[FS] Euro mx3 breaking
- marcdh
- Regular Member
- Posts: 1460
- Joined: July 26th, 2006, 3:54 pm
- Location: Belfast -Northern Ireland
- Contact:
[FS] Euro mx3 breaking
Sill collapsed jacking it up to replace trailing arm Underside is officially iron oxide.
PHOTO ALBUM OF PARTS, will be added to as they come off:
http://s49.photobucket.com/albums/f295/marcdh/breaking/
Parts:
Doors are in good condition £25 each (UK only due to postage extortion)
Wing mirrors £12 a side
Rear hatch and glass £40 (UK only due to postage extortion)
Rear bumper, very good condition, was pro resprayed a few years ago £50 (UK only due to postage extortion)
Front bumper, reasonable condition £30 (UK only due to postage extortion)
Bonnet good condition, but stone chipped as you'd expect £40 (UK only due to postage extortion)
Gearbox £50 or £100 with taller 5th gear to drop revs by 6-700rpm for cruising mpg and higher top speed
Can sell taller 5th for £50 separately if there's interest
As new Exedy/Daiken/OEM pressure plate £40
Exedy clutch Disc (had to clean up the splines) £20
Skimmed KF01 flywheel 16.8lbs (always reskim flywheel before new clutch!) Machining cost £30, used for half a mile, yours with new high quality pilot bearing for £45
-40mm lowering springs, only about 12k on these £55
Rear brake calipers, about 15k on these £25 a side
1.8 ECU, quite possibly chippable, will check £30
JE50 VAF £20
ABS Computer £20
ABS Sensors £10 a corner
Rear wheel bearings £30 a side
Rear spoiler, rattle can respray £20
Alternator £25
Glass Headlights £20 a side, can remove and just ship glass to save postage
http://i49.photobucket.com/albums/f295/ ... G_0752.jpg
http://i49.photobucket.com/albums/f295/ ... G_0753.jpg
Euro bumper support £15
Seats £50 for the lot
Euro Sliders, one mounting tab damaged, other 5 intact so will still be stable £15
http://i49.photobucket.com/albums/f295/ ... 28a6cb.jpg
http://i49.photobucket.com/albums/f295/ ... 376a73.jpg
Usual other parts available. I can take photos upon request.
SOLD with thanks:
Euro tow hook to Daninski
4x Bilstein Shocks to Hammy
Stainless cat back to Hammy
Mini euro side skirts to stangant
PHOTO ALBUM OF PARTS, will be added to as they come off:
http://s49.photobucket.com/albums/f295/marcdh/breaking/
Parts:
Doors are in good condition £25 each (UK only due to postage extortion)
Wing mirrors £12 a side
Rear hatch and glass £40 (UK only due to postage extortion)
Rear bumper, very good condition, was pro resprayed a few years ago £50 (UK only due to postage extortion)
Front bumper, reasonable condition £30 (UK only due to postage extortion)
Bonnet good condition, but stone chipped as you'd expect £40 (UK only due to postage extortion)
Gearbox £50 or £100 with taller 5th gear to drop revs by 6-700rpm for cruising mpg and higher top speed
Can sell taller 5th for £50 separately if there's interest
As new Exedy/Daiken/OEM pressure plate £40
Exedy clutch Disc (had to clean up the splines) £20
Skimmed KF01 flywheel 16.8lbs (always reskim flywheel before new clutch!) Machining cost £30, used for half a mile, yours with new high quality pilot bearing for £45
-40mm lowering springs, only about 12k on these £55
Rear brake calipers, about 15k on these £25 a side
1.8 ECU, quite possibly chippable, will check £30
JE50 VAF £20
ABS Computer £20
ABS Sensors £10 a corner
Rear wheel bearings £30 a side
Rear spoiler, rattle can respray £20
Alternator £25
Glass Headlights £20 a side, can remove and just ship glass to save postage
http://i49.photobucket.com/albums/f295/ ... G_0752.jpg
http://i49.photobucket.com/albums/f295/ ... G_0753.jpg
Euro bumper support £15
Seats £50 for the lot
Euro Sliders, one mounting tab damaged, other 5 intact so will still be stable £15
http://i49.photobucket.com/albums/f295/ ... 28a6cb.jpg
http://i49.photobucket.com/albums/f295/ ... 376a73.jpg
Usual other parts available. I can take photos upon request.
SOLD with thanks:
Euro tow hook to Daninski
4x Bilstein Shocks to Hammy
Stainless cat back to Hammy
Mini euro side skirts to stangant
Last edited by marcdh on December 12th, 2011, 4:29 pm, edited 6 times in total.
