Cluster/Speedo Rings
Cluster/Speedo Rings
I've been looking for something to do to my cluster, but I'm really not a fan of the glow gauges. I've ordered some high intensity LED's which I plan on wiring in, but I also found this post. I love the look of those rings. He says he got his from ebay (here) but I would imagine this wouldn't be too hard to fabricate. Has anybody tried anything like this? I've spent hours and hours (way too many, actually) looking around on this site, and I haven't seen anything like it. Anybody?
Does anybody have any idea how those even stick on to the cluster?
Does anybody have any idea how those even stick on to the cluster?
Worklog! - updated Jun/26
- Jovian2k
- Supporting Member
- Posts: 851
- Joined: June 3rd, 2004, 2:01 am
- Location: La Prairie, QC + Stratford, CT
Re: Cluster/Speedo Rings
May be able to fabricate, but these rings are perfect fit and require very little time to install. They fit in to the border of the gauges nicely, but they do not stay. I had to use a bit of super glue to get them to stay properly. keep your eye on eBay listed under that international seller, they are a very nice, tasteful upgrade ![Smile :)](./images/smilies/icon_smile.gif)
![Smile :)](./images/smilies/icon_smile.gif)
- Ryan
- Senior Member
- Posts: 7198
- Joined: April 7th, 2008, 1:06 pm
- antispam: ~SPAM*SUX~
- Location: Manitoba
Re: Cluster/Speedo Rings
Day after tomorrow, I will get into my car with some calipers and paper, draft up some sort of schematic, machine it out of plexi or aluminum, and depending on my fastening options... decide to glue it, or find/make a clip system. I'll post again on weds/thurs.
Now with Moderator power!
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
Re: Cluster/Speedo Rings
Definitely love the look. Is there anybody else on ebay with them? As much as I love the tasteful, I love the cheap even more.
Ryan - according to the ebay site, the rings are 8.0 and 9.5cm diameter if that helps you at all... If they work out, I'd be more than willing to pay you for a set.
If it was me, I would make them a tad taller than the ones over at ebay, and possibly slope so they're taller at the top than the bottom. But that's just me haha. Definately let me know what you come up with. ![Very Happy :D](./images/smilies/icon_biggrin.gif)
Ryan - according to the ebay site, the rings are 8.0 and 9.5cm diameter if that helps you at all... If they work out, I'd be more than willing to pay you for a set.
![Very Happy :D](./images/smilies/icon_biggrin.gif)
![Very Happy :D](./images/smilies/icon_biggrin.gif)
Worklog! - updated Jun/26
- Ryan
- Senior Member
- Posts: 7198
- Joined: April 7th, 2008, 1:06 pm
- antispam: ~SPAM*SUX~
- Location: Manitoba
Re: Cluster/Speedo Rings
Do you know if that is inside or outside diameters?
Okay, I've written programs that work relatively well. Should I make a thread on custom orders?
Okay, I've written programs that work relatively well. Should I make a thread on custom orders?
Now with Moderator power!
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
Re: Cluster/Speedo Rings
Doesn't specify, but I would imagine that's outside diameter.
If other people are interested, go ahead. How much do you see these costing?
If other people are interested, go ahead. How much do you see these costing?
Worklog! - updated Jun/26
- Mooneggs
- Forum Moderator
- Posts: 6128
- Joined: August 10th, 2005, 10:08 pm
- antispam: ~SPAM*SUX~
- Location: Hillsboro, OR
- Contact:
Re: Cluster/Speedo Rings
I would be down for a set... I think it would look nice in my slow car to match the other aluminum accents.
My Feedback
92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs
![Image](http://i806.photobucket.com/albums/yy344/Mooneggz/laguna_seca_signature.jpg)
92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs
![Image](http://i806.photobucket.com/albums/yy344/Mooneggz/laguna_seca_signature.jpg)
- Ryan
- Senior Member
- Posts: 7198
- Joined: April 7th, 2008, 1:06 pm
- antispam: ~SPAM*SUX~
- Location: Manitoba
Re: Cluster/Speedo Rings
depending on where I can get materials, probably just the shipping.... or you could chuck in a few bucks to the site.
