matts 94 mx-3 gs build. MOARRRRR GOODIES
- kulluminati777
- Senior Member
- Posts: 2509
- Joined: July 11th, 2010, 11:10 am
- antispam: ~SPAM*SUX~
- Location: Sunny California
- Contact:
Re: matts 94 mx-3 gs build. MOARRRRR GOODIES
AHHH!!! IM BLIND!!!!!!!!!! Thats the best KL I have seen in a while!
- fowljesse
- Supporting Member
- Posts: 5676
- Joined: March 17th, 2006, 2:59 pm
- Location: portland, OR
- Contact:
Re: matts 94 mx-3 gs build. MOARRRRR GOODIES
That's a good choice. Chasing the dream of 200HP isn't for everyone. If you have the inclination, you can put in high compression pistons, and bigger cams, etc.. down the road. Honestly, The butt dyno doesn't know much of a difference, and even so, one gets used to what he has.
My car feels slow now, but so did my street bike after a while. I wonder if jet pilots get used to the acceleration. I thought that there was something wrong with my bike, but it still did 0-100 in the same time (about half of what my car can do). I said on another thread; Build what you can, and DRIVE it! There are SO many big HP projects sitting in garages for years, getting ZEROhp! It's like, in the HotRod days, I loved driving by guys polishing their cars, or working on them thinking "I'll have 500+HP one day.." I was having the same amount of fun, or more as they thought they would one day. In fact, those guys would have less fun, because they spent so much time and money, banking on having more fun because of it, or they were afraid to drive, and scratch it, or break something.
I hope it all goes smoothly, and you're having fun soon
My car feels slow now, but so did my street bike after a while. I wonder if jet pilots get used to the acceleration. I thought that there was something wrong with my bike, but it still did 0-100 in the same time (about half of what my car can do). I said on another thread; Build what you can, and DRIVE it! There are SO many big HP projects sitting in garages for years, getting ZEROhp! It's like, in the HotRod days, I loved driving by guys polishing their cars, or working on them thinking "I'll have 500+HP one day.." I was having the same amount of fun, or more as they thought they would one day. In fact, those guys would have less fun, because they spent so much time and money, banking on having more fun because of it, or they were afraid to drive, and scratch it, or break something.
I hope it all goes smoothly, and you're having fun soon
'93 GS - P&P DE w/ ZE exh. cams/ pistns, KLG4 IM, 65mm TB, MSnS, Phenos, K&N RAI, UDP, Grnd wires, rear batt, filld MM, torq strt, TWM short shftr, Exedy, Lng tube hdrs 2.5" Side exhaust, H&R sprngs, Poly bushngs, strutbars, Alum. crss mmber&tiebar, 22mm swybar, solid links, Direzzas, leather int, Alpine 9805 stereo & alrm, keyless entry, 10 Boston Accoustics spkrs, Prjectrs, Blaster2, CF hood, FG hatch, Lexan
Re: matts 94 mx-3 gs build. MOARRRRR GOODIES
thats what i'm saying too. dont feel like telling every how amazing my project is. i'd rather show off something real and respectable rather then just talk about it.
ordered my corksport clutch line tonight. just trying to work out all the details. next 2 weeks it'll be in no matter what.
ordered my corksport clutch line tonight. just trying to work out all the details. next 2 weeks it'll be in no matter what.
Re: matts 94 mx-3 gs build. MOARRRRR GOODIES
so gotta do some remounting and rewiring today. took a corner pretty quick last night and the amp broke of the back seat..... cool sparks tho ahaha.
Re: matts 94 mx-3 gs build. MOARRRRR GOODIES
Eww, nice and shiny. Right now might be a good time to pull the trans and replace the fly wheel with the lighter K8 FW. Other than that, looks good
Umm just a thought. You've looked into clearance problems using the straight neck right?
Umm just a thought. You've looked into clearance problems using the straight neck right?
2004 Subaru WRX Silver, stage 2, minty interior.
2002 Subaru WRX Blue, SOLD (best E test numbers I've ever seen)
94 MX-6. Sold
92 GS KLZE 5 Speed
96 GS 5 speed, KLZE, Sold
95 GS Minty Shape Sold
92 GS Sold
92 GS Parts Car scrapped.
Feedback viewtopic.php?f=37&t=66348" onclick="window.open(this.href);return false;
7477th member.
I know you believe that you understand what you think I said but I'm sure you realize that what you heard is not what I meant.
2002 Subaru WRX Blue, SOLD (best E test numbers I've ever seen)
94 MX-6. Sold
92 GS KLZE 5 Speed
96 GS 5 speed, KLZE, Sold
95 GS Minty Shape Sold
92 GS Sold
92 GS Parts Car scrapped.
Feedback viewtopic.php?f=37&t=66348" onclick="window.open(this.href);return false;
7477th member.
I know you believe that you understand what you think I said but I'm sure you realize that what you heard is not what I meant.
