![Very Happy :D](./images/smilies/icon_biggrin.gif)
custom aluminum intake mani ,1/2" ID fuel rail, flu
-
- Regular Member
- Posts: 758
- Joined: January 10th, 2001, 2:01 am
- Location: auburn, ny
- Contact:
custom aluminum intake mani ,1/2" ID fuel rail, flu
like it says. custom equal length aluminum intake manifold. fluted runners inside main plenum. fitted with a mustang throttle body, or can adapt yours to it. comes with very high flow fuel rail, 720cc injectors, aeromotive boost dependant adjustable fpr. also available is 20 ft of stainless braided line all 8an fittings and a huge paxton external fuel pump good for up to 750hp fi. also has bungs welded in for a direct port nitrous system. comes with all jets, bottle , line, equal flow distribution blocks and hard lines. did i mention that it is fully polished and looks like chrome? also flows more than a toilet.. lol. seriously this manifold was ported for flow as well as equilibrium.. everything done RIGHT, no expense spared..pics upon request. serious offers only. anyone interested in this should have an idea what its worth. for the serious racer ![Very Happy :D](./images/smilies/icon_biggrin.gif)
![Very Happy :D](./images/smilies/icon_biggrin.gif)
DRAG SPEC MX3 BEING PARTED OUT.
BUY ALL MY STUFF OR DIE.lol, SERIOUSLY BUY MY STUFF. PLEEEASE
BUY ALL MY STUFF OR DIE.lol, SERIOUSLY BUY MY STUFF. PLEEEASE
-
- Regular Member
- Posts: 758
- Joined: January 10th, 2001, 2:01 am
- Location: auburn, ny
- Contact:
Re: custom aluminum intake mani ,1/2" ID fuel rail, flu
ttt
DRAG SPEC MX3 BEING PARTED OUT.
BUY ALL MY STUFF OR DIE.lol, SERIOUSLY BUY MY STUFF. PLEEEASE
BUY ALL MY STUFF OR DIE.lol, SERIOUSLY BUY MY STUFF. PLEEEASE
Re: custom aluminum intake mani ,1/2" ID fuel rail, flu
I dont have an idea of what its worth but I do want it is it for the 4 or 6 cylinder and what will you take for it
93 KLZED Mx-3 with MSD ignition, LSD tranny, clutchmasters stage 3 clutch, short throw shifter, underdrive pulleys, Nology plug wires, header with open 2.5" exhaust and ractive muffler, and of course 125 shot Zex system with bottle heater electric bottle opener and purge valve, all autometer carbon fiber gauges, (Dash is completely custom in the gauge cluseter area), alpine deck with 6 disc changer, orion 32 band digital eq, 5 Linear power amplifiers, 2 alpine digital crossovers, 1 JL w5 12" woofer fiberglassed into the spare tire hole, q-form kick panels with 5 1/4 and tweeters, fiberglassed door panels and rear panels, alpine security system, also ground control coilovers, 17" Konig wheels with nitto tires, ractive rear strut tower brace, cross drilled and slotted roters on all 4 corners, GTR rear spoiler, 2 Sets of neons, and clear bumper and corner lights. I cant take credit for building this car it belonged to another mx-3er who built the whole thing and if you would like to see it being built go to Woodyscustomcreations.com
1/4 mile times 13.46 at 103
1/4 mile times 13.46 at 103
-
- Regular Member
- Posts: 603
- Joined: August 19th, 2002, 2:01 am
- Location: Guelph Ontario Canada
Re: custom aluminum intake mani ,1/2" ID fuel rail, flu
will you separate the injector , if so how much?