Edit - my lazy program so far
![Image](http://img360.imageshack.us/img360/5117/dia9mk5.png)
Edit - (I edit because I am post happy)
Okay, I've decided, shoot me a PM with what you want, prefered thicknesses, i believe aluminum will be my best bet, I've got an in on (hopefully) free materials tomorrow at 10:00a.m. ish. Um... maybe a section of it, if you want it sloped instead of square, or maybe you want it rounded on top.... anything you can think of, i'll let you know what I can do. Also, tonight i'll measure the guages for sure, know the distance between the needle tip and inside of the guage, and space between the guages.... I think all our clusters are the same?
Edit - my lazy program so far
![Image](http://img360.imageshack.us/img360/5117/dia9mk5.png)
Edit - (I edit because I am post happy)
Okay, I've decided, shoot me a PM with what you want, prefered thicknesses, i believe aluminum will be my best bet, I've got an in on (hopefully) free materials tomorrow at 10:00a.m. ish. Um... maybe a section of it, if you want it sloped instead of square, or maybe you want it rounded on top.... anything you can think of, i'll let you know what I can do. Also, tonight i'll measure the guages for sure, know the distance between the needle tip and inside of the guage, and space between the guages.... I think all our clusters are the same?
Now with Moderator power!
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
Re: Cluster/Speedo Rings
could just buy it now...
http://cgi.ebay.com/Mazda-323-MX3-90-94 ... m153.l1262" onclick="window.open(this.href);return false;
http://cgi.ebay.com/Mazda-323-MX3-90-94 ... m153.l1262" onclick="window.open(this.href);return false;
- Mooneggs
- Forum Moderator
- Posts: 6128
- Joined: August 10th, 2005, 10:08 pm
- antispam: ~SPAM*SUX~
- Location: Hillsboro, OR
- Contact:
Re: Cluster/Speedo Rings
even though you talk about doing it just for the price of shipping you may want to clear this with Jeff before proceeding because this could turn into a "group buy"....
My Feedback
92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs
![Image](http://i806.photobucket.com/albums/yy344/Mooneggz/laguna_seca_signature.jpg)
92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs
![Image](http://i806.photobucket.com/albums/yy344/Mooneggz/laguna_seca_signature.jpg)
- Custommx3
- Site Administrator
- Posts: 8391
- Joined: November 7th, 2000, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Lat 35.1N Lon -90W
- Contact:
Re: Cluster/Speedo Rings
ALL sales, unless a one-off personal property, must be OK'd by Jeff. Selling products for personal gain is prohibited and will lead to banishment. Please email Jeff @ phpbb@mx-3.com" onclick="window.open(this.href);return false;
thanks
thanks
- Ryan
- Senior Member
- Posts: 7198
- Joined: April 7th, 2008, 1:06 pm
- antispam: ~SPAM*SUX~
- Location: Manitoba
Re: Cluster/Speedo Rings
So I e-mailed our friend Jeff, there....
I got into my cluster today, and mauled it pretty good trying to wedge my caliper in there. Got the measurements though
If I AM allowed to distribute these, I won't charge anything but shipping... and depending whether i'm allowed, and maybe a tiny bit to offset the materials cost (if need be) versus $35 + shipping from ebay...
They should be relatively perfect.... the router i'm using is good to 1/4000 of an inch....
On another note, does anyone know how to actually remove the cluster? I think my speedo cable is holding it back... I searched, and I got somethign about reaching my hand in behind to unclip it. Unless you're a barbie or can change your bone structure, there is no way to get your hand back there. I don't need to know, I'm just curious.
Edit - someone with a spare cluster lying around, wanna help me out?
I need measurements... mine don't match up after drafting.
I need.... space between centres of RPM and speedo
Smallest space between outermost edges of speedo and RPM. They are chamfered, I want the measurement from the point where it becomes level to the face, not the measurement between the edges of the paper with the numbers on it...
and to double check the others, diameter of paper peices of both RPM and speedo
diameter of outermost edges on both speedo and RMP and if you're super talented, the depth of the plastic, and the depth to the bottom edge of the chamfer.
