HVAC Indiglo panel look
-
- Forum Moderator
- Posts: 3415
- Joined: September 3rd, 2002, 2:01 am
- Location: Eastern Hemisphere
- Contact:
HVAC Indiglo panel look
ok guys its come down to this, because of people wanting a custom look (backgrounds, fonts different glowing colors and logos) we are going to have to comprimise
1. 3color original design
<img src="http://www.digitalviscous.com/albums/us ... ate-v2.jpg" alt=" - " />
If we get this design there is no customization allowed it will look how it does now you cant have custom fonts or anything it will look exactly how it does right now.
2. <img src="http://www.digitalviscous.com/albums/us ... 3hvac3.jpg" alt=" - " />
Now if we go with single color (what ever color they can use or you want) we can have different color backgrounds different fonts different symbols and logos its basically you can design it exactly how you want it to look so you can have your custom look.
Now for the 9 people who have paid i request you post your votes and not use the polls because since you are the original people to support the gb your votes count double.
AND DO NOT VOTE IF YOUR NOT PURCHASING, IF YOUR NOT GETTING THESE UNITS I DONT CARE WHAT YOUR OPINION IS AND NEITHER DO THE PEOPLE THAT ARE BUYING.
1. 3color original design
<img src="http://www.digitalviscous.com/albums/us ... ate-v2.jpg" alt=" - " />
If we get this design there is no customization allowed it will look how it does now you cant have custom fonts or anything it will look exactly how it does right now.
2. <img src="http://www.digitalviscous.com/albums/us ... 3hvac3.jpg" alt=" - " />
Now if we go with single color (what ever color they can use or you want) we can have different color backgrounds different fonts different symbols and logos its basically you can design it exactly how you want it to look so you can have your custom look.
Now for the 9 people who have paid i request you post your votes and not use the polls because since you are the original people to support the gb your votes count double.
AND DO NOT VOTE IF YOUR NOT PURCHASING, IF YOUR NOT GETTING THESE UNITS I DONT CARE WHAT YOUR OPINION IS AND NEITHER DO THE PEOPLE THAT ARE BUYING.
08 Infiniti G37s 6speed (The Daily)
Stillen Cold Air Intake, Z1 Plenum Power Mod, Z1 Headers, Z1 Test Pipe, OBX (Ark) Exhaust, Up-Rev Osiris Engine Management (Tuned at Z1), 20x9" 20x10" Str Racing Concave Staggered Rims, SPC Camber kit, Tein H Techs Springs
01 Lexus Is300 (LS2 Project)
93 Mx3 SE 2.5 KLZE (sold it)
93 Mx3 GS 2.0 KFZE (killed it)
Stillen Cold Air Intake, Z1 Plenum Power Mod, Z1 Headers, Z1 Test Pipe, OBX (Ark) Exhaust, Up-Rev Osiris Engine Management (Tuned at Z1), 20x9" 20x10" Str Racing Concave Staggered Rims, SPC Camber kit, Tein H Techs Springs
01 Lexus Is300 (LS2 Project)
93 Mx3 SE 2.5 KLZE (sold it)
93 Mx3 GS 2.0 KFZE (killed it)
-
- Regular Member
- Posts: 329
- Joined: March 25th, 2003, 2:01 am
- Location: Lynchburg, VA
- Contact:
Re: HVAC Indiglo panel look
i think it'd look better with the 3 colors then it could with only one color, no matter what color, font, etc. for those who want a one off design, you're getting something pretty close. this is the first time anyone has done something like this that i know of and we'll be the first ones to have it, can't beat those bragging rights. another plus to the 3 color is that it'll match most of the indiglo gauge faces better than a singl color would. anyways, that's my vote/opinion.
-
- Senior Member
- Posts: 3391
- Joined: November 30th, 2001, 2:01 am
- Location: Stuttgart, Deutschland
- Contact:
Re: HVAC Indiglo panel look
definitely style 1
Noble Green Metallic 93' GS Hybrid, 91' 1.8 323
DONATE TO MX-3.COM
DONATE TO MX-3.COM
- babyblueMX3
- Supporting Member
- Posts: 3755
- Joined: February 23rd, 2003, 2:01 am
- Location: Gatineau,Quebec,Canada
- Contact:
Re: HVAC Indiglo panel look
I'm so in for #2..3 colours would look too stock..and the blue matches perfectly the interior of my car
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
Current car : Golf 01 GTI 1.8T (15 psi)
-
- Regular Member
- Posts: 310
- Joined: February 14th, 2003, 2:01 am
- Location: berwick .maine
Re: HVAC Indiglo panel look
my vote is for #1
-
- Senior Member
- Posts: 2030
- Joined: February 3rd, 2002, 2:01 am
- Location: Toronto, Ontario, Canada
- Contact:
Re: HVAC Indiglo panel look
All the graphic designer guys out there, please provide some new and modern fonts. This font is used everywhere and is too outdated.
