MX-3.com

hi mx lovers. i had many problems with my klze. but it isnt over yet. my car was fine until i was home,then the trouble begon. first i had no spark. changed the disty-spark plugs and wires-hei module and wiring i had no ecu trigger signal cleared the earth points and now i have a ecu trigger signal ...

i had the hei module before when the trouble strarted i bought a new hei. the problem didnt resolve. i have a kf ignition with extrernal coil. have 4 wires in my disty http://i911.photobucket.com/albums/ac311/mx3racer/IMAG0869_zps219cd0b0.jpg disty connector earth. 12volt. 5volt. pulses 6 times in 3...

hello guys, i have a big problem i have no spark the couse is no g signal to the hei module. i checked my crackshaft pisition sensor and it is 560 ohm,that should be ok. i checked the connection form the orange g singal wire back to point 3G from the ecu and thats ok. what could this be? plz help me...

i have looked for a broken wire from 3G(ecu) to the hei
the wire is good and not broken.

the ecu makes the g signal
but how does he make it?

im desperate!!


greetings kevin

hi all i have this problem for 2 months now. and yesterday started the car whas sitting still for 2 months,and started right up strange whas broken left alone. the car started but stumbles the problem is back car idles down and stops. restart the klze no life left. get no ecu trigger G to hei---no s...

the fuel lines are not reversed i drove more than a year like this.

any 1 got a idea?

fuel lines are correctly mounted i have fuel pressure at my rail but my spark plugs are dry i think that my injectors wont open if i detach my fuel relais the car starts but runs extremly rough and when i touch the gas i dies i mesured also the vaf open 200 ohm half way around 740 and deeper in it d...

checked the relay and even bypassed it(green to ground) and its ok it switches.


what can this be?

i read my ecu i get no trigger codes

hi all i have a problem i have a hei mod and external coil but it wont fire up. i have a pulse signal on my hei to coil an the coil fires if i hold the end to earth if i hold it above my connection point on my disty almost no spark no earth at the disty? checked the rotor checked the disty cap check...

i routed the wire back and it whas a earth wire they ar all going to 1 kable in the harnas.
but still no start

have spark from my coil but not on my plugs

i made a new earth wire i spitted id and now i got a spark from my coil. yeah!!!
but i have no spark on my spark plugs


sanded the contact points and rotor
is the disty broken?

when i start the car i get no pulse signal to my coil
i get 12v on coil+ and coil - thats ok,but while i am crancking coil - should give ground pulses.
but i dont get them.

i have pulse to the hei
have earth
have power on the coil

is my hei broken already?

greetings kevin

i was and looking for it in the manual but i cant find it