RX-7 MAF

papa roached · Post by **papa roached** » February 10th, 2003, 1:43 am

how much of performance difference will i see if i get a 88-89 RX-7 MAF and put it on my 92 1.6 SOHC?

dropitlikeitshot · February 10th, 2003, 9:52 am

So far from what i read the rx7 maf helps the car to get air better.. adds 1-3 hp. Also its real good idea to get one if u r going to turbocharge your car..Thats about all i read..

Marlon · Post by **Marlon** » February 10th, 2003, 2:30 pm

on proteges with a bp they get 6 hp so i would guess 2 or 3 but at high rpm

Ruben MX-3 · Post by **Ruben MX-3** » March 21st, 2003, 10:48 pm

sorry guys...hehe wuts MAF?

mitmaks · Post by **mitmaks** » March 21st, 2003, 11:12 pm

will it fit only on rs or on gs too?

type R freak · Post by **type R freak** » March 21st, 2003, 11:46 pm

Here's one on ebay I saw, starting bid is $9.99.Looks just like our stock ones...

ProtegeSTS · Post by **ProtegeSTS** » March 22nd, 2003, 10:42 am

It won't do you a bit of good. The 1.6 doesnt breathe enough to take advantage of it.

The_Great_Tonge · Post by **The_Great_Tonge** » March 22nd, 2003, 3:01 pm

well has anyone swap that maf for theres on a RS? if so did you feel any gains? is it worth it? because some say it does work and some say it doesnt. so if someone who has done it could speak up it would be nice, thanks!

mitmaks · Post by **mitmaks** » March 22nd, 2003, 4:14 pm

ya i wanna know too, for my gs, gotta have all hp i can get

ProtegeSTS · Post by **ProtegeSTS** » March 22nd, 2003, 5:37 pm

<blockquote>quote:<hr>Originally posted by The_Great_Tonge:
well has anyone swap that maf for theres on a RS? if so did you feel any gains? is it worth it? because some say it does work and some say it doesnt. so if someone who has done it could speak up it would be nice, thanks!<hr></blockquote>________________________________________From Randy Stocker,
"If you never turn the motor past 6000 rpm then you'd be wasting your time. The factory flowmeter CFM threshold before limiting HP is about 6000 rpm with the 1.6 motor (the stock engine will flow 178 CFM at 7200 rpm while the meter is rated only at 165CFM). If your 1.6 motor is relatively unmodified (maybe a performance muffler and intake plumbing) but you regularly go past 6000 rpm then putting the RX-7 unit in will produce about a 5 HP gain, you'll probably only notice it after 6000 rpm though."
__________________________________________You have a motor that doesn't breathe as well as the 1.6L miata. Unless you're running cams, it's useless.

ProtegeSTS · Post by **ProtegeSTS** » March 22nd, 2003, 5:38 pm

<blockquote>quote:<hr>Originally posted by mitmaks:
ya i wanna know too, for my gs, gotta have all hp i can get<hr></blockquote>The GS and RS don't even use the same TYPE of airflow meter!!!

The_Great_Tonge · Post by **The_Great_Tonge** » March 22nd, 2003, 8:14 pm

well if anone with a MAZDA MX3 has done it could they please speak up, thank you

MX-3.com

RX-7 MAF

RX-7 MAF

Re: RX-7 MAF

Re: RX-7 MAF

Re: RX-7 MAF

Re: RX-7 MAF

Re: RX-7 MAF

Re: RX-7 MAF

Re: RX-7 MAF

Re: RX-7 MAF

Re: RX-7 MAF

Re: RX-7 MAF

Re: RX-7 MAF