Search found 126 matches
- October 19th, 2014, 10:30 am
- Forum: V6 Technical/Performance
- Topic: Help with CEL codes
- Replies: 6
- Views: 2665
Re: Help with CEL codes
[quote="SuperK"]67- Cooling fan relay or circuit Probably is the TPS out of range. To get the TPS back in range follow the FAQ to adjust the TPS. Then set the idle. When you modify the TPS, you change the base idle, which changes the base timing. When you adjust the base idle (with the idl...
- October 18th, 2014, 4:28 pm
- Forum: V6 Technical/Performance
- Topic: Help with CEL codes
- Replies: 6
- Views: 2665
Help with CEL codes
So I posted about 2 or 3 weeks ago about my cars rpm jumping and got a lot of responses and thought I had figured it out. I replaced the HEI mod and made sure it was securely grounded and my car ran fine...then it rained and it started jumping again and stalling. So I checked the O2 sensor thinking ...
- September 8th, 2014, 8:14 pm
- Forum: V6 Technical/Performance
- Topic: KLDE stalling after adding oil?
- Replies: 12
- Views: 3749
Re: KLDE stalling after adding oil?
Thanks for your help so far! As of right now I'm 90% sure its the distributor. I have on the 7 pronged KLZE distributor with the HEI setup. So not the modified probe disty. I have an older KLZE distributor which I also tried and got the same problems...So I'm thinking its either both distibutors are...
- September 7th, 2014, 9:22 pm
- Forum: V6 Technical/Performance
- Topic: KLDE stalling after adding oil?
- Replies: 12
- Views: 3749
Re: KLDE stalling after adding oil?
So I disconnected the fuel pump and connected a spark plug to the wires and tried it but I got no spark. Not really sure where I was supposed to put the spark plug while its in? but I was touching it to the frame and metal parts of the engine and there was no spark... Im about 90% sure its the distr...
- September 6th, 2014, 4:10 pm
- Forum: V6 Technical/Performance
- Topic: KLDE stalling after adding oil?
- Replies: 12
- Views: 3749
Re: KLDE stalling after adding oil?
The oild dipstick seems to be fine as far as I can tell. I put in 5w 30 which Im not 100% sure if that would be an issue. So far this is the process Ive gone through for trying to get it to work.Initially I though maybe it was the fuel injectors or water in my tank so I put in fuel injector cleaner ...
- September 4th, 2014, 9:33 pm
- Forum: V6 Technical/Performance
- Topic: KLDE stalling after adding oil?
- Replies: 12
- Views: 3749
Re: KLDE stalling after adding oil?
[quote="Daninski"]Sounds like you didn't put the oil cap back on.[/quote]
I wish it were that simple :/ i just checked and have looked over all the lines and wiring like 5 times...I dont know what else it could be and why when I changed my oil
I wish it were that simple :/ i just checked and have looked over all the lines and wiring like 5 times...I dont know what else it could be and why when I changed my oil
- September 4th, 2014, 4:06 pm
- Forum: V6 Technical/Performance
- Topic: KLDE stalling after adding oil?
- Replies: 12
- Views: 3749
KLDE stalling after adding oil?
So I have a 94 MX3 with a recent KLDE swap thats been running with minimal problems for about a month now. I checked the oil and saw it was at a little above the empty line so I added enough to bring it to just below the full line. After that the RPMs would jump all over and it started stalling, as ...
- July 7th, 2014, 8:29 pm
- Forum: V6 Technical/Performance
- Topic: KLDE transmission sensors
- Replies: 6
- Views: 1903
KLDE transmission sensors
So I recently did a KLDE swap to my GS. the only problem I have is figuring out where the transmission sensors plug up? I basically have everything working except my reverse lights and speedo...not sure if that would be the same sensor, but theres no where I can see on the MX3 harness to hook them u...
- May 1st, 2014, 5:31 pm
- Forum: MX-3 Related Items For Sale/Trade
- Topic: [FS] Lots of Parts from 2 v6 cars
- Replies: 12
- Views: 2683
Re: [FS] Lots of Parts from 2 v6 cars
Hey looking for reverse lights and speedometer sensors?
- June 30th, 2012, 2:56 am
- Forum: V6 Technical/Performance
- Topic: klde swap info
- Replies: 11
- Views: 621
Re: klde swap info
ok so i just finished the swap and ended up getting everything to run and it seems to be doing pretty good which i think ill be doing a write up for in the future once i get everything organized and put together however ive run into a little snag...the axles... i ended up using the probe transmissio...
- May 13th, 2012, 4:24 pm
- Forum: V6 Technical/Performance
- Topic: Timing belt tensioner?
- Replies: 4
- Views: 487
Timing belt tensioner?
I'm just about to swap a klde into my gs but wanted to do the timing belt ad water pump before I put it in since the engine is just about 90k miles. Would you suggest I do the timing belt tensioner too? Because there are 2 separate kits one with it and one without, which the one with it is like anot...
- May 13th, 2012, 4:10 pm
- Forum: V6 Technical/Performance
- Topic: Kl-de swap hints and tips please:)
- Replies: 12
- Views: 1283
Re: Kl-de swap hints and tips please:)
Quick question on the vacuum lines...how exactly do you hook them all up for the DE? I was under the impression you just left it all as is. I'm in the process of dropping the KLDE into my GS too and would love to not have to mess with vacuum lines with it in if I don't have to. Is there a write up s...
- April 23rd, 2012, 8:21 pm
- Forum: V6 Technical/Performance
- Topic: klde swap info
- Replies: 11
- Views: 621
Re: klde swap info
Awesome! Thanks for all the responses, although I'm happy I asked because there seems to be some speculation or at least different opinions on what I should use from either the mx3 or the probe. Here's what I have and if anyone could chime in and possibly give some pros/cons or advantages/disadvanta...
- April 20th, 2012, 12:41 pm
- Forum: V6 Technical/Performance
- Topic: klde swap info
- Replies: 11
- Views: 621
klde swap info
Ok, so I've been out of the mx3 game for almost 2 years. A bunch of financial and family problems have kept me from continuing. Anyways, I blew 2 klzes and am now putting a klde into the same car to try again. My question is what do I need to get it running? I have the whole probe gt ($400 with 90k ...
- March 8th, 2011, 8:35 pm
- Forum: MX-3 Related Items For Sale/Trade
- Topic: [FS] Lots of xtras (performance)! LIST
- Replies: 21
- Views: 1308
Re: [FS] Lots of xtras (performance)! LIST
Hey man! I'm still around :) sorry I left without any responses I had to move out to texas for a while to help take care of my sick grandmother but I'm back now and still do have everthing but considering doing a major overhaul instead of selling it all... Ill repost if I plan on seling it again sor...