13.023 @ 105 mph
-
- Junior Member
- Posts: 21
- Joined: December 11th, 2002, 2:01 am
- Location: Stouffville, Ontario (http://www.TurboMiata.net)
- Contact:
Re: custom aluminum intake mani ,1/2" ID fuel rail, flu
Pics? Is this Dave's old setup?Originally posted by boostedmx:
like it says. custom equal length aluminum intake manifold. fluted runners inside main plenum. fitted with a mustang throttle body, or can adapt yours to it. comes with very high flow fuel rail, 720cc injectors, aeromotive boost dependant adjustable fpr. also available is 20 ft of stainless braided line all 8an fittings and a huge paxton external fuel pump good for up to 750hp fi. also has bungs welded in for a direct port nitrous system. comes with all jets, bottle , line, equal flow distribution blocks and hard lines. did i mention that it is fully polished and looks like chrome? also flows more than a toilet.. lol. seriously this manifold was ported for flow as well as equilibrium.. everything done RIGHT, no expense spared..pics upon request. serious offers only. anyone interested in this should have an idea what its worth. for the serious racer![]()
_ ______________ _
Later, Marc
Later, Marc
Re: custom aluminum intake mani ,1/2" ID fuel rail, flu
i don't think so dave ran a bp this is for a b6Originally posted by turbomiata:
Pics? Is this Dave's old setup?Originally posted by boostedmx:
like it says. custom equal length aluminum intake manifold. fluted runners inside main plenum. fitted with a mustang throttle body, or can adapt yours to it. comes with very high flow fuel rail, 720cc injectors, aeromotive boost dependant adjustable fpr. also available is 20 ft of stainless braided line all 8an fittings and a huge paxton external fuel pump good for up to 750hp fi. also has bungs welded in for a direct port nitrous system. comes with all jets, bottle , line, equal flow distribution blocks and hard lines. did i mention that it is fully polished and looks like chrome? also flows more than a toilet.. lol. seriously this manifold was ported for flow as well as equilibrium.. everything done RIGHT, no expense spared..pics upon request. serious offers only. anyone interested in this should have an idea what its worth. for the serious racer![]()
![Shrug :shrug:](./images/smilies/shrug.gif)
1993 MX-3 GS V6 - Stock
2004 MazdaSpeed MX-5
2004 RX-8 - Project
2004 MazdaSpeed MX-5
2004 RX-8 - Project
-
- Regular Member
- Posts: 758
- Joined: January 10th, 2001, 2:01 am
- Location: auburn, ny
- Contact:
Re: custom aluminum intake mani ,1/2" ID fuel rail, flu
no, not daves setup but almost exact same but for the b6, im not sure if they interchange, but i dont think they do
DRAG SPEC MX3 BEING PARTED OUT.
BUY ALL MY STUFF OR DIE.lol, SERIOUSLY BUY MY STUFF. PLEEEASE
BUY ALL MY STUFF OR DIE.lol, SERIOUSLY BUY MY STUFF. PLEEEASE
-
- Regular Member
- Posts: 758
- Joined: January 10th, 2001, 2:01 am
- Location: auburn, ny
- Contact:
Re: custom aluminum intake mani ,1/2" ID fuel rail, flu
bump... any reasonable offer accepted
DRAG SPEC MX3 BEING PARTED OUT.
BUY ALL MY STUFF OR DIE.lol, SERIOUSLY BUY MY STUFF. PLEEEASE
BUY ALL MY STUFF OR DIE.lol, SERIOUSLY BUY MY STUFF. PLEEEASE
-
- Regular Member
- Posts: 758
- Joined: January 10th, 2001, 2:01 am
- Location: auburn, ny
- Contact:
Re: custom aluminum intake mani ,1/2" ID fuel rail, flu
ttt
DRAG SPEC MX3 BEING PARTED OUT.
BUY ALL MY STUFF OR DIE.lol, SERIOUSLY BUY MY STUFF. PLEEEASE
BUY ALL MY STUFF OR DIE.lol, SERIOUSLY BUY MY STUFF. PLEEEASE
-
- Regular Member
- Posts: 603
- Joined: August 19th, 2002, 2:01 am
- Location: Guelph Ontario Canada
Re: custom aluminum intake mani ,1/2" ID fuel rail, flu
OMG, 720cc injectors?? I don't know if I'll need anything that crazy, I don't even think I'll need the fuel rail either. I am getting one made for my b6t. If you can provide pics of this product and send them to my email here at: lostboys00@juno.com I will make a reasonable offer for this.
-Mark Lathrop
1992 MX-3 RS-T
B6T with some goodies
"...I told those fudgepackers I liked Michael Bolton's music..."
1992 MX-3 RS-T
B6T with some goodies
"...I told those fudgepackers I liked Michael Bolton's music..."
Re: custom aluminum intake mani ,1/2" ID fuel rail, flu
boosted--- can i get pics
MXtr3me@aol.com
MXtr3me@aol.com
Matt
94 Corvette Torch Red RS---SOLD![Sad :(](./images/smilies/icon_sad.gif)
http://www.cardomain.com/member_pages/view_page.pl?page_id=307456
94 Corvette Torch Red RS---SOLD
![Sad :(](./images/smilies/icon_sad.gif)
http://www.cardomain.com/member_pages/view_page.pl?page_id=307456