[FS] 1993 MX-3 GS-DE for parts
[FS] 1993 MX-3 GS-DE for parts
Hey guys, I'm putting my 93 GS with KL-DE up for sale. Long story short, the car was in a front end collision, and has been sitting in my parents driveway for the past 4 months. The original plan was to part the car out, but I don't have the time or space at the moment, and they informed me that if the car isn't gone in the next few weeks it'll be scrapped.
The frame is bent in the front middle, it may or may not be repairable, I'm not an expert. The damage as far as I can tell is limited to the front bumper, head and parking lights, hood and the radiator. There are replacements for some of the damaged parts as I was planning an exterior overhaul as my next project. Included are a MS style front bumper, MS style side skirts, VSX rear bumper, and combat style side skirts. I also have a set of like new projector headlight, 2 pairs of regular headlights, an extra pair of factory tail lights (black altezza style on the car now), an invader style cf hood that wasn't in the crash, but needs some work and probably would be best painted. Most of the spare parts are a little beat up as they've been in my parents garage for quite a while, but most if not all are usable. Paint on the car is rough, it's original black, but fading in some spots, little if any rust.
Mechanically the car was in great shape at the time of the crash. The swapped DE ran beautifully and the 08 si coupe I bought is seriously lacking in torque compared to the DE. It was swapped when I bought the car, but I pulled the valve covers off a while back to paint them, and it looked like a brand new engine. Modifications ive done are pheno spacers, custom intake with k&n filter, headers, custom header back exhaust, short shifter, slim visors and lots more im sure im forgetting. The car is lowered on h&r springs with zx2 struts with se wheels from my old SE. i also swapped the SE interior minus the steering wheel. The interior is in decent shape minus the drivers seat which has a bunch of rips and tears from so much use.
I don't want to scrap this car and see all my work and parts go to waste so someone please take this car off my hands. I'm asking $1500 but I'll entertain any reasonable offer. I'm sure I'm forgetting a lot of details, so feel free to PM me with any questions. ive only got this one pic on my phone, but I'll gladly take more.
The frame is bent in the front middle, it may or may not be repairable, I'm not an expert. The damage as far as I can tell is limited to the front bumper, head and parking lights, hood and the radiator. There are replacements for some of the damaged parts as I was planning an exterior overhaul as my next project. Included are a MS style front bumper, MS style side skirts, VSX rear bumper, and combat style side skirts. I also have a set of like new projector headlight, 2 pairs of regular headlights, an extra pair of factory tail lights (black altezza style on the car now), an invader style cf hood that wasn't in the crash, but needs some work and probably would be best painted. Most of the spare parts are a little beat up as they've been in my parents garage for quite a while, but most if not all are usable. Paint on the car is rough, it's original black, but fading in some spots, little if any rust.
Mechanically the car was in great shape at the time of the crash. The swapped DE ran beautifully and the 08 si coupe I bought is seriously lacking in torque compared to the DE. It was swapped when I bought the car, but I pulled the valve covers off a while back to paint them, and it looked like a brand new engine. Modifications ive done are pheno spacers, custom intake with k&n filter, headers, custom header back exhaust, short shifter, slim visors and lots more im sure im forgetting. The car is lowered on h&r springs with zx2 struts with se wheels from my old SE. i also swapped the SE interior minus the steering wheel. The interior is in decent shape minus the drivers seat which has a bunch of rips and tears from so much use.
I don't want to scrap this car and see all my work and parts go to waste so someone please take this car off my hands. I'm asking $1500 but I'll entertain any reasonable offer. I'm sure I'm forgetting a lot of details, so feel free to PM me with any questions. ive only got this one pic on my phone, but I'll gladly take more.
Matt Domenick
1993 GS-ZE
1993 GS-ZE
- kulluminati777
- Senior Member
- Posts: 2509
- Joined: July 11th, 2010, 11:10 am
- antispam: ~SPAM*SUX~
- Location: Sunny California
- Contact:
Re: [FS] 1993 MX-3 GS-DE for parts
If your parting out i would take a few parts, are those valve covers powder coated or painted?