If lookes the best in 3 colors, but one other suggestion i had was, lets come up with a new trim for the direction symbols (windshield, feet, etc.) this ecliptic shape looks too old.
So now that we are in the designing part of this project, lets build the kewlest looking one out there.![2 Thumbs Up :2thumbsup:](./images/smilies/2thumbsup.gif)
![Shrug :shrug:](./images/smilies/shrug.gif)
If lookes the best in 3 colors, but one other suggestion i had was, lets come up with a new trim for the direction symbols (windshield, feet, etc.) this ecliptic shape looks too old.
So now that we are in the designing part of this project, lets build the kewlest looking one out there.
![2 Thumbs Up :2thumbsup:](./images/smilies/2thumbsup.gif)
![Image](http://www.sikbluemx3.com/sigs_4.jpg)
- Sam Baker
- Regular Member
- Posts: 1461
- Joined: May 23rd, 2003, 2:01 am
- Location: Wellington, New Zealand
Re: HVAC Indiglo panel look
![Bow Down :bowdown:](./images/smilies/bowdown.gif)
is the face white like the gauges are? or black? imo black would look better, with the blue glow instead of green at night.. just curious. thanx
~ sam
92 Autozam AZ3
Re: HVAC Indiglo panel look
I'm in for style #1, BUT...
Now that I think about it, the white face might look a little wierd - even if it does match my gauges. Plus I've got silver painted dash trim. Gotta color-coordinate you know.
But then again, it may look fine once it's on there. I also agree with Kav that the fonts are old-looking. It'd be so cool if we could get updated fonts and maybe some newer style symbols. Might be asking too much from SpeedHut, but if we're going to do this and be the benchmark, we may as well do it right.
Now that I think about it, the white face might look a little wierd - even if it does match my gauges. Plus I've got silver painted dash trim. Gotta color-coordinate you know.
![Wink ;)](./images/smilies/icon_wink.gif)
But then again, it may look fine once it's on there. I also agree with Kav that the fonts are old-looking. It'd be so cool if we could get updated fonts and maybe some newer style symbols. Might be asking too much from SpeedHut, but if we're going to do this and be the benchmark, we may as well do it right.
Hank
'92 MX-3 ZE *SOLD*
'05 RX-8 Touring
--All those who wander are not lost-- JRR Tolkien
'92 MX-3 ZE *SOLD*
'05 RX-8 Touring
--All those who wander are not lost-- JRR Tolkien
-
- Forum Moderator
- Posts: 3415
- Joined: September 3rd, 2002, 2:01 am
- Location: Eastern Hemisphere
- Contact:
Re: HVAC Indiglo panel look
No it will look however we design it but take note it has to voted on and approved by speedhut as well as us, and the reason i chose Eurostyle is its the best looking font in the San Serif Catagory, Something organic or wild would just look in my own opinion ugly so im up to a font change just make sure you go with something proffesional and clean and not wild and crazy looking, also i do have the official mazda font we could use
08 Infiniti G37s 6speed (The Daily)
Stillen Cold Air Intake, Z1 Plenum Power Mod, Z1 Headers, Z1 Test Pipe, OBX (Ark) Exhaust, Up-Rev Osiris Engine Management (Tuned at Z1), 20x9" 20x10" Str Racing Concave Staggered Rims, SPC Camber kit, Tein H Techs Springs
01 Lexus Is300 (LS2 Project)
93 Mx3 SE 2.5 KLZE (sold it)
93 Mx3 GS 2.0 KFZE (killed it)
Stillen Cold Air Intake, Z1 Plenum Power Mod, Z1 Headers, Z1 Test Pipe, OBX (Ark) Exhaust, Up-Rev Osiris Engine Management (Tuned at Z1), 20x9" 20x10" Str Racing Concave Staggered Rims, SPC Camber kit, Tein H Techs Springs
