Ryan - 1993 Black BP RS-RIP
-
- Supporting Member
- Posts: 281
- Joined: April 15th, 2008, 10:04 pm
- Location: Western NY
Re: Ryan - 1993 Black RS
If you grab a nice Protege BP harness I believe its completely plug and play, no wire splicing needed (that is a 5 speed harness). No that capri is more a mustang than anything. Plus I wouldn't swap the 5th gear from a capri into your car, I took it because it was the only car there that had the right gear. It only drops the rpm's 500. 70 mph is about 4k.
- Ryan
- Senior Member
- Posts: 7198
- Joined: April 7th, 2008, 1:06 pm
- antispam: ~SPAM*SUX~
- Location: Manitoba
Re: Ryan - 1993 Black RS
Since I'm a SOHC, it is plug and play minus the VICS wires.
Last edited by Ryan on September 21st, 2008, 5:43 pm, edited 1 time in total.
Now with Moderator power!
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
-
- Supporting Member
- Posts: 281
- Joined: April 15th, 2008, 10:04 pm
- Location: Western NY
Re: Ryan - 1993 Black RS
And the extra wire for the Disty.
- Ryan
- Senior Member
- Posts: 7198
- Joined: April 7th, 2008, 1:06 pm
- antispam: ~SPAM*SUX~
- Location: Manitoba
Re: Ryan - 1993 Black RS
What is this wire for? Thanks for the heads up...
Now with Moderator power!
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
Re: Ryan - 1993 Black RS
I like the stock hight of the MX-3. If the roads in your area are anything like in my town you'd just beat the front lip off anyway if you lowered your car. I want to move close to your wrecking yard. Mine hasn't got squat.
2004 Subaru WRX Silver, stage 2, minty interior.
2002 Subaru WRX Blue, SOLD (best E test numbers I've ever seen)
94 MX-6. Sold
92 GS KLZE 5 Speed
96 GS 5 speed, KLZE, Sold
95 GS Minty Shape Sold
92 GS Sold
92 GS Parts Car scrapped.
Feedback viewtopic.php?f=37&t=66348" onclick="window.open(this.href);return false;
7477th member.
I know you believe that you understand what you think I said but I'm sure you realize that what you heard is not what I meant.
2002 Subaru WRX Blue, SOLD (best E test numbers I've ever seen)
94 MX-6. Sold
92 GS KLZE 5 Speed
96 GS 5 speed, KLZE, Sold
95 GS Minty Shape Sold
92 GS Sold
92 GS Parts Car scrapped.
Feedback viewtopic.php?f=37&t=66348" onclick="window.open(this.href);return false;
7477th member.
I know you believe that you understand what you think I said but I'm sure you realize that what you heard is not what I meant.
-
- Supporting Member
- Posts: 281
- Joined: April 15th, 2008, 10:04 pm
- Location: Western NY
Re: Ryan - 1993 Black RS
something like signal to or from the ECU, you will need it for the car to run. you can add the pin to your existing plug, there is a foam plug in there, just pull it out, and shove a new pin in there.
- Ryan
- Senior Member
- Posts: 7198
- Joined: April 7th, 2008, 1:06 pm
- antispam: ~SPAM*SUX~
- Location: Manitoba
Re: Ryan - 1993 Black RS
I suppose... I could find the pin No. in the BP protege shop manual, eh? I have access to that.
Also,
Today I am trying something new. I'm doing bumper work. I'm repairing using a black urethane and some finer (1/8" grid) metal mesh. Its working pretty good so far. I got the highest adhesion and 50% flex. Its really nice for working on the back side of cracks, and I'm also filling in the holes left be removing the OEM grill. As soon as that stuff dries, I'm putting in my Fiat grill, and I hope its sexy. I would have pictures, but I gave the GF back her camera... why, I don't know....
Also,
Today I am trying something new. I'm doing bumper work. I'm repairing using a black urethane and some finer (1/8" grid) metal mesh. Its working pretty good so far. I got the highest adhesion and 50% flex. Its really nice for working on the back side of cracks, and I'm also filling in the holes left be removing the OEM grill. As soon as that stuff dries, I'm putting in my Fiat grill, and I hope its sexy. I would have pictures, but I gave the GF back her camera... why, I don't know....
