![Smile :)](./images/smilies/icon_smile.gif)
weede`s KL-ZE Supercharger - Megasquirt
- ethand
- Regular Member
- Posts: 766
- Joined: October 21st, 2010, 10:44 pm
- antispam: ~SPAM*SUX~
- Location: Western Australia
Re: 94" weede`s JDM MX-3ZE - LSD with PAR-Engineering
Nice, I love the 206's, they're a nice car... A few of my mates had them... with a little bit of tuning, they make a decent amount of grunt, too, and drive pretty nicely. They also look real sharp with a few minor mods, too ![Smile :)](./images/smilies/icon_smile.gif)
![Smile :)](./images/smilies/icon_smile.gif)
![Image](http://img828.imageshack.us/img828/40/zekepixelcar.jpg)
'92 JDM Eunos Presso - Zeke
-
- Regular Member
- Posts: 155
- Joined: August 7th, 2010, 11:03 am
- antispam: ~SPAM*SUX~
Re: 94" weede`s JDM MX-3ZE - BIG BRAKE KIT!
BIG BRAKE KIT - MAZDA 6 - 283mm width and 25mm th.
323v6 spingle (powder coated) + OEM KOYO bearings + new seals
whole calipers were diassembled and powder coated
![Image](http://img850.imageshack.us/img850/3428/69886331.jpg)
and assembled with new seals
![Image](http://img600.imageshack.us/img600/8193/20460368.jpg)
4x100 CNC drilled
in action
![Image](http://img26.imageshack.us/img26/4768/90705191.jpg)
...aaand ready, back side
...front
my setup looks like this:
FRONT:
- 323v6 spindles
- mx3 bearing
- mx3 hub
- mazda 6 calipers with new seals
- mazda 6 BREMBO rotors with 4x100
- custom spacers
- Goodridge steel lines
- FERODO pads
- MOTUL RBF600 fluid
BACK
- mx3 BREMBO rotos
- mx3 calipers + new seals
- Goodridge steel lines
- Kashiyama pads
And at last, my girlfriend christmas gift
![Image](http://img442.imageshack.us/img442/3654/kaskz.jpg)
![Very Happy :D](./images/smilies/icon_biggrin.gif)
323v6 spingle (powder coated) + OEM KOYO bearings + new seals
![Image](http://img832.imageshack.us/img832/7586/94648440.jpg)
whole calipers were diassembled and powder coated
![Image](http://img850.imageshack.us/img850/3428/69886331.jpg)
and assembled with new seals
![Image](http://img600.imageshack.us/img600/8193/20460368.jpg)
4x100 CNC drilled
![Image](http://img829.imageshack.us/img829/8895/51763786.jpg)
in action
![Very Happy :D](./images/smilies/icon_biggrin.gif)
![Image](http://img26.imageshack.us/img26/4768/90705191.jpg)
...aaand ready, back side
![Image](http://img28.imageshack.us/img28/5928/90958925.jpg)
...front
![Cool 8)](./images/smilies/icon_cool.gif)
![Image](http://img213.imageshack.us/img213/9413/84982800.jpg)
![Image](http://img210.imageshack.us/img210/3494/56343886.jpg)
![Image](http://img440.imageshack.us/img440/254/55613602.jpg)
my setup looks like this:
FRONT:
- 323v6 spindles
- mx3 bearing
- mx3 hub
- mazda 6 calipers with new seals
- mazda 6 BREMBO rotors with 4x100
- custom spacers
- Goodridge steel lines
- FERODO pads
- MOTUL RBF600 fluid
BACK
- mx3 BREMBO rotos
- mx3 calipers + new seals
- Goodridge steel lines
- Kashiyama pads
And at last, my girlfriend christmas gift
![Very Happy :D](./images/smilies/icon_biggrin.gif)
![Image](http://img442.imageshack.us/img442/3654/kaskz.jpg)
- Josh
- Supporting Member
- Posts: 3432
- Joined: April 18th, 2002, 2:01 am
- Location: Washington state
- Contact:
Re: 94" weede`s JDM MX-3ZE - BIG BRAKE KIT!
