i have some questions.
im wirring my hei mod(again)
now i solder the connections for good
but i have no spark i dont know why
can you help me check the wires?
this is how i wired
![Image](http://i911.photobucket.com/albums/ac311/mx3racer/MazdaMX3KLZEHEIModWiringDiagram.jpg)
redrawn the wire diagram
![Image](http://i911.photobucket.com/albums/ac311/mx3racer/IMAG0507.jpg)
Orange Ignition pulse ----> W
![Image](http://i911.photobucket.com/albums/ac311/mx3racer/IMAG0493.jpg)
the Hei Earth ---> G--->hei mountin point.
![Image](http://i911.photobucket.com/albums/ac311/mx3racer/IMAG0494.jpg)
Yellow blue.tach signal ---->1k---> (go to coil - red)
![Image](http://i911.photobucket.com/albums/ac311/mx3racer/IMAG0495.jpg)
red coil- --->coil ---> C
![Image](http://i911.photobucket.com/albums/ac311/mx3racer/IMAG0501.jpg)
the disty
![Image](http://i911.photobucket.com/albums/ac311/mx3racer/IMAG0503.jpg)
coil and hei
![Image](http://i911.photobucket.com/albums/ac311/mx3racer/IMAG0499.jpg)
but where are these from
![Image](http://i911.photobucket.com/albums/ac311/mx3racer/IMAG0496.jpg)
![Image](http://i911.photobucket.com/albums/ac311/mx3racer/IMAG0497.jpg)
connect them?
![Image](http://i911.photobucket.com/albums/ac311/mx3racer/IMAG0502.jpg)
made the new hei wires
Hei Coil + and Coil - Connection to Hei
![Image](http://i911.photobucket.com/albums/ac311/mx3racer/IMAG0506.jpg)
Coil+ and Coil- +tacho connection(inside fuse box 1k ohm)
![Image](http://i911.photobucket.com/albums/ac311/mx3racer/IMAG0504.jpg)
the connection to original harnas( tacho coil + and coil-
![Image](http://i911.photobucket.com/albums/ac311/mx3racer/IMAG0513.jpg)