Looking To turbo my DOHC 1.8
-
- Junior Member
- Posts: 4
- Joined: June 27th, 2010, 1:35 pm
- antispam: ~SPAM*SUX~
Looking To turbo my DOHC 1.8
I'm plaining on installing a T3/T4 Turbo Charger on to my 1.8 DOHC MX3. Can my engine handle that the way it is or should I upgrade anything in the engine like the valves and cams. if so where can i get these parts? I'm also having a hard time finding a turbo manifold and downpipe.
- ice_mann
- Regular Member
- Posts: 142
- Joined: February 15th, 2010, 2:22 pm
- antispam: No
- Location: Woodstock, NB Canada
Re: Looking To turbo my DOHC 1.8
You should check the FAQ's and use the search function, theres countless posts on the subject...
95 MX3 GSZE- Silver, TWM STS, suspension techniques lowering springs, moroe struts, bronze-oil shifter bushings, leather MS shift knob, strut bars(Fleabay), ss headers, spec stage 3 clutch, fidanza flywheel , outlaw spacers, MS motor mounts , custom ss door sills, spyder projectors
WTB
coilovers
Megasquirt(dont know which one yet)
Slim Fans
WTB
coilovers
Megasquirt(dont know which one yet)
Slim Fans
- RS_OBD'oh_2
- Senior Member
- Posts: 2400
- Joined: April 9th, 2007, 1:26 pm
- Location: Calgary, AB
Re: Looking To turbo my DOHC 1.8
if you've upgraded to the 1.8BP, (from the 1.6b6) read mike's worklog. T3/t4 may not be your best choice, start with the manifold then go from there.
-
- Junior Member
- Posts: 4
- Joined: June 27th, 2010, 1:35 pm
- antispam: ~SPAM*SUX~
Re: Looking To turbo my DOHC 1.8
I haven't been having much luck finding that information on here. That is why I am asking. There is stuff about turbos but nothing about what I wanna know.
-
- Regular Member
- Posts: 363
- Joined: May 19th, 2008, 3:54 pm
- Location: Ravensdale WA 98051
- Contact:
Re: Looking To turbo my DOHC 1.8
The BP is a pretty stout engine, even with stock internals. It should be able to handle 7-8 pounds of boost without any issues. T3/T4 would probably be overkill though.
Upgraded internals are needed/recommended for any real power.
The manifold will more than likely have to be custom made. There may be some in the for sale section.
http://www.mx-3.com/phpBB3/viewtopic.ph ... urbo+boost" onclick="window.open(this.href);return false;
http://www.mx-3.com/phpBB3/viewtopic.ph ... urbo+boost" onclick="window.open(this.href);return false;
Upgraded internals are needed/recommended for any real power.
The manifold will more than likely have to be custom made. There may be some in the for sale section.
http://www.mx-3.com/phpBB3/viewtopic.ph ... urbo+boost" onclick="window.open(this.href);return false;
http://www.mx-3.com/phpBB3/viewtopic.ph ... urbo+boost" onclick="window.open(this.href);return false;
Wings on an MX3? What are you thinking?
92 RS BP05
93 GS KLZE
(Previously owned by 2Fazed and then mrMazda92)
92 RS BP05
93 GS KLZE
(Previously owned by 2Fazed and then mrMazda92)
- RS_OBD'oh_2
- Senior Member
- Posts: 2400
- Joined: April 9th, 2007, 1:26 pm
- Location: Calgary, AB
Re: Looking To turbo my DOHC 1.8
edt racing makes the bp turbo mani. I believe it bolts to a gt25/28 frame. What clutch are you running in the bp? If you have not upgraded it, you should do so first. Stock b6/bp are good for 200-250 in stock form... IFFFFFF it has a good tune.
-
- Junior Member
- Posts: 4
- Joined: June 27th, 2010, 1:35 pm
- antispam: ~SPAM*SUX~
Re: Looking To turbo my DOHC 1.8
The only thing that is done to the tranny is the Clutch. it came with it so I'm not sure what kind but its not stock. It grips like a racing clutch.
- Limegreen mx-3
- Regular Member
- Posts: 1778
- Joined: October 29th, 2002, 2:01 am
- Location: San Antonio TX
- Contact:
Re: Looking To turbo my DOHC 1.8
T3/t4 is not over kill given to do a decent turbo setup, engine management is the key. If your not wiling to do neither, because it isn't cheap than yes wanting to install a t3/t4 turbo is over kill.
What are your power goals if your thinking spending 500 bucks will get you in turbo form, your better off all motor.
What are your power goals if your thinking spending 500 bucks will get you in turbo form, your better off all motor.
(12.4@118@18psi) 92 MX-3, KIA (BP-DE)Swap, Electromotive TEC II Standalone, 8,200 Rev Limit, Custom Intake/Exhaust Manifold, 1,000cc PTE Injectors, Custom Fuel Rail, Aeromotive FPR, 80MM Holley TB, MSD 8.5MM Wires, NGK V-Power #8, SC6262 Turbo, 3 in. DownPipe, Tial WG/BOV, 600HP PTE FMIC, 2.5IN Intercooler Piping, EQUUS/Autometer KIA G-Series Tran, Extreme ACT Clutch, Built BP in starting process.
-
- Junior Member
- Posts: 4
- Joined: June 27th, 2010, 1:35 pm
- antispam: ~SPAM*SUX~
Re: Looking To turbo my DOHC 1.8
I have been looking around for valve and cam upgrades. anyone know where I can Possibly find those online?
Re: Looking To turbo my DOHC 1.8
I find RS oh to be very helpful
To answer hardshitters question, supertect makes parts for the engine. Belfab products. Eagle I believe. There's one more company that I kno of I think wiseco (sp)
To answer hardshitters question, supertect makes parts for the engine. Belfab products. Eagle I believe. There's one more company that I kno of I think wiseco (sp)