Very nice! those calipers look beefy in there
Josh
95' AWD MX-3 RST - (work log - http://www.mx-3.com/phpBB3/viewtopic.php?f=46&t=73765 )
94' GS - KLZE DD (work log - viewtopic.php?uid=2713&f=46&t=79063&start=0 )
05' MS RX-8 - Parted out and Sold :'(
Feedback - http://www.mx-3.com/phpBB3/viewtopic.php?f=37&t=49519
Cardomain Page - http://www.cardomain.com/ride/408020
Face Book page http://www.facebook.com/pages/Mazda-MX- ... 3472959216
95' AWD MX-3 RST - (work log - http://www.mx-3.com/phpBB3/viewtopic.php?f=46&t=73765 )
94' GS - KLZE DD (work log - viewtopic.php?uid=2713&f=46&t=79063&start=0 )
05' MS RX-8 - Parted out and Sold :'(
Feedback - http://www.mx-3.com/phpBB3/viewtopic.php?f=37&t=49519
Cardomain Page - http://www.cardomain.com/ride/408020
Face Book page http://www.facebook.com/pages/Mazda-MX- ... 3472959216
-
- Regular Member
- Posts: 1523
- Joined: March 8th, 2010, 7:21 pm
- antispam: ~SPAM*SUX~
- Location: Canandaigua, NY
Re: 94" weede`s JDM MX-3ZE - BIG BRAKE KIT!
You really need to find me a set of those spindles and get them overseas lol
92 GS gold (driver) worklog> http://mx-3.com/phpBB3/viewtopic.php?f=46&t=73405" onclick="window.open(this.href);return false;
93 GS red (wrecked)
I modify my ride so I can drive around the stupid people ![Very Happy :D](./images/smilies/icon_biggrin.gif)
93 GS red (wrecked)
![Very Happy :D](./images/smilies/icon_biggrin.gif)
![Very Happy :D](./images/smilies/icon_biggrin.gif)
- solo_ryder
- Senior Member
- Posts: 6289
- Joined: October 16th, 2004, 2:01 am
- Location: British Columbia
Re: 94" weede`s JDM MX-3ZE - BIG BRAKE KIT!
lookin good! I want your car. If I ever come to poland, hide your kids, hide your wife, hide your mx3
-
- Regular Member
- Posts: 155
- Joined: August 7th, 2010, 11:03 am
- antispam: ~SPAM*SUX~
- MrMazda92
- Supporting Member
- Posts: 5201
- Joined: October 8th, 2009, 5:35 pm
- antispam: No
- Location: Midwest
Re: 94" weede`s JDM MX-3ZE - BIG BRAKE KIT!
How is braking with those bad boys?!
They're huge...
![Love :love:](./images/smilies/love.gif)
They're huge...
Daily:
'12 Challenger R/T + STP - 3.92 w/ LSD, JG Cam, headers, SkipShift delete, Clutch Delay Valve delete, Hurst STS, RAM Clutch Adjuster, StopTech 6 Piston Brakes, Sticky Nittos, 435 WHP
Kid Hauler:
'08 Suburban LT 4WD - TVS 1900 Blower, LF SC Cam, headers, AFM delete, true 5" lift, 33x12s, 523 WHP
First Love:
'92 GS 5 spd - Straightneck KL/67mm TB, MegaSquirt/Coilpacks, 5 lugs/Speed6 brakes/FD wheels, wiretuck, coilovers, headers, AEM WB, Borla
Deleted: VAF/Power Steering/Air Conditioning/EGR/ABS/Auto Seatbelts/etc
'12 Challenger R/T + STP - 3.92 w/ LSD, JG Cam, headers, SkipShift delete, Clutch Delay Valve delete, Hurst STS, RAM Clutch Adjuster, StopTech 6 Piston Brakes, Sticky Nittos, 435 WHP
Kid Hauler:
'08 Suburban LT 4WD - TVS 1900 Blower, LF SC Cam, headers, AFM delete, true 5" lift, 33x12s, 523 WHP
First Love:
'92 GS 5 spd - Straightneck KL/67mm TB, MegaSquirt/Coilpacks, 5 lugs/Speed6 brakes/FD wheels, wiretuck, coilovers, headers, AEM WB, Borla
Deleted: VAF/Power Steering/Air Conditioning/EGR/ABS/Auto Seatbelts/etc
- WhiteFinish
- Regular Member
- Posts: 1635
- Joined: April 3rd, 2006, 9:48 am
- Location: Netherlands
- Contact:
Re: 94" weede`s JDM MX-3ZE - BIG BRAKE KIT!
