Intake Suggestions
Intake Suggestions
Im looking to get an intake for my 1995 1.6 dohc. I know there are thousands of posts on this but I have searched for the past few days and havent had my questions really answered. I noticed that I could possibly use an integra intake with some modification. Some of them that ive seen only have one nipple for a hose as well as no opening for my MAF. Im assuming that I will need to cut it somewhere for this to fit? Anyway, what would your advice be for these intakes. Thanks
http://cgi.ebay.com/ebaymotors/FALKEN-C ... ccessories" onclick="window.open(this.href);return false;
http://cgi.ebay.com/ebaymotors/94-01-AC ... 190wt_1160" onclick="window.open(this.href);return false;
http://cgi.ebay.com/ebaymotors/94-95-97 ... 3379wt_911" onclick="window.open(this.href);return false;
or none of the above?
http://cgi.ebay.com/ebaymotors/FALKEN-C ... ccessories" onclick="window.open(this.href);return false;
http://cgi.ebay.com/ebaymotors/94-01-AC ... 190wt_1160" onclick="window.open(this.href);return false;
http://cgi.ebay.com/ebaymotors/94-95-97 ... 3379wt_911" onclick="window.open(this.href);return false;
or none of the above?
- umcamara
- Supporting Member
- Posts: 1892
- Joined: June 12th, 2007, 3:15 am
- antispam: No
- Location: Winnipeg, Manitoba, Canada
Re: Intake Suggestions
Why did you make two of the same posts? It's annoying... delete one.
Anyhow, I'm looking at doing this soon as well. I'm a '96 B6DE, so same thing. There are Integra kits with 2 or 3 nipples. Keep lookin... And don't forget you can always add nipples if you need, or just use breathers on the hoses..
Anyhow, I'm looking at doing this soon as well. I'm a '96 B6DE, so same thing. There are Integra kits with 2 or 3 nipples. Keep lookin... And don't forget you can always add nipples if you need, or just use breathers on the hoses..
- RS_OBD'oh_2
- Senior Member
- Posts: 2400
- Joined: April 9th, 2007, 1:26 pm
- Location: Calgary, AB
Re: Intake Suggestions
this is done to death!!!
Please search again.
None of those are any good.
You need 3 nipples for the best fit, they will also need to be located near the elbow off the TB. I don't understand what you are saying about the MAF.... you don't need a hole for it... it fits in line... being the CAI is a pipe... the entire thing is a hole and you can just get a rubber coupler and poof.
A Probe GT short ram could work as well. will need some modifications and some extra rubber couplers
http://cgi.ebay.com/ebaymotors/1993-199 ... 27b0cecf15" onclick="window.open(this.href);return false;
maf would go just after the filter
Please search again.
None of those are any good.
You need 3 nipples for the best fit, they will also need to be located near the elbow off the TB. I don't understand what you are saying about the MAF.... you don't need a hole for it... it fits in line... being the CAI is a pipe... the entire thing is a hole and you can just get a rubber coupler and poof.
A Probe GT short ram could work as well. will need some modifications and some extra rubber couplers
http://cgi.ebay.com/ebaymotors/1993-199 ... 27b0cecf15" onclick="window.open(this.href);return false;
maf would go just after the filter
Re: Intake Suggestions
I did not purposely post up 2 of the same ones. OOOOPPPPPS. Ill see what else i can findumcamara wrote:Why did you make two of the same posts? It's annoying... delete one.
Anyhow, I'm looking at doing this soon as well. I'm a '96 B6DE, so same thing. There are Integra kits with 2 or 3 nipples. Keep lookin... And don't forget you can always add nipples if you need, or just use breathers on the hoses..
Re: Intake Suggestions
OOO i gotcha now, I was unsure of the placement of the MAF. What other couplers would i need as well as the modification? Ill search again and see what i can find a second time. thanksRS_OBD'oh_2 wrote:this is done to death!!!
Please search again.
None of those are any good.
You need 3 nipples for the best fit, they will also need to be located near the elbow off the TB. I don't understand what you are saying about the MAF.... you don't need a hole for it... it fits in line... being the CAI is a pipe... the entire thing is a hole and you can just get a rubber coupler and poof.
A Probe GT short ram could work as well. will need some modifications and some extra rubber couplers
http://cgi.ebay.com/ebaymotors/1993-199 ... 27b0cecf15" onclick="window.open(this.href);return false;
maf would go just after the filter
- RS_OBD'oh_2
- Senior Member
- Posts: 2400
- Joined: April 9th, 2007, 1:26 pm
- Location: Calgary, AB
Re: Intake Suggestions
I don't know.. get a tape and measure the maf, the filter, the intake pipe. You may have to wait till it arrives to do this. Not really complicated.
Re: Intake Suggestions
With this intake will I keep the acordian looking pipe in the beginning? Like this one http://cgi.ebay.com/ebaymotors/93-94-95 ... ccessories" onclick="window.open(this.href);return false;RS_OBD'oh_2 wrote:this is done to death!!!
Please search again.
None of those are any good.
You need 3 nipples for the best fit, they will also need to be located near the elbow off the TB. I don't understand what you are saying about the MAF.... you don't need a hole for it... it fits in line... being the CAI is a pipe... the entire thing is a hole and you can just get a rubber coupler and poof.
A Probe GT short ram could work as well. will need some modifications and some extra rubber couplers
http://cgi.ebay.com/ebaymotors/1993-199 ... 27b0cecf15" onclick="window.open(this.href);return false;
maf would go just after the filter
sorry for all the questions, Just making sure
thanks alot
- RS_OBD'oh_2
- Senior Member
- Posts: 2400
- Joined: April 9th, 2007, 1:26 pm
- Location: Calgary, AB
Re: Intake Suggestions
Really?
Anything can be done, up to you.
Anything can be done, up to you.
Re: Intake Suggestions
How about these ones?! They look similar to the probe ones
http://cgi.ebay.com/ebaymotors/99-00-HO ... ccessories" onclick="window.open(this.href);return false;
http://cgi.ebay.com/ebaymotors/99-00-Ho ... ccessories" onclick="window.open(this.href);return false;
http://cgi.ebay.com/ebaymotors/99-00-HO ... ccessories" onclick="window.open(this.href);return false;
http://cgi.ebay.com/ebaymotors/99-00-Ho ... ccessories" onclick="window.open(this.href);return false;
- RS_OBD'oh_2
- Senior Member
- Posts: 2400
- Joined: April 9th, 2007, 1:26 pm
- Location: Calgary, AB
Re: Intake Suggestions
looks like it does not have enough of a bend.. but for under 20.00 just try it. Not a loss if you have to buy a few.
Re: Intake Suggestions
Yea I was afraid of the bend problemRS_OBD'oh_2 wrote:looks like it does not have enough of a bend.. but for under 20.00 just try it. Not a loss if you have to buy a few.