can you use k8 EGR system for KLZE with no EGR
-
- Regular Member
- Posts: 202
- Joined: January 9th, 2004, 2:01 am
- Location: Oshkosh, Wisconsin
can you use k8 EGR system for KLZE with no EGR
I'm planning to go ZE now and I was wondering if you could use the stock k8 exhaust manifold with the EGR on the ZE if it is blocked off. Can I just run without it too?
MX3 KL-DE, probe/mx6 ebay turbo pipes, T3/T4 50 trim @ 8psi, millenia injectors, SAFC2, intercooled,Greddy RS BOV, turbonetic 38mm external wastegate. Wisco 9.5 forged piston, millenia S rods, and high performance rings coiming in soon. Shooting for 400whp this summer.
Re: can you use k8 EGR system for KLZE with no EGR
it all seem pretty much interchangeable - I run a KLZE with the K8 EGR tubes & exhaust manifolds - no problem with emissions testing or with any fault codes.
Re: can you use k8 EGR system for KLZE with no EGR
yes
1994, GS, KLZE, 67mm TB, LightFlywheel, Centreforce Stg 3 Clutch, CAI, KL36 ecu, B&M shortshifter, Solid poly mounts, lightweight Aluminum Cross memeber, 2.5 high flo cat, 2.5 all back, Tanabe Exhaust, optima battery, ZX2 HD tokicos, eibach prokit, black altezzas.....
http://www.modifiedmazda.com" onclick="window.open(this.href);return false;.
http://www.modifiedmazda.com" onclick="window.open(this.href);return false;.
Re: can you use k8 EGR system for KLZE with no EGR
See this thread:
http://www.mx-3.com/ubb/ultimatebb.php?ubb=get_topic;f=15;t=004854
http://www.mx-3.com/ubb/ultimatebb.php?ubb=get_topic;f=15;t=004854
Re-shaped and re-sized gearshift lever. Best driveability mod you can do!
Extra thick soundproofing in the boot (trunk) to quieten my stainless steel exhaust system
Extra thick soundproofing in the boot (trunk) to quieten my stainless steel exhaust system
-
- Regular Member
- Posts: 202
- Joined: January 9th, 2004, 2:01 am
- Location: Oshkosh, Wisconsin
Re: can you use k8 EGR system for KLZE with no EGR
I'm getting a curved neck ZE. I was told that the egr port was blocked off does that mean that it doesn't have egr or is it just blocked off. If everything fits than I'll use my stock k8 exhaust manifolds.
MX3 KL-DE, probe/mx6 ebay turbo pipes, T3/T4 50 trim @ 8psi, millenia injectors, SAFC2, intercooled,Greddy RS BOV, turbonetic 38mm external wastegate. Wisco 9.5 forged piston, millenia S rods, and high performance rings coiming in soon. Shooting for 400whp this summer.