K1 Rods and stock Rods weighed!
K1 Rods and stock Rods weighed!
My K1's came in the mail. I put them on my scale. But not my Male Scale, the Mail Scale. Pictures taken on scale. But not to scale.
Verdict:
K1's are about 10 grams lighter.
Verdict:
K1's are about 10 grams lighter.
Last edited by SuperK on August 25th, 2012, 5:08 pm, edited 1 time in total.
-
- Senior Member
- Posts: 5554
- Joined: August 25th, 2004, 2:01 am
- Location: Edmonton, Alberta, Canada
Re: K1 Rods and stock Rods weighted!
Don't leave your new rods out of the packaging too long. They will get all corroded. You don't want to get scale on your scale. Did you get those rods on sale? What about that scale? Was the scale on sale?
94' RS/GS/MS/CF Monster Turbo...coming soon.
93' GS SE, the Black Beast, the former love of my life...soon to be gutted and crushed.
94' GS, black on black, now in several small pieces...and one large crushed piece.
2007 Mazda3 GT Sport --- super fun
2004 Honda RC51 --- Lost forever to some theavin' bastard
My Worklog
My feedback thread
Never attribute to malice that which can be adequately explained by stupidity.
93' GS SE, the Black Beast, the former love of my life...soon to be gutted and crushed.
94' GS, black on black, now in several small pieces...and one large crushed piece.
2007 Mazda3 GT Sport --- super fun
2004 Honda RC51 --- Lost forever to some theavin' bastard
My Worklog
My feedback thread
Never attribute to malice that which can be adequately explained by stupidity.
Re: K1 Rods and stock Rods weighted!
I got the scale on sale before it went stale. The rods on sale but the pistons on sail and may get scale. I plan to get the mail before the skell grabs the shell of the package that hold the pistons with the scale from the sail. I'll put it on the scale that I got for sale, but i'll keep it in the package so none of them get stale.
-
- Senior Member
- Posts: 5554
- Joined: August 25th, 2004, 2:01 am
- Location: Edmonton, Alberta, Canada
Re: K1 Rods and stock Rods weighted!
Well now you're just being silly.
94' RS/GS/MS/CF Monster Turbo...coming soon.
93' GS SE, the Black Beast, the former love of my life...soon to be gutted and crushed.
94' GS, black on black, now in several small pieces...and one large crushed piece.
2007 Mazda3 GT Sport --- super fun
2004 Honda RC51 --- Lost forever to some theavin' bastard
My Worklog
My feedback thread
Never attribute to malice that which can be adequately explained by stupidity.
93' GS SE, the Black Beast, the former love of my life...soon to be gutted and crushed.
94' GS, black on black, now in several small pieces...and one large crushed piece.
2007 Mazda3 GT Sport --- super fun
2004 Honda RC51 --- Lost forever to some theavin' bastard
My Worklog
My feedback thread
Never attribute to malice that which can be adequately explained by stupidity.
- WhiteFinish
- Regular Member
- Posts: 1635
- Joined: April 3rd, 2006, 9:48 am
- Location: Netherlands
- Contact:
Re: K1 Rods and stock Rods weighted!
Thank you very much SuperK !!!
I was really looking for this info but nobody could tell me !
Did you get those rods on a sale ? Than I might be able to get them as well at this moment.
I was really looking for this info but nobody could tell me !
Did you get those rods on a sale ? Than I might be able to get them as well at this moment.
Re: K1 Rods and stock Rods weighted!
They weren't on "sale" but they offer them very slightly discounted when you get the rod/pistons as a kit.
- kulluminati777
- Senior Member
- Posts: 2509
- Joined: July 11th, 2010, 11:10 am
- antispam: ~SPAM*SUX~
- Location: Sunny California
- Contact:
Re: K1 Rods and stock Rods weighted!
too funny, and i would LOVE to get some of these. They look strong then the stock rods and thats cool they are light as well
Re: K1 Rods and stock Rods weighed!
they do require a 21mm wrist pin though.
- WhiteFinish
- Regular Member
- Posts: 1635
- Joined: April 3rd, 2006, 9:48 am
- Location: Netherlands
- Contact:
Re: K1 Rods and stock Rods weighed!
