Intake Suggestions

[Letters11]

Im looking to get an intake for my 1995 1.6 dohc. I know there are thousands of posts on this but I have searched for the past few days and havent had my questions really answered. I noticed that I could possibly use an integra intake with some modification. Some of them that ive seen only have one nipple for a hose as well as no opening for my MAF. Im assuming that I will need to cut it somewhere for this to fit? Anyway, what would your advice be for these intakes. Thanks

http://cgi.ebay.com/ebaymotors/FALKEN-C ... ccessories" onclick="window.open(this.href);return false;

http://cgi.ebay.com/ebaymotors/94-01-AC ... 190wt_1160" onclick="window.open(this.href);return false;

http://cgi.ebay.com/ebaymotors/94-95-97 ... 3379wt_911" onclick="window.open(this.href);return false;

or none of the above?

[umcamara]

Why did you make two of the same posts? It's annoying... delete one.

Anyhow, I'm looking at doing this soon as well. I'm a '96 B6DE, so same thing. There are Integra kits with 2 or 3 nipples. Keep lookin... And don't forget you can always add nipples if you need, or just use breathers on the hoses..

[RS_OBD'oh_2]

this is done to death!!!
Please search again.
None of those are any good.
You need 3 nipples for the best fit, they will also need to be located near the elbow off the TB. I don't understand what you are saying about the MAF.... you don't need a hole for it... it fits in line... being the CAI is a pipe... the entire thing is a hole and you can just get a rubber coupler and poof.

A Probe GT short ram could work as well. will need some modifications and some extra rubber couplers

http://cgi.ebay.com/ebaymotors/1993-199 ... 27b0cecf15" onclick="window.open(this.href);return false;

maf would go just after the filter

[Letters11]

Why did you make two of the same posts? It's annoying... delete one.

Anyhow, I'm looking at doing this soon as well. I'm a '96 B6DE, so same thing. There are Integra kits with 2 or 3 nipples. Keep lookin... And don't forget you can always add nipples if you need, or just use breathers on the hoses..

I did not purposely post up 2 of the same ones. OOOOPPPPPS. Ill see what else i can find

[Letters11]

this is done to death!!!
Please search again.
None of those are any good.
You need 3 nipples for the best fit, they will also need to be located near the elbow off the TB. I don't understand what you are saying about the MAF.... you don't need a hole for it... it fits in line... being the CAI is a pipe... the entire thing is a hole and you can just get a rubber coupler and poof.

A Probe GT short ram could work as well. will need some modifications and some extra rubber couplers

http://cgi.ebay.com/ebaymotors/1993-199 ... 27b0cecf15" onclick="window.open(this.href);return false;

maf would go just after the filter

OOO i gotcha now, I was unsure of the placement of the MAF. What other couplers would i need as well as the modification? Ill search again and see what i can find a second time. thanks

[RS_OBD'oh_2]

I don't know.. get a tape and measure the maf, the filter, the intake pipe. You may have to wait till it arrives to do this. Not really complicated.

[Letters11]

this is done to death!!!
Please search again.
None of those are any good.
You need 3 nipples for the best fit, they will also need to be located near the elbow off the TB. I don't understand what you are saying about the MAF.... you don't need a hole for it... it fits in line... being the CAI is a pipe... the entire thing is a hole and you can just get a rubber coupler and poof.

A Probe GT short ram could work as well. will need some modifications and some extra rubber couplers

http://cgi.ebay.com/ebaymotors/1993-199 ... 27b0cecf15" onclick="window.open(this.href);return false;

maf would go just after the filter

With this intake will I keep the acordian looking pipe in the beginning? Like this one http://cgi.ebay.com/ebaymotors/93-94-95 ... ccessories" onclick="window.open(this.href);return false;

sorry for all the questions, Just making sure
thanks alot

[RS_OBD'oh_2]

Really?

Anything can be done, up to you.

[Letters11]

How about these ones?! They look similar to the probe ones

http://cgi.ebay.com/ebaymotors/99-00-HO ... ccessories" onclick="window.open(this.href);return false;

http://cgi.ebay.com/ebaymotors/99-00-Ho ... ccessories" onclick="window.open(this.href);return false;

[RS_OBD'oh_2]

looks like it does not have enough of a bend.. but for under 20.00 just try it. Not a loss if you have to buy a few.

[Letters11]

looks like it does not have enough of a bend.. but for under 20.00 just try it. Not a loss if you have to buy a few.

Yea I was afraid of the bend problem