Re: matts 94 mx-3 gs build. MOARRRRR GOODIES
its the short straight neck and from what i've read i can make it fit without booster modification.
tomorrow i'll finish polishing the valve covers, and some point this week the motors gotta get moved to my shop so we can swap the belts and pulleys.
i'm actually leaving the probe tranny and flywheel mounted for now to save time and labor. it'll be coming back out in the spring for a solid cleaning, paint, and the power steering removal that i cant afford to do right now.
in the spring i'll hopefully have the plan figured out on how to delete power steering.
once i've got that figured out i'll throw in the newly modified mx6/mazdaspeed diff equipped transmission. unless of course something breaks and i'm forced to install it sooner lol.
still waiting patiently on the arrival of my megasquirt, as well as my stainless clutch and brakelines from corksport.
tomorrow i'll finish polishing the valve covers, and some point this week the motors gotta get moved to my shop so we can swap the belts and pulleys.
i'm actually leaving the probe tranny and flywheel mounted for now to save time and labor. it'll be coming back out in the spring for a solid cleaning, paint, and the power steering removal that i cant afford to do right now.
in the spring i'll hopefully have the plan figured out on how to delete power steering.
once i've got that figured out i'll throw in the newly modified mx6/mazdaspeed diff equipped transmission. unless of course something breaks and i'm forced to install it sooner lol.
still waiting patiently on the arrival of my megasquirt, as well as my stainless clutch and brakelines from corksport.
Re: matts 94 mx-3 gs build. MOARRRRR GOODIES
so cant sleep and decided to start working on the rear speaker cover repairs(speaker mount posts). does anyone else have issues with theres breaking constantly?
what can i use or do to make it a one time repair?
what can i use or do to make it a one time repair?
Re: matts 94 mx-3 gs build. MOARRRRR GOODIES
These are pics of the repair I made on the rear covers. If the posts don't hold I'm gonna try using some metal sleeves over the plastic speaker posts to keep them from snapping.
For the holes in the cover mounts I cut up warranty trim panels off a new mustang and shaped blanks as close to the shape of the holes and plastic welded them. Gonna brush on a dab of paint and hopefully they clean up nice.
Re: matts 94 mx-3 gs build. MOARRRRR GOODIES
ok is there a write up on clearance issues with a de manifold?
shits got me hella paranoid and my swap got pushed till sunday feb.3rd
i'm gonna pick up a 90degree elbow so i can clear the battery until i do the relocation.
timing belt and water pump is done. still gotta do the oil pan and finish polishing my valve covers but i'm pretty much ready to swap.
but t his manifold issue has me worried and i can't have this car off the road for more then a day or 2 at the most.
shits got me hella paranoid and my swap got pushed till sunday feb.3rd
i'm gonna pick up a 90degree elbow so i can clear the battery until i do the relocation.
timing belt and water pump is done. still gotta do the oil pan and finish polishing my valve covers but i'm pretty much ready to swap.
but t his manifold issue has me worried and i can't have this car off the road for more then a day or 2 at the most.
Re: matts 94 mx-3 gs build. MOARRRRR GOODIES
Ohhhhhhhhh mannnnnnnnnnnnnnn.
-
- Regular Member
- Posts: 155
- Joined: August 7th, 2010, 11:03 am
- antispam: ~SPAM*SUX~
Re: matts 94 mx-3 gs build. MOARRRRR GOODIES
So I've got a coolant problem. Getting weird pressure and causing the upper rad hose to collapse. No overheating tho.
Not gonna worry about it much cuz new motor is supposed to go in on sunday. It's not a sure thing yet but I've got my fingers crossed.
Slowly working on collecting all my associated parts for the megasquirt install.
Today I ordered a vac block that'll mount to the firewall in an attempt to clean up the vac lines,as well as a couple blue silicone vibrant pit packs of various sizes.
I've realized as I'm taping the names on the various plugs that the wiring tuck is gonna be more involved then I thought, so I'm gonna do a very partial intake tuck and when i take my vacation in the spring I'll spend it doing a more complete tuck.
Not gonna worry about it much cuz new motor is supposed to go in on sunday. It's not a sure thing yet but I've got my fingers crossed.
Slowly working on collecting all my associated parts for the megasquirt install.
Today I ordered a vac block that'll mount to the firewall in an attempt to clean up the vac lines,as well as a couple blue silicone vibrant pit packs of various sizes.
I've realized as I'm taping the names on the various plugs that the wiring tuck is gonna be more involved then I thought, so I'm gonna do a very partial intake tuck and when i take my vacation in the spring I'll spend it doing a more complete tuck.
Re: matts 94 mx-3 gs build. MOARRRRR GOODIES
So I took the plunge and bought a registered version of tunerstudio and the rs232 bluetooth adapter. I'm running out of stuff to buy!!!!
Decided that tomorrow night after work I'm gonna install squirt keeping the vaf until I'm more familiar with tuning.
Any tips would be greatly appreciated.
Install begins at 5pm tomorrow!!!!
Decided that tomorrow night after work I'm gonna install squirt keeping the vaf until I'm more familiar with tuning.
Any tips would be greatly appreciated.
Install begins at 5pm tomorrow!!!!
Re: matts 94 mx-3 gs build. MOARRRRR GOODIES
so the megasquirt is in using the vaf.
it runs. but not very well, i registed my tunerstudio to use the autotune feature and it works well.
its usuing my old stock narrownband sensors so i do have to wire in the wideband and it should start tuning well.
major surging idle problems and occasional stall when i burn a new setting to the ecu.
it runs. but not very well, i registed my tunerstudio to use the autotune feature and it works well.
its usuing my old stock narrownband sensors so i do have to wire in the wideband and it should start tuning well.
major surging idle problems and occasional stall when i burn a new setting to the ecu.
Last edited by mx3matt on February 2nd, 2013, 11:57 am, edited 1 time in total.
- WhiteFinish
- Regular Member
- Posts: 1635
- Joined: April 3rd, 2006, 9:48 am
- Location: Netherlands
- Contact:
Re: matts 94 mx-3 gs build. MOARRRRR GOODIES
thats normalmx3matt wrote: occasional stall when i burn a new setting to the ecu.
Good job though