FS: Eaton M62 S/C Supercharger

jschrauwen · Post by **jschrauwen** » February 8th, 2011, 9:49 am

Still up for grabs.

jschrauwen · Post by **jschrauwen** » February 24th, 2011, 8:16 pm

Still available.

jschrauwen · Post by **jschrauwen** » May 11th, 2011, 1:40 pm

Sold.

Time to clean up the LSD transmission for sale.

PATDIESEL · Post by **PATDIESEL** » May 11th, 2011, 6:14 pm

Was yours a stock Jspec w/LSD like mine?
BTW- hope you and your family are well JBeef

jschrauwen · Post by **jschrauwen** » May 11th, 2011, 6:45 pm

PATDIESEL wrote:Was yours a stock Jspec w/LSD like mine?
BTW- hope you and your family are well JBeef

Hi Pat and thanks. Family is fine but it appears my Bells Palsy has returned to haunt me again.

I believe it is the stock LSD. I hand picked the KZE engine it was attached to as it came out of the sea container in 2005 at Tigerjapanese. IIRC, out of the 7 KLZE engine that came in, 3 had the LSD and I picked the best of those 3. I believe it has the 26mm axles that were cut halfway as is normal for exporting. I actually watched over the separating of the transmission from the ZE engine. It's been sitting in storage for the last 6 years. I don't kow what the going price is for these now as I'm sure they are pretty scarce but I paid $500.00 for it 6 years ago.

BTW, you still running those Euro vents I sent you?

jschrauwen · Post by **jschrauwen** » February 13th, 2012, 10:10 pm

LSD Transmission still available. $325.00 firm

diezzel · Post by **diezzel** » February 14th, 2012, 6:03 pm

Can you get a quote to ship it to T5S-1T6. Thank you .

diezzel · Post by **diezzel** » February 14th, 2012, 6:26 pm

I changed my mind . Thanks

PATDIESEL · Post by **PATDIESEL** » February 17th, 2012, 3:08 pm

Was this the J-spec LSD that needs the longer drivers axle inner shaft? (like mine)

jschrauwen · Post by **jschrauwen** » February 17th, 2012, 6:27 pm

PATDIESEL wrote:Was this the J-spec LSD that needs the longer drivers axle inner shaft? (like mine)

Could be Pat. I had it separated from a newly imported JDM MX6 engine in 2005. I personally hand picked the engine/transmission as it was coming out of the sea container and personally over-seen the actual separation of the transmission from the engine before I bought it. Paid $500.00 plus taxes back then too.
Pat - I've had a couple of tire kickers on this tranny but they wanted to know where to source axles for it. Are you aware of how or where these axles can be sourced?

jschrauwen · Post by **jschrauwen** » February 26th, 2012, 3:40 pm

LSD sold.
$325.00 shipped/delivered.
Many thanks Barry!

MX-3.com

FS: Eaton M62 S/C Supercharger

Re: FS: Eaton M62 S/C Supercharger

Re: FS: Eaton M62 S/C Supercharger

Re: FS: Eaton M62 S/C Supercharger

Re: FS: Eaton M62 S/C Supercharger

Re: FS: Eaton M62 S/C Supercharger

Re: FS: Eaton M62 S/C Supercharger

Re: FS: Eaton M62 S/C Supercharger

Re: FS: Eaton M62 S/C Supercharger

Re: FS: Eaton M62 S/C Supercharger

Re: FS: Eaton M62 S/C Supercharger

Re: FS: Eaton M62 S/C Supercharger