AZ-3 1498cc Turbo! EVO 8 turbo and manifold, 5 stud swap, SSR Type C, DIYPNP seq Megasquirt
Mx-3 2.5 V6 Turbo 291 BHP 251 lbft @ 8psi - Retired due to rust and back at uni
View Worklog
Mx-3 2.5 V6 Turbo 291 BHP 251 lbft @ 8psi - Retired due to rust and back at uni
View Worklog
- Josh
- Supporting Member
- Posts: 3432
- Joined: April 18th, 2002, 2:01 am
- Location: Washington state
- Contact:
Re: [FS] Euro mx3 breaking
Sad, such a nice car on the outside.
PM sent!
PM sent!
Josh
95' AWD MX-3 RST - (work log - http://www.mx-3.com/phpBB3/viewtopic.php?f=46&t=73765 )
94' GS - KLZE DD (work log - viewtopic.php?uid=2713&f=46&t=79063&start=0 )
05' MS RX-8 - Parted out and Sold :'(
Feedback - http://www.mx-3.com/phpBB3/viewtopic.php?f=37&t=49519
Cardomain Page - http://www.cardomain.com/ride/408020
Face Book page http://www.facebook.com/pages/Mazda-MX- ... 3472959216
95' AWD MX-3 RST - (work log - http://www.mx-3.com/phpBB3/viewtopic.php?f=46&t=73765 )
94' GS - KLZE DD (work log - viewtopic.php?uid=2713&f=46&t=79063&start=0 )
05' MS RX-8 - Parted out and Sold :'(
Feedback - http://www.mx-3.com/phpBB3/viewtopic.php?f=37&t=49519
Cardomain Page - http://www.cardomain.com/ride/408020
Face Book page http://www.facebook.com/pages/Mazda-MX- ... 3472959216
Re: [FS] Euro mx3 breaking
Too bad it is a nice clean looking MX-3
Dibs on Tow Hook? Shipped to KOK 1Y6 in Ontario Canada. I have PayPal. Thanks
Dibs on Tow Hook? Shipped to KOK 1Y6 in Ontario Canada. I have PayPal. Thanks
2004 Subaru WRX Silver, stage 2, minty interior.
2002 Subaru WRX Blue, SOLD (best E test numbers I've ever seen)
94 MX-6. Sold
92 GS KLZE 5 Speed
96 GS 5 speed, KLZE, Sold
95 GS Minty Shape Sold
92 GS Sold
92 GS Parts Car scrapped.
Feedback viewtopic.php?f=37&t=66348" onclick="window.open(this.href);return false;
7477th member.
I know you believe that you understand what you think I said but I'm sure you realize that what you heard is not what I meant.
2002 Subaru WRX Blue, SOLD (best E test numbers I've ever seen)
94 MX-6. Sold
92 GS KLZE 5 Speed
96 GS 5 speed, KLZE, Sold
95 GS Minty Shape Sold
92 GS Sold
92 GS Parts Car scrapped.
Feedback viewtopic.php?f=37&t=66348" onclick="window.open(this.href);return false;
7477th member.
I know you believe that you understand what you think I said but I'm sure you realize that what you heard is not what I meant.
- MrMazda92
- Supporting Member
- Posts: 5201
- Joined: October 8th, 2009, 5:35 pm
- antispam: No
- Location: Midwest
Re: [FS] Euro mx3 breaking
It's a crying shame I wish you could fix it, but car-cancer is a tough choice for most of us...
How much would shipping be on the front bumper support to 97402, USA?
Thank you very much.
How much would shipping be on the front bumper support to 97402, USA?
Thank you very much.
Daily:
'12 Challenger R/T + STP - 3.92 w/ LSD, JG Cam, headers, SkipShift delete, Clutch Delay Valve delete, Hurst STS, RAM Clutch Adjuster, StopTech 6 Piston Brakes, Sticky Nittos, 435 WHP
Kid Hauler:
'08 Suburban LT 4WD - TVS 1900 Blower, LF SC Cam, headers, AFM delete, true 5" lift, 33x12s, 523 WHP
First Love:
'92 GS 5 spd - Straightneck KL/67mm TB, MegaSquirt/Coilpacks, 5 lugs/Speed6 brakes/FD wheels, wiretuck, coilovers, headers, AEM WB, Borla
Deleted: VAF/Power Steering/Air Conditioning/EGR/ABS/Auto Seatbelts/etc
'12 Challenger R/T + STP - 3.92 w/ LSD, JG Cam, headers, SkipShift delete, Clutch Delay Valve delete, Hurst STS, RAM Clutch Adjuster, StopTech 6 Piston Brakes, Sticky Nittos, 435 WHP
Kid Hauler:
'08 Suburban LT 4WD - TVS 1900 Blower, LF SC Cam, headers, AFM delete, true 5" lift, 33x12s, 523 WHP
First Love:
'92 GS 5 spd - Straightneck KL/67mm TB, MegaSquirt/Coilpacks, 5 lugs/Speed6 brakes/FD wheels, wiretuck, coilovers, headers, AEM WB, Borla
Deleted: VAF/Power Steering/Air Conditioning/EGR/ABS/Auto Seatbelts/etc
- marcdh
- Regular Member
- Posts: 1460
- Joined: July 26th, 2006, 3:54 pm
- Location: Belfast -Northern Ireland
- Contact:
Re: [FS] Euro mx3 breaking
Thanks guys. Pretty gutted, but as I strip I see more and more rust. Definitely the right call. I'll reply to PMs etc tomorrow hopefully.