Thanks. I hate measuring it while its in the car.![Evil or Very Mad :evil:](./images/smilies/icon_evil.gif)
I got into my cluster today, and mauled it pretty good trying to wedge my caliper in there. Got the measurements though
![Smile :)](./images/smilies/icon_smile.gif)
They should be relatively perfect.... the router i'm using is good to 1/4000 of an inch....
On another note, does anyone know how to actually remove the cluster? I think my speedo cable is holding it back... I searched, and I got somethign about reaching my hand in behind to unclip it. Unless you're a barbie or can change your bone structure, there is no way to get your hand back there. I don't need to know, I'm just curious.
Edit - someone with a spare cluster lying around, wanna help me out?
I need measurements... mine don't match up after drafting.
I need.... space between centres of RPM and speedo
Smallest space between outermost edges of speedo and RPM. They are chamfered, I want the measurement from the point where it becomes level to the face, not the measurement between the edges of the paper with the numbers on it...
and to double check the others, diameter of paper peices of both RPM and speedo
diameter of outermost edges on both speedo and RMP and if you're super talented, the depth of the plastic, and the depth to the bottom edge of the chamfer.
Thanks. I hate measuring it while its in the car.
![Evil or Very Mad :evil:](./images/smilies/icon_evil.gif)
Now with Moderator power!
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
Re: Cluster/Speedo Rings
The cluster really isn't too hard to get out.. The space isn't the greatest and you definitely have to do it by feel, but its not too difficult. If you remove the dash and the steering column cover, you can get it out far enough to stick a hand back there. If you haven't figured it out by tomorrow afternoon when I'm home from school, I'll take mine out and try to get the measurements you need. But by your description below, I really have no idea what your looking for. Could you make a little clearer, or even draw out a nice little diagram in paint showing what you need?
Edit - on a second thought. Why don't I just grab the cluster, stick it in my scanner, and send the picture to you? Seems ridiculously simple, but I don't know why it wouldn't work.
Edit - on a second thought. Why don't I just grab the cluster, stick it in my scanner, and send the picture to you? Seems ridiculously simple, but I don't know why it wouldn't work.
Worklog! - updated Jun/26
- Ryan
- Senior Member
- Posts: 7198
- Joined: April 7th, 2008, 1:06 pm
- antispam: ~SPAM*SUX~
- Location: Manitoba
Re: Cluster/Speedo Rings
One step better ![Smile :)](./images/smilies/icon_smile.gif)
![Image](http://img74.imageshack.us/img74/8753/alldl2.th.png)
The whole thing... oh and i forgot to ask for diameter of speedo. dope. inside and out!
![Image](http://img74.imageshack.us/img74/1298/79214361fd9.th.png)
Close up of what I want - the space between guages
![Image](http://img231.imageshack.us/img231/9861/sidesy2.th.png)
side view of tach, showing chamfer. i would like measurements of the inside and outside edges of the chamfer for both speedo and tach. I believe the difference should be 2mm between inside edge and furthest out edge of the chamfer...
oh, and space between needles and inside edges?
If you still don't get it... then.... idk.
And to anyone who realizes how poorly done that is, I really do know better, but I'm lazy![Smile :)](./images/smilies/icon_smile.gif)
![Smile :)](./images/smilies/icon_smile.gif)
![Image](http://img74.imageshack.us/img74/8753/alldl2.th.png)
The whole thing... oh and i forgot to ask for diameter of speedo. dope. inside and out!
![Image](http://img74.imageshack.us/img74/1298/79214361fd9.th.png)
Close up of what I want - the space between guages
![Image](http://img231.imageshack.us/img231/9861/sidesy2.th.png)
side view of tach, showing chamfer. i would like measurements of the inside and outside edges of the chamfer for both speedo and tach. I believe the difference should be 2mm between inside edge and furthest out edge of the chamfer...
oh, and space between needles and inside edges?
If you still don't get it... then.... idk.
And to anyone who realizes how poorly done that is, I really do know better, but I'm lazy
![Smile :)](./images/smilies/icon_smile.gif)
Now with Moderator power!
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback