wire connector help!

[mazdaspeed23]

Hey guys finally got some time to start putting the dash back together, but I have a problem ( i think). Theres a white connector under the dash on the drivers side its in the harness where the relays are just behind the fuse panel. I cant seem to find anywhere for it to connect to? The wires colours are Green, Green W orange,black,red, white W green

[WhiteFinish]

Picture ? what year car? Is it pre or post facelift

[mazdaspeed23]

Sorry its a 94 klze. Pic is here

[mazdaspeed23]

any idea?

[mazdaspeed23]

any one?

[mazdaspeed23]

so I took the dash out and the joint box today, and there is no extra connector for this piece to connect to.

[mazdaspeed23]

So I finally found out what that connector is for, had to search through my Alldata for a while, but it's the connector for power locks which I don't have in this car.

[WhiteFinish]

Wires is always looking for a needle in a (mx3) haystack.

[mazdaspeed23]

it's crazy. I have heard ample of times that Mazda had the same wiring for the mx3's from its first production car to 93. in 94 they changed some wiring then changed it back to normal in 95. does anyone know what exactly wires were changed? In my all data it shows the exact same wire colour coding as the 95 and 93.

[WhiteFinish]

If you already found out why the plug is disconnected, what else do you need?

[mazdaspeed23]

Nothing. Was just curious to know if anyone knew about the different wires