Finally an intake for the i4's
-
- Regular Member
- Posts: 90
- Joined: January 6th, 2004, 2:01 am
- Location: Brookville, Indiana, U.S.
Re: Finally an intake for the i4's
Heres a link to the pics I have of the intake, I know they look horrible but I was in a hurry
Peace
Intake Pictures
Peace
Intake Pictures
Re: Finally an intake for the i4's
Nice pics . . . where precisely is the filter located, just inside the driver side part of the bumper? Looks sweet!
Now if I can JUST find one for the DOHC . . .
Now if I can JUST find one for the DOHC . . .
Brand Newbian . . .
1994 Black RS Precidia
Stock as PHUCK . . .
1994 Black RS Precidia
Stock as PHUCK . . .
-
- Regular Member
- Posts: 90
- Joined: January 6th, 2004, 2:01 am
- Location: Brookville, Indiana, U.S.
Re: Finally an intake for the i4's
Yeah the filter is located in between the fender and sub-frame. I guess its called a sub-frame.
NE-Ways its in that little cubby hole under the radiator overflow resivior
NE-Ways its in that little cubby hole under the radiator overflow resivior
Re: Finally an intake for the i4's
intake looks nice any difference in per formance or gas mileage looks good though i probably are going to purchase one soon.
- monty73741
- Forum Moderator
- Posts: 2651
- Joined: February 11th, 2001, 2:01 am
- Location: baltimore,md usa
- Contact:
Re: Finally an intake for the i4's
it should fit the dohc.....i installin the same one...but probally gonna put on my prm instead of the cone filter
[/QB][/QUOTE]
[/QB][/QUOTE]
Jason Danaher
Please Help Support MX-3.com
MX-3.com Online Store - http://www.mx-3.com/osv3
CafePress - http://www.cafepress.com/mx3com
Please Help Support MX-3.com
MX-3.com Online Store - http://www.mx-3.com/osv3
CafePress - http://www.cafepress.com/mx3com
-
- Regular Member
- Posts: 90
- Joined: January 6th, 2004, 2:01 am
- Location: Brookville, Indiana, U.S.
Re: Finally an intake for the i4's
Gas mialage i don't know about yet because I just installed yesterday, But as for performance it seems to be a lot smother through the RPM's and has more pick up
-
- Regular Member
- Posts: 535
- Joined: December 11th, 2003, 2:01 am
- Location: Middletown PA
Re: Finally an intake for the i4's
does this work on 91 - 92? or is there a complete difference? I want a complete bolt-up CAI, does this one add MPG? maybe that whoop said too?
http://www.cardomain.com/ride/2385931/4
Car Name - Elsie (LC)
Car Type - 92 Black RS Stock 190k
Car Name - (yet to be decided)
Car Type - 93 (soon Black) GS KLZE 130k
Car Name - Elsie (LC)
Car Type - 92 Black RS Stock 190k
Car Name - (yet to be decided)
Car Type - 93 (soon Black) GS KLZE 130k
- MX3-Freak
- Regular Member
- Posts: 955
- Joined: November 8th, 2003, 2:01 am
- Location: Gig Harbor Washington
- Contact:
Re: Finally an intake for the i4's
It is meant to work on the SOHC, not the DOHC. You should have absolutely no modification on a 92 (which is SOHC). But why would you spend $70 on a system that you can make for $20 - $30 that is just as effective? Making it yourself isnt hard...get some pipe and piece it together. A 30 minute job if you know what you're doing. But hey, each to their own.