01 Lexus Is300 (LS2 Project)
93 Mx3 SE 2.5 KLZE (sold it)
93 Mx3 GS 2.0 KFZE (killed it)
-
- Forum Moderator
- Posts: 3415
- Joined: September 3rd, 2002, 2:01 am
- Location: Eastern Hemisphere
- Contact:
Re: HVAC Indiglo panel look
oh and another thing there are over 30 different versions of the euro style type fonts and i have about 22 of them he he he
08 Infiniti G37s 6speed (The Daily)
Stillen Cold Air Intake, Z1 Plenum Power Mod, Z1 Headers, Z1 Test Pipe, OBX (Ark) Exhaust, Up-Rev Osiris Engine Management (Tuned at Z1), 20x9" 20x10" Str Racing Concave Staggered Rims, SPC Camber kit, Tein H Techs Springs
01 Lexus Is300 (LS2 Project)
93 Mx3 SE 2.5 KLZE (sold it)
93 Mx3 GS 2.0 KFZE (killed it)
Stillen Cold Air Intake, Z1 Plenum Power Mod, Z1 Headers, Z1 Test Pipe, OBX (Ark) Exhaust, Up-Rev Osiris Engine Management (Tuned at Z1), 20x9" 20x10" Str Racing Concave Staggered Rims, SPC Camber kit, Tein H Techs Springs
01 Lexus Is300 (LS2 Project)
93 Mx3 SE 2.5 KLZE (sold it)
93 Mx3 GS 2.0 KFZE (killed it)
Re: HVAC Indiglo panel look
I say #1, you need the hot and cold.
-
- Senior Member
- Posts: 3391
- Joined: November 30th, 2001, 2:01 am
- Location: Stuttgart, Deutschland
- Contact:
Re: HVAC Indiglo panel look
I don't see why we'd need a font change. There isn't much room to fit the OFF 1 2 3 4 in there anyways, so using some crazy font isn't going to fit. And IMO any kind of cursive font is going to look so hideous that you can consider me out of this GB alltogether.
as for the symbols..that'd be cool if we could find some good pictures from maybe some other makes/models. Nothing too complex, just some cool symbols.
as for the symbols..that'd be cool if we could find some good pictures from maybe some other makes/models. Nothing too complex, just some cool symbols.
Noble Green Metallic 93' GS Hybrid, 91' 1.8 323
DONATE TO MX-3.COM
DONATE TO MX-3.COM
- papa roached
- Senior Member
- Posts: 2761
- Joined: December 10th, 2002, 2:01 am
- Location: Montgomery, WVa
Re: HVAC Indiglo panel look
#1
93 MX-3 GS (collecting parts for Eunos Presso conversion), 94 626 Transmission (4.10 gears), KL31 camed KL-ZE, Millenia intake, Millenia TB, SSAutochrome V2 headers, Magnaflow cat, 2 1/4 in pipe, Top Speed Pro 1 muffler, 9lb Fidanza Flywheel, ACT clutch, Corksport SS clutch line, Corksport SS brake lines, Unorthadox UDP, 255 lph fuel pump, HEI mod, ghetto-charger intake, KL36 ECU, SRD transverse crossmember bushings, SRD shifter extention bushing, SRD crossmember, Corksport bronzoil shifter bushings, Brembo Crossdrilled and Slotted rotors, 15 inch Konig Heliums, ZX-2 S/R struts, Eibach lowering springs, OEM front strut bar, Ebay rear strut bar, BFGoodrich G-Force T/A KDWs
Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
- Nd4SpdSe
- Senior Member
- Posts: 11212
- Joined: May 25th, 2002, 2:01 am
- Location: Québec City, Quebec, Canada
- Contact:
Re: HVAC Indiglo panel look
#1
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
Re: HVAC Indiglo panel look
I'm in for number one, a few things I"d like see, if possible.
1. Font is the same as most indiglo gauges people seem to have
2. The color is the same blue in the day time as the aforementioned gauges.
<small>[ October 10, 2003, 10:49 AM: Message edited by: jplar ]</small>
1. Font is the same as most indiglo gauges people seem to have
2. The color is the same blue in the day time as the aforementioned gauges.
<small>[ October 10, 2003, 10:49 AM: Message edited by: jplar ]</small>