MX-3.com

Just like the topic says how do i do it?

I am currently using royal purple 75-90. The shfts are alot easier not as notchy. I would recommend it.

how much for the subs alone

So you are telling me the solenoids are different? If so can i get some ze solenoids? I haveopened the hood and visually watched he vris open and close, i know they work but at the right time is my question? I could probably reference it with the online manual. F-2 100 Any feed back would thanks Steve

The motor has 145k miles on it i just pulled it to put the ze in. It ran fine burnt a 1/2 quart of oil between the oil changes will sell complete or part out. Need to get rid of by next weekend or i will be forced to junk it.

When i put my ze inthe two solenoids were broke on my ze so i just swapped over from my k8. I knw they are justsolenoids and can only be operated when the ecu sends them power but my question is are they different. Could i not be getting the right vris valve opening at the right time causing me to l...

I think i have play in my suspension. Sometimes when i am riding down the road i feel a constant bounce like my struts are messed up. I have a vibration but it is very small. You know the car is 11 years old its about time for everything to wear out.

Just get a foot long peice of tube and one 90 degree bend. You need 4 couplings 3 3in. to 3 in. ad one 2.5 to 3 to hook to your throttle body. You shouldnt have any problem with it being down to low i ha a hole cut in my bottom splash guard and my filter stuck in it. You can see it from undrneath th...

Thanks for the insight. Probably going to try to get it installed this weekend. Should i go for theuniversal one 2.25in. ?

Just wonderin what i should do, headers and a high flow cat next or should i go with a fpr. I have seen where the headers might give you 6-7 hp and i know my cat is full of S***!! Or should i go with a fpr for now? I am guessing the cat and headers with 2.5 in. exhaust ( currently have 2.25) wil pro...

I called my shop the other day and they said that they couldnt trace back what axle i got. All i can remember is that its about 3/8 in. shorter. Wish i could help more. I also changed my lower ball joints b4 i went with the axle, i still have a very little vibration though i cant feel it in the stee...

Just like the topic says i was wondering if you can put a breather on the pcv valve. The reason being my vacum lines are all f***ed up after the swap. Thats what happens when you dont take yor time and label things. Anyways thanks for any feed back and i did do a search!

I needan a/c condensor!!!

It took us (3 men) 4 hours to pull the k8 and about 12-14 to put it back. None of us had ever done an import but my two buddies were prety versed in domestics. The only regret i have is i put a CM stage 1 , it was free with the car, and now it slips F***!

It would be nice if someone would help. What bracket did everyone else use , i know you hae to do a little cuttin just need a little direction, thanks steve