Now with Moderator power!
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
-
- Supporting Member
- Posts: 281
- Joined: April 15th, 2008, 10:04 pm
- Location: Western NY
Re: Ryan - 1993 Black RS
I have a PDF of the protege Manual i could aim to you if you want it.
- Ryan
- Senior Member
- Posts: 7198
- Joined: April 7th, 2008, 1:06 pm
- antispam: ~SPAM*SUX~
- Location: Manitoba
Re: Ryan - 1993 Black RS
No, no worries, I just need to go to work, walk into the back, and pull out the paperback.
And my urethane needs to be WAY harder. This was a bust. I should aim for durathane, I think, but I couldn't find it anywhere? Crappy tire and an local construction/home reno store.... boo!
If colour doesn't matter, use construciton adhesive. that stuff is awesome. bonds to anything, wet or dry. Use it between concrete and steel, and the concrete will break
And my urethane needs to be WAY harder. This was a bust. I should aim for durathane, I think, but I couldn't find it anywhere? Crappy tire and an local construction/home reno store.... boo!
If colour doesn't matter, use construciton adhesive. that stuff is awesome. bonds to anything, wet or dry. Use it between concrete and steel, and the concrete will break
Last edited by Ryan on December 30th, 2008, 12:45 am, edited 1 time in total.
Now with Moderator power!
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
-
- Supporting Member
- Posts: 281
- Joined: April 15th, 2008, 10:04 pm
- Location: Western NY
Re: Ryan - 1993 Black RS
3M window Weld seems to be the product of choice for Urethane.
- Ryan
- Senior Member
- Posts: 7198
- Joined: April 7th, 2008, 1:06 pm
- antispam: ~SPAM*SUX~
- Location: Manitoba
Re: Ryan - 1993 Black RS
It seems I want something that hardens to near-rock-hard. That stuff fits that description?
Now with Moderator power!
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
- Ryan
- Senior Member
- Posts: 7198
- Joined: April 7th, 2008, 1:06 pm
- antispam: ~SPAM*SUX~
- Location: Manitoba
Re: Ryan - 1993 Black RS
I noticed something today. My car always fires after turning over 4 times.
turn, turn, turn, turn, fire & start.
It used to fire on the first turn, but then I swapped I/M, TB, fuel rail, and one injector. I know the parts I added were good, because I have had them running before I swapped my motor.
Any guesses to why this is?
Edit, update
Grill
Ride height.
My car, as of yesterday
Just kidding, its my brothers beater that we accidentally rode up on a bale and caught fire...
turn, turn, turn, turn, fire & start.
It used to fire on the first turn, but then I swapped I/M, TB, fuel rail, and one injector. I know the parts I added were good, because I have had them running before I swapped my motor.
Any guesses to why this is?
Edit, update
Grill
Ride height.
My car, as of yesterday
Just kidding, its my brothers beater that we accidentally rode up on a bale and caught fire...
Last edited by Ryan on December 30th, 2008, 12:48 am, edited 1 time in total.
Now with Moderator power!
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
- Ryan
- Senior Member
- Posts: 7198
- Joined: April 7th, 2008, 1:06 pm
- antispam: ~SPAM*SUX~
- Location: Manitoba
Re: Ryan - 1993 Black RS
-----
Last edited by Ryan on April 10th, 2009, 3:14 pm, edited 2 times in total.
Now with Moderator power!
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
- Ryan
- Senior Member
- Posts: 7198
- Joined: April 7th, 2008, 1:06 pm
- antispam: ~SPAM*SUX~
- Location: Manitoba
Re: Ryan - 1993 Black RS
-----
Last edited by Ryan on April 10th, 2009, 3:15 pm, edited 2 times in total.
Now with Moderator power!
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
- Jovian2k
- Supporting Member
- Posts: 851
- Joined: June 3rd, 2004, 2:01 am
- Location: La Prairie, QC + Stratford, CT
Re: Ryan - 1993 Black RS
You can use this intake adapter, should work. I know it was included with my CAI kit so I didn't need to buy one.
http://cgi.ebay.com/ebaymotors/92-93-MA ... 0087911203
http://cgi.ebay.com/ebaymotors/92-93-MA ... 0087911203