Re: [FS] 1993 MX-3 GS-DE for parts
Valve covers and brake calipers are painted high heat gold, and the intake manifold is painted "aluminum"....the combo looks awesome in person. I also forgot to add I have a pakfeifer spoiler too. I'd rather sell it all as a whole but pm me what you're interested in and I'll let you know.
Matt Domenick
1993 GS-ZE
1993 GS-ZE
- diezzel
- Regular Member
- Posts: 391
- Joined: April 19th, 2010, 1:12 am
- antispam: ~SPAM*SUX~
- Location: Edmonton,Alberta
Re: [FS] 1993 MX-3 GS-DE for parts
Pm sent .
Re: [FS] 1993 MX-3 GS-DE for parts
I would like the strut bar... would you give me the strut bar? What if I said pretty please?
- fowljesse
- Supporting Member
- Posts: 5676
- Joined: March 17th, 2006, 2:59 pm
- Location: portland, OR
- Contact:
Re: [FS] 1993 MX-3 GS-DE for parts
That looks like a lot less damage than my car had, and I got it going again. I encourage you to fix it, but if you don't I think that whomever buys it will be able to fix it relatively easily. If I lived near you, I would buy it.
'93 GS - P&P DE w/ ZE exh. cams/ pistns, KLG4 IM, 65mm TB, MSnS, Phenos, K&N RAI, UDP, Grnd wires, rear batt, filld MM, torq strt, TWM short shftr, Exedy, Lng tube hdrs 2.5" Side exhaust, H&R sprngs, Poly bushngs, strutbars, Alum. crss mmber&tiebar, 22mm swybar, solid links, Direzzas, leather int, Alpine 9805 stereo & alrm, keyless entry, 10 Boston Accoustics spkrs, Prjectrs, Blaster2, CF hood, FG hatch, Lexan
Re: [FS] 1993 MX-3 GS-DE for parts
How much are you asking for the cold air intake shipped to Ontario?
92 Mx3 GS KLZE 5 speed
97 Dodge Dakota - Boyd rims, custom built 5.9 360, custom tranny with kevlar guts and shift kit. Too many upgrades to list.
92 Mazda 323 - winter beater
mx3 by Leadfoot Lesley, on Flickr
97 Dodge Dakota - Boyd rims, custom built 5.9 360, custom tranny with kevlar guts and shift kit. Too many upgrades to list.
92 Mazda 323 - winter beater
mx3 by Leadfoot Lesley, on Flickr
-
- Regular Member
- Posts: 423
- Joined: September 26th, 2011, 6:30 am
- antispam: ~SPAM*SUX~
- Location: USA,PA
Re: [FS] 1993 MX-3 GS-DE for parts
if you decied to part it out im interesed in the motor and im only in PA
- SgtLynch
- Regular Member
- Posts: 110
- Joined: September 27th, 2010, 2:43 pm
- antispam: ~SPAM*SUX~
- Location: Markham Ontario
Re: [FS] 1993 MX-3 GS-DE for parts
Pic is Broke.
- Evo_Spec
- Senior Member
- Posts: 2504
- Joined: December 30th, 2008, 3:41 am
- Location: Calgary, Alberta, Canada
Re: [FS] 1993 MX-3 GS-DE for parts
works for meSgtLynch wrote:Pic is Broke.
Re: [FS] 1993 MX-3 GS-DE for parts
PM'd
Steve Seiter
Blue '92 GS, Milly square-port DE with stainless headers, Stoker100 chip, HEI/Blaster conversion,
2.25" exhaust, High flow cat, ZX-2 shocks, short shifter, urethane front bushings, 17x7s with 595 Evos
Blue '92 GS, Milly square-port DE with stainless headers, Stoker100 chip, HEI/Blaster conversion,
2.25" exhaust, High flow cat, ZX-2 shocks, short shifter, urethane front bushings, 17x7s with 595 Evos
- WhiteFinish
- Regular Member
- Posts: 1635
- Joined: April 3rd, 2006, 9:48 am
- Location: Netherlands
- Contact:
Re: [FS] 1993 MX-3 GS-DE for parts
I want the front strutbar too !!!
Re: [FS] 1993 MX-3 GS-DE for parts
Get.In.Line.
I think this guy disappeared.
I think this guy disappeared.