Some pics so far:
Some pics so far:
AZ-3 1498cc Turbo! EVO 8 turbo and manifold, 5 stud swap, SSR Type C, DIYPNP seq Megasquirt
Mx-3 2.5 V6 Turbo 291 BHP 251 lbft @ 8psi - Retired due to rust and back at uni
View Worklog
Mx-3 2.5 V6 Turbo 291 BHP 251 lbft @ 8psi - Retired due to rust and back at uni
View Worklog
- AaronTietje
- Regular Member
- Posts: 1196
- Joined: August 21st, 2009, 5:24 pm
- antispam: No
- Location: Prattsburgh NY
Re: [FS] Euro mx3 breaking
Hi, I'm interested in the front bumper support with fog light brackets and fog lights and................any fog light wire harness.
Thanks a ton,
Aaron
Pm me a total price shipped to NY state.
Thanks a ton,
Aaron
Pm me a total price shipped to NY state.
We all want to be fast and look cool. Cool changes but fast never does.
- DeepBlueMX3
- Regular Member
- Posts: 373
- Joined: September 13th, 2008, 9:02 pm
- Location: City:Americana Country:Brazil
- Contact:
Re: [FS] Euro mx3 breaking
Do you have door stainless steel sills?
If you do I'm interested, pics?
If you do I'm interested, pics?
- marcdh
- Regular Member
- Posts: 1460
- Joined: July 26th, 2006, 3:54 pm
- Location: Belfast -Northern Ireland
- Contact:
Re: [FS] Euro mx3 breaking
Yes Aaron, and PM'dAaronTietje wrote:
Not on this car, sorry!DeepBlueMX3 wrote:
AZ-3 1498cc Turbo! EVO 8 turbo and manifold, 5 stud swap, SSR Type C, DIYPNP seq Megasquirt
Mx-3 2.5 V6 Turbo 291 BHP 251 lbft @ 8psi - Retired due to rust and back at uni
View Worklog
Mx-3 2.5 V6 Turbo 291 BHP 251 lbft @ 8psi - Retired due to rust and back at uni
View Worklog
- AaronTietje
- Regular Member
- Posts: 1196
- Joined: August 21st, 2009, 5:24 pm
- antispam: No
- Location: Prattsburgh NY
Re: [FS] Euro mx3 breaking
Yes Aaron, and PM'dmarcdh wrote:AaronTietje wrote:
I didn't get the pm
We all want to be fast and look cool. Cool changes but fast never does.
- MrMazda92
- Supporting Member
- Posts: 5201
- Joined: October 8th, 2009, 5:35 pm
- antispam: No
- Location: Midwest
Re: [FS] Euro mx3 breaking
I'm still waiting for a quote on the bumper support as well.
Daily:
'12 Challenger R/T + STP - 3.92 w/ LSD, JG Cam, headers, SkipShift delete, Clutch Delay Valve delete, Hurst STS, RAM Clutch Adjuster, StopTech 6 Piston Brakes, Sticky Nittos, 435 WHP
Kid Hauler:
'08 Suburban LT 4WD - TVS 1900 Blower, LF SC Cam, headers, AFM delete, true 5" lift, 33x12s, 523 WHP
First Love:
'92 GS 5 spd - Straightneck KL/67mm TB, MegaSquirt/Coilpacks, 5 lugs/Speed6 brakes/FD wheels, wiretuck, coilovers, headers, AEM WB, Borla
Deleted: VAF/Power Steering/Air Conditioning/EGR/ABS/Auto Seatbelts/etc
'12 Challenger R/T + STP - 3.92 w/ LSD, JG Cam, headers, SkipShift delete, Clutch Delay Valve delete, Hurst STS, RAM Clutch Adjuster, StopTech 6 Piston Brakes, Sticky Nittos, 435 WHP
Kid Hauler:
'08 Suburban LT 4WD - TVS 1900 Blower, LF SC Cam, headers, AFM delete, true 5" lift, 33x12s, 523 WHP
First Love:
'92 GS 5 spd - Straightneck KL/67mm TB, MegaSquirt/Coilpacks, 5 lugs/Speed6 brakes/FD wheels, wiretuck, coilovers, headers, AEM WB, Borla
Deleted: VAF/Power Steering/Air Conditioning/EGR/ABS/Auto Seatbelts/etc
- marcdh
- Regular Member
- Posts: 1460
- Joined: July 26th, 2006, 3:54 pm
- Location: Belfast -Northern Ireland
- Contact:
Re: [FS] Euro mx3 breaking
Sorry guys, many excuses, work, college, working weekends and the online price finder being broken for days etc
Currently Josh has first refusal on the front bumper support and rear bumper cover.