Looking good !!
Have you also made a picture of the Mazda 6 caliper side by side to the mx3 ?
Have you also made a picture of the Mazda 6 caliper side by side to the mx3 ?
-
- Regular Member
- Posts: 155
- Joined: August 7th, 2010, 11:03 am
- antispam: ~SPAM*SUX~
- WhiteFinish
- Regular Member
- Posts: 1635
- Joined: April 3rd, 2006, 9:48 am
- Location: Netherlands
- Contact:
Re: 94" weede`s JDM MX-3ZE - BIG BRAKE KIT!
What kind of spacer did you have to make ? Between spindle and caliper or between the hub and rim.
-
- Regular Member
- Posts: 155
- Joined: August 7th, 2010, 11:03 am
- antispam: ~SPAM*SUX~
Re: 94" weede`s JDM MX-3ZE - BIG BRAKE KIT!
brake caliper from mazda 6 is p&p to 323v6 spindle (i pasted photo in this topic) and a spacer is made from aluminium (custom made and i have one set for sale - 25euro + shipping)WhiteFinish wrote:What kind of spacer did you have to make ? Between spindle and caliper or between the hub and rim.
-
- Regular Member
- Posts: 155
- Joined: August 7th, 2010, 11:03 am
- antispam: ~SPAM*SUX~
Re: 94" weede`s JDM MX-3ZE - BIG BRAKE KIT!
Some more stuff...
Oil-Relocation-Kit
MOCAL Take-off plate, MOCAL mount, MOCAL plate with thermostat + Knecht Filter. And yes i bought MOCAL oil cooler
IC 550mm
Soon more updates...
Oil-Relocation-Kit
![Image](http://img213.imageshack.us/img213/5469/oilrelocate.jpg)
MOCAL Take-off plate, MOCAL mount, MOCAL plate with thermostat + Knecht Filter. And yes i bought MOCAL oil cooler
![Laughing :lol:](./images/smilies/icon_lol.gif)
IC 550mm
![Image](http://img824.imageshack.us/img824/6366/49270942.jpg)
Soon more updates...
- WhiteFinish
- Regular Member
- Posts: 1635
- Joined: April 3rd, 2006, 9:48 am
- Location: Netherlands
- Contact:
Re: 94" weede`s JDMstyle MX-3ZE
weede_klze wrote:No its Cooper S rootors, but i gave up with it and bought Mazda 6 rotors and caliperssoon i will take some photos.
I have another question on the mazda 6 roto / caliper
Do you know about mazda6 type 1 and type 2 ?
From what year did you get the calipers and rotors?
I think rotors type 1 are 275mm, type 2 are 283/286mm.
-
- Regular Member
- Posts: 155
- Joined: August 7th, 2010, 11:03 am
- antispam: ~SPAM*SUX~
Re: 94" weede`s JDM MX-3ZE - BIG BRAKE KIT!
I have calipers from Mazda 6 GG 2002.08. Rotors are 282,5th
- fowljesse
- Supporting Member
- Posts: 5676
- Joined: March 17th, 2006, 2:59 pm
- Location: portland, OR
- Contact:
Re: 94" weede`s JDM MX-3ZE - BIG BRAKE KIT!
Such an awesome job on your car. I'm feeling emotional ![Love :love:](./images/smilies/love.gif)
![Love :love:](./images/smilies/love.gif)
'93 GS - P&P DE w/ ZE exh. cams/ pistns, KLG4 IM, 65mm TB, MSnS, Phenos, K&N RAI, UDP, Grnd wires, rear batt, filld MM, torq strt, TWM short shftr, Exedy, Lng tube hdrs 2.5" Side exhaust, H&R sprngs, Poly bushngs, strutbars, Alum. crss mmber&tiebar, 22mm swybar, solid links, Direzzas, leather int, Alpine 9805 stereo & alrm, keyless entry, 10 Boston Accoustics spkrs, Prjectrs, Blaster2, CF hood, FG hatch, Lexan