Stock 1995 RS - Creek Blue
Car Meanins:
Honda: Hang On, Not Done Accelerating
FORD: Frequently Overhauled, Rarely Driven
Mazda: Must Always Zoom Down Asphalt
Car Meanins:
Honda: Hang On, Not Done Accelerating
FORD: Frequently Overhauled, Rarely Driven
Mazda: Must Always Zoom Down Asphalt
-
- Regular Member
- Posts: 535
- Joined: December 11th, 2003, 2:01 am
- Location: Middletown PA
Re: Finally an intake for the i4's
heh thats the thing, I don't know what I'm doing when it comes to my engine, I know the basics of car maintenence but for performance I'm a retard, I can handle everything else about a car execpt the engine, a to z except e, so actually I'm probably going to need help to put THIS one on after I spend $70 for it, unless one of you guys wants to make one for a 92 SOHC and I'll send you $50 heh
http://www.cardomain.com/ride/2385931/4
Car Name - Elsie (LC)
Car Type - 92 Black RS Stock 190k
Car Name - (yet to be decided)
Car Type - 93 (soon Black) GS KLZE 130k
Car Name - Elsie (LC)
Car Type - 92 Black RS Stock 190k
Car Name - (yet to be decided)
Car Type - 93 (soon Black) GS KLZE 130k
- MX3-Freak
- Regular Member
- Posts: 955
- Joined: November 8th, 2003, 2:01 am
- Location: Gig Harbor Washington
- Contact:
Re: Finally an intake for the i4's
Damn, wish I had an SOHC to make one off of, then I would take up that offer.
Stock 1995 RS - Creek Blue
Car Meanins:
Honda: Hang On, Not Done Accelerating
FORD: Frequently Overhauled, Rarely Driven
Mazda: Must Always Zoom Down Asphalt
Car Meanins:
Honda: Hang On, Not Done Accelerating
FORD: Frequently Overhauled, Rarely Driven
Mazda: Must Always Zoom Down Asphalt
-
- Regular Member
- Posts: 339
- Joined: January 9th, 2004, 2:01 am
- Location: Philly
- Contact:
Re: Finally an intake for the i4's
does this fit dohc?
www.illegalCustoms.com
Tri-State Area Car Club
Tri-State Area Car Club
- MX3-Freak
- Regular Member
- Posts: 955
- Joined: November 8th, 2003, 2:01 am
- Location: Gig Harbor Washington
- Contact:
Re: Finally an intake for the i4's
Yes - with slight modification.
Stock 1995 RS - Creek Blue
Car Meanins:
Honda: Hang On, Not Done Accelerating
FORD: Frequently Overhauled, Rarely Driven
Mazda: Must Always Zoom Down Asphalt
Car Meanins:
Honda: Hang On, Not Done Accelerating
FORD: Frequently Overhauled, Rarely Driven
Mazda: Must Always Zoom Down Asphalt
-
- Regular Member
- Posts: 50
- Joined: September 18th, 2003, 2:01 am
- Location: Dallas, TX
Re: Finally an intake for the i4's
Gah! What need to be modified... and how so?
(DOHC), I have looked EVERYWHERE for a DOHC air intake system.. and found nothing... I don't really have a whole lot of tools at my disposal.. so im pretty limited on how i can modify it... unless you can do it with some tin sheers :p
-Chris
(DOHC), I have looked EVERYWHERE for a DOHC air intake system.. and found nothing... I don't really have a whole lot of tools at my disposal.. so im pretty limited on how i can modify it... unless you can do it with some tin sheers :p
-Chris
- MX3-Freak
- Regular Member
- Posts: 955
- Joined: November 8th, 2003, 2:01 am
- Location: Gig Harbor Washington
- Contact:
Re: Finally an intake for the i4's
I believe the only modification will be at the maf. Since the SOHC MAF was square rather then round, they use an adapter plate. You could probibly just not use this part, and it would fit. However, I could be mistaken because I made my own rather then buy this one.
Stock 1995 RS - Creek Blue
Car Meanins:
Honda: Hang On, Not Done Accelerating
FORD: Frequently Overhauled, Rarely Driven
Mazda: Must Always Zoom Down Asphalt
Car Meanins:
Honda: Hang On, Not Done Accelerating
FORD: Frequently Overhauled, Rarely Driven
Mazda: Must Always Zoom Down Asphalt
Re: Finally an intake for the i4's
Yes, it will work on DOHC!!!! I bought one, installed on my 94. The Adaptor plate is not needed. The only mod I made was at the throttle body. I cut about 1 inch of the old rubber intake (it was badly cracked inside the ribbed area, hence the upgrade) for a little room by the battery. When I hooked it up the metal tube rubbed my battery, so I allowed some room. Took about an hour and a half. I could do another in 30 mins.
If not broke - don't fix, modify. If broke - fix it right, and make it better.