

Re: [GI] Aluminum Crossmember & Rear Tie Bar - SRD Reproduction

Re: [GI] Aluminum Crossmember & Rear Tie Bar - SRD Reproduction

Re: [GI] Aluminum Crossmember & Rear Tie Bar - SRD Reproduction

Re: [GI] Aluminum Crossmember & Rear Tie Bar - SRD Reproduction

Re: [GI] Aluminum Crossmember & Rear Tie Bar - SRD Reproduction

Re: [GI] Aluminum Crossmember & Rear Tie Bar - SRD Reproduction

Re: [GI] Aluminum Crossmember & Rear Tie Bar - SRD Reproduction

Re: [GI] Aluminum Crossmember & Rear Tie Bar - SRD Reproduction

Re: [GI] Aluminum Crossmember & Rear Tie Bar - SRD Reproduction

Re: [GI] Aluminum Crossmember & Rear Tie Bar - SRD Reproduction

Re: [GI] Aluminum Crossmember & Rear Tie Bar - SRD Reproduction

Re: [GI] Aluminum Crossmember & Rear Tie Bar - SRD Reproduction

Re: [GI] Aluminum Crossmember & Rear Tie Bar - SRD Reproduction