Did you already install the these rods ?
Did it require notching of the block ?
Did it require notching of the block ?
Re: K1 Rods and stock Rods weighed!
have not installed them yet. But the weights aren't accurate. Stupid scale is only +/- 5grams accurate. stupid scale.
- fowljesse
- Supporting Member
- Posts: 5676
- Joined: March 17th, 2006, 2:59 pm
- Location: portland, OR
- Contact:
Re: K1 Rods and stock Rods weighed!
Bail on the failed frail scale. It should be in jail. But, don't let it be this tale's coffin nail, as those who want to know might wail. The comparison will still pail. Don't curtail, prevail!
'93 GS - P&P DE w/ ZE exh. cams/ pistns, KLG4 IM, 65mm TB, MSnS, Phenos, K&N RAI, UDP, Grnd wires, rear batt, filld MM, torq strt, TWM short shftr, Exedy, Lng tube hdrs 2.5" Side exhaust, H&R sprngs, Poly bushngs, strutbars, Alum. crss mmber&tiebar, 22mm swybar, solid links, Direzzas, leather int, Alpine 9805 stereo & alrm, keyless entry, 10 Boston Accoustics spkrs, Prjectrs, Blaster2, CF hood, FG hatch, Lexan
-
- Senior Member
- Posts: 5554
- Joined: August 25th, 2004, 2:01 am
- Location: Edmonton, Alberta, Canada
Re: K1 Rods and stock Rods weighed!
Pfft...what's with this wierdo??? ^^^
94' RS/GS/MS/CF Monster Turbo...coming soon.
93' GS SE, the Black Beast, the former love of my life...soon to be gutted and crushed.
94' GS, black on black, now in several small pieces...and one large crushed piece.
2007 Mazda3 GT Sport --- super fun
2004 Honda RC51 --- Lost forever to some theavin' bastard
My Worklog
My feedback thread
Never attribute to malice that which can be adequately explained by stupidity.
93' GS SE, the Black Beast, the former love of my life...soon to be gutted and crushed.
94' GS, black on black, now in several small pieces...and one large crushed piece.
2007 Mazda3 GT Sport --- super fun
2004 Honda RC51 --- Lost forever to some theavin' bastard
My Worklog
My feedback thread
Never attribute to malice that which can be adequately explained by stupidity.
- ruthless_mx3
- Regular Member
- Posts: 183
- Joined: October 3rd, 2003, 2:01 am
- Location: Tampa, FL
Re: K1 Rods and stock Rods weighed!
Not sure where you got yours from or how much you paid but when i bought mine i got them from http://www.importperformanceparts.net/. That was the cheapest place i could find them and they were quick with the shipping.
As far as the pin diameter is concerned....you can order them in whatever pin size you choose. You just need to make sure to order them sized to whichever pistons you have. I happened to already have weisco pistons on millenia s rods so, when i ordered my k1 rods i got them with the 21mm pin diameter to match my pistons. If you have pistons with the stock pin diameter then you would want to order the rods with a 20mm pin (i think that's the stock size).
Also, I had everything balanced and have the printout of all the weights of everything. I'll try to find it and I'll post the weights that they gave me. Their scale is accurate down to .001 grams so that should clear up any discrepancies over the on sale sail scale tale.
As far as the pin diameter is concerned....you can order them in whatever pin size you choose. You just need to make sure to order them sized to whichever pistons you have. I happened to already have weisco pistons on millenia s rods so, when i ordered my k1 rods i got them with the 21mm pin diameter to match my pistons. If you have pistons with the stock pin diameter then you would want to order the rods with a 20mm pin (i think that's the stock size).
Also, I had everything balanced and have the printout of all the weights of everything. I'll try to find it and I'll post the weights that they gave me. Their scale is accurate down to .001 grams so that should clear up any discrepancies over the on sale sail scale tale.
93 MX3 GS SE KLZE -- RIP May 1, 2011
14.007 @ 98.46 1.991 60ft -- the only time she made it to the 1/4
92 MX3 GS aka Goldmember - I'm trying to keep the legend going and as always credit to Andy for starting the legend
sc61 currently @ 8 psi, wiseco 10:1 pistons, K1 rods, ported ze heads w/ kl31 cams