FYI though:
approx £50 for surface mail (up to 8 weeks)
approx £60 for airmail (less than 7 days)
And then £20 for the actual part and packaging (took me an hour to wrap last time!)
However the online calculator is down on Royal Mail and Parcel Force at the moment. It's probably gone up a bit since then
Currently Josh has first refusal on the front bumper support and rear bumper cover.
FYI though:
Last time I shipped to Wyt it was:MrMazda92 wrote:I'm still waiting for a quote on the bumper support as well.
approx £50 for surface mail (up to 8 weeks)
approx £60 for airmail (less than 7 days)
And then £20 for the actual part and packaging (took me an hour to wrap last time!)
However the online calculator is down on Royal Mail and Parcel Force at the moment. It's probably gone up a bit since then
Sorry Aaron, wrong person! You can have the fogs, brackets, and some harness from the front, but currently Josh has first dibs on the support. I'll check their condition and photograph tonight if you like. Price for fogs, brackets, and some harness from the front will be no more than £25 plus post and probably less depending on condition.AaronTietje wrote:Yes Aaron, and PM'dmarcdh wrote:AaronTietje wrote:
I didn't get the pm
AZ-3 1498cc Turbo! EVO 8 turbo and manifold, 5 stud swap, SSR Type C, DIYPNP seq Megasquirt
Mx-3 2.5 V6 Turbo 291 BHP 251 lbft @ 8psi - Retired due to rust and back at uni
View Worklog
Mx-3 2.5 V6 Turbo 291 BHP 251 lbft @ 8psi - Retired due to rust and back at uni
View Worklog
- marcdh
- Regular Member
- Posts: 1460
- Joined: July 26th, 2006, 3:54 pm
- Location: Belfast -Northern Ireland
- Contact:
Re: [FS] Euro mx3 breaking
Clutch bits added:
As new throw out /clutch release bearing, genuine mazda part £25
As new Exedy/Daiken/OEM pressure plate £40
Exedy clutch Disc (had to clean up the splines) £20
Skimmed KF01 flywheel 16.8lbs- Machining cost £30, used for half a mile, yours with new high quality pilot bearing for £45
AZ-3 1498cc Turbo! EVO 8 turbo and manifold, 5 stud swap, SSR Type C, DIYPNP seq Megasquirt
Mx-3 2.5 V6 Turbo 291 BHP 251 lbft @ 8psi - Retired due to rust and back at uni
View Worklog
Mx-3 2.5 V6 Turbo 291 BHP 251 lbft @ 8psi - Retired due to rust and back at uni
View Worklog
-
- Regular Member
- Posts: 1523
- Joined: March 8th, 2010, 7:21 pm
- antispam: ~SPAM*SUX~
- Location: Canandaigua, NY
Re: [FS] Euro mx3 breaking
If I have some funds left over after the holidays I might bug you about that rear bumper...
92 GS gold (driver) worklog> http://mx-3.com/phpBB3/viewtopic.php?f=46&t=73405" onclick="window.open(this.href);return false;
93 GS red (wrecked)
I modify my ride so I can drive around the stupid people
93 GS red (wrecked)
I modify my ride so I can drive around the stupid people
-
- Senior Member
- Posts: 2165
- Joined: December 7th, 2002, 2:01 am
- Location: windsor, ontario
- Contact:
Re: [FS] Euro mx3 breaking
If the first buyer for the bumper backs out let me know!
ProjectMx
My BP and AWD build thread
Cardomain
93 Mx-3 GS with bp and GTR AWD system
93 Escort GT daily driving
My BP and AWD build thread
Cardomain
93 Mx-3 GS with bp and GTR AWD system
93 Escort GT daily driving
- mx-3_4evr
- Regular Member
- Posts: 609
- Joined: February 8th, 2008, 12:15 am
- Location: Burnsville,MN
- Contact:
Re: [FS] Euro mx3 breaking
I'm next on the whole front bumper assembly!