BP Swapped :D Still Wont start.. :( Suggestions.?

4-Cyl. Technical/Performance Discussions
resqrandy
Regular Member
Posts: 50
Joined: December 15th, 2009, 1:40 am
antispam: No
Location: Daytona, FL

Re: BP Swapped :D Still Wont start.. :( Suggestions.?

Post by resqrandy »

Will check in the morning thanks :D. But just to verify the ground wire will make the car pop spark but will not continue to run the same way an out of time would sound. ?
'99 F-150 Supercab Stock +Stereo System

'93 Mazda MX-3 1.8L BP05 5 Speed
Motor from '91 Mercury Tracer
ECU, Plug wires, fuel rail, Exhaust Manifold and Valve cover from '92 Protege
Wire harnes and VICS Solenoids from Escort GT
viewtopic.php?f=46&t=73674&p=548166#p548166
Photo Album:
http://www.facebook.com/album.php?aid=1 ... 711dabc18f
Dark_Rider2k3
Regular Member
Posts: 1603
Joined: March 6th, 2007, 1:17 pm
Location: Pittsburgh, Pennsylvania (USA)

Re: BP Swapped :D Still Wont start.. :( Suggestions.?

Post by Dark_Rider2k3 »

Image

FPR hooked up from return line (hooked up with a T, the one end from the fuel rail, other end connected to the return line, bottm end of the T hooked up to the FPR) with a drain line into a bucket.

(forgot to post this sorry)
resqrandy
Regular Member
Posts: 50
Joined: December 15th, 2009, 1:40 am
antispam: No
Location: Daytona, FL

Re: BP Swapped :D Still Wont start.. :( Suggestions.?

Post by resqrandy »

Hmmm
Last edited by resqrandy on April 25th, 2011, 11:26 pm, edited 1 time in total.
'99 F-150 Supercab Stock +Stereo System

'93 Mazda MX-3 1.8L BP05 5 Speed
Motor from '91 Mercury Tracer
ECU, Plug wires, fuel rail, Exhaust Manifold and Valve cover from '92 Protege
Wire harnes and VICS Solenoids from Escort GT
viewtopic.php?f=46&t=73674&p=548166#p548166
Photo Album:
http://www.facebook.com/album.php?aid=1 ... 711dabc18f
resqrandy
Regular Member
Posts: 50
Joined: December 15th, 2009, 1:40 am
antispam: No
Location: Daytona, FL

Re: BP Swapped :D Still Wont start.. :( Suggestions.?

Post by resqrandy »

Oh ok I gotcha. Thanks. did it sound bad and pop n back fire too? Sorry I mustve missed your first post for some reason.
'99 F-150 Supercab Stock +Stereo System

'93 Mazda MX-3 1.8L BP05 5 Speed
Motor from '91 Mercury Tracer
ECU, Plug wires, fuel rail, Exhaust Manifold and Valve cover from '92 Protege
Wire harnes and VICS Solenoids from Escort GT
viewtopic.php?f=46&t=73674&p=548166#p548166
Photo Album:
http://www.facebook.com/album.php?aid=1 ... 711dabc18f
resqrandy
Regular Member
Posts: 50
Joined: December 15th, 2009, 1:40 am
antispam: No
Location: Daytona, FL

Re: BP Swapped :D Still Wont start.. :( Suggestions.?

Post by resqrandy »

Dark_Rider2k3 wrote:
FPR hooked up from return line (hooked up with a T, the one end from the fuel rail, other end connected to the return line, bottm end of the T hooked up to the FPR) with a drain line into a bucket.

(forgot to post this sorry)
Image

Is this what you are talking about for the design. Cause Im missing something I think.
'99 F-150 Supercab Stock +Stereo System

'93 Mazda MX-3 1.8L BP05 5 Speed
Motor from '91 Mercury Tracer
ECU, Plug wires, fuel rail, Exhaust Manifold and Valve cover from '92 Protege
Wire harnes and VICS Solenoids from Escort GT
viewtopic.php?f=46&t=73674&p=548166#p548166
Photo Album:
http://www.facebook.com/album.php?aid=1 ... 711dabc18f
resqrandy
Regular Member
Posts: 50
Joined: December 15th, 2009, 1:40 am
antispam: No
Location: Daytona, FL

Re: BP Swapped :D Still Wont start.. :( Suggestions.?

Post by resqrandy »

Im sptting solid fuel from the return line to sputters.. Car wont start. Turning the distributor 180 makes it not do anything at all. Im so lost im about to get rid of this thing
'99 F-150 Supercab Stock +Stereo System

'93 Mazda MX-3 1.8L BP05 5 Speed
Motor from '91 Mercury Tracer
ECU, Plug wires, fuel rail, Exhaust Manifold and Valve cover from '92 Protege
Wire harnes and VICS Solenoids from Escort GT
viewtopic.php?f=46&t=73674&p=548166#p548166
Photo Album:
http://www.facebook.com/album.php?aid=1 ... 711dabc18f
User avatar
garren1138
Regular Member
Posts: 32
Joined: April 6th, 2008, 10:45 pm
Location: Portland, OR

Re: BP Swapped :D Still Wont start.. :( Suggestions.?

Post by garren1138 »

is your cam timing right?
resqrandy
Regular Member
Posts: 50
Joined: December 15th, 2009, 1:40 am
antispam: No
Location: Daytona, FL

Re: BP Swapped :D Still Wont start.. :( Suggestions.?

Post by resqrandy »

Woohoo!!! Its Purring like a kitten. I firgured it was something easy I was just missing and so I had a fresh set of eyes come check it out he's a Honda guy but a 4cyl guy none the less. He started from scratch and flipped the Rotor over so it's 180 out. Started up and purrs like a kitten. Thank you all for your help. I have a succesful BP Swap.!
'99 F-150 Supercab Stock +Stereo System

'93 Mazda MX-3 1.8L BP05 5 Speed
Motor from '91 Mercury Tracer
ECU, Plug wires, fuel rail, Exhaust Manifold and Valve cover from '92 Protege
Wire harnes and VICS Solenoids from Escort GT
viewtopic.php?f=46&t=73674&p=548166#p548166
Photo Album:
http://www.facebook.com/album.php?aid=1 ... 711dabc18f
User avatar
Jovian2k
Supporting Member
Posts: 851
Joined: June 3rd, 2004, 2:01 am
Location: La Prairie, QC + Stratford, CT

Re: BP Swapped :D Still Wont start.. :( Suggestions.?

Post by Jovian2k »

Glad you got it finished, must be exciting. I hope to be in your shoes in a week or so as mine comes to an end.
Image
1993 BlacknBronz RS BP-T/ MTX Swapped!
Worklog
For Sale Thread
resqrandy
Regular Member
Posts: 50
Joined: December 15th, 2009, 1:40 am
antispam: No
Location: Daytona, FL

Re: BP Swapped :D Still Wont start.. :( Suggestions.?

Post by resqrandy »

Its quite the relief. I already have a t3/t4 turbo to put on it. Its a Precision. Picked it up for only $80. LOL worth over $800 and not stolen :p
'99 F-150 Supercab Stock +Stereo System

'93 Mazda MX-3 1.8L BP05 5 Speed
Motor from '91 Mercury Tracer
ECU, Plug wires, fuel rail, Exhaust Manifold and Valve cover from '92 Protege
Wire harnes and VICS Solenoids from Escort GT
viewtopic.php?f=46&t=73674&p=548166#p548166
Photo Album:
http://www.facebook.com/album.php?aid=1 ... 711dabc18f
Post Reply

Return to “4-Cyl. Technical/Performance”