calling out the corksport guys! let's get some mx-3 exhausts
-
- Regular Member
- Posts: 55
- Joined: August 2nd, 2005, 12:50 pm
- Location: Vancouver, WA
- Contact:
Re: calling out the corksport guys! let's get some mx-3 exha
We had tossed around the idea a while back of making an exhaust system for the Mx3 but we could not get enough interest. A guesstimate if we were to build a system would be the $399-$439 range.
-Derrick
-Derrick
http://www.corksport.com for all your Mazda needs.
Re: calling out the corksport guys! let's get some mx-3 exha
this is actually a good price.
-
- Regular Member
- Posts: 1603
- Joined: March 6th, 2007, 1:17 pm
- Location: Pittsburgh, Pennsylvania (USA)
Re: calling out the corksport guys! let's get some mx-3 exha
I agree
Any specs on the exhaust if you were to make it? I'd actually be interested pending a sound clip. Mine sounds terrible.
Any specs on the exhaust if you were to make it? I'd actually be interested pending a sound clip. Mine sounds terrible.
Re: calling out the corksport guys! let's get some mx-3 exha
I would be very interested in a cat back exhaust, especially from CS. maybe include a high-flow cat, for us that still want to pass emissions.
- umcamara
- Supporting Member
- Posts: 1892
- Joined: June 12th, 2007, 3:15 am
- antispam: No
- Location: Winnipeg, Manitoba, Canada
Re: calling out the corksport guys! let's get some mx-3 exha
Only problem is the OP claimed that the system could be universal. Pretty sure V6 and 4 cylinder guys would not want to run the same diameter exhaust.
-
- Regular Member
- Posts: 1603
- Joined: March 6th, 2007, 1:17 pm
- Location: Pittsburgh, Pennsylvania (USA)
Re: calling out the corksport guys! let's get some mx-3 exha
either that, or just have the piping..pdulaney wrote:I would be very interested in a cat back exhaust, especially from CS. maybe include a high-flow cat, for us that still want to pass emissions.
but yeah I know I'm getting a high-flow cat. Magnaflow makes one for our car that I might get.
Re: calling out the corksport guys! let's get some mx-3 exha
I know of at least 1 1st gen protege, and an escort gt running one of these piping kits. Cant see the MX-3 being so much different that one of these pipe kits couldnt be used. Just go buy a nice high flow cat, long resonator, and a chambered muffler, youll be all set.Dark_Rider2k3 wrote:either that, or just have the piping..pdulaney wrote:I would be very interested in a cat back exhaust, especially from CS. maybe include a high-flow cat, for us that still want to pass emissions.
but yeah I know I'm getting a high-flow cat. Magnaflow makes one for our car that I might get.
I mean, the 3" stainless steel set is only $270 + $20 shipping.
http://www.trubendz.com/home.asp?produc ... ype=main12" onclick="window.open(this.href);return false;
Took the bp+t out of the mx and swapped it into a 95 escort wagon.
- MapaX5
- Regular Member
- Posts: 187
- Joined: July 9th, 2009, 10:09 am
- antispam: No
- Location: Hernando/Ocala/Tampa, FL
- Contact:
Re: calling out the corksport guys! let's get some mx-3 exha
No no no, wat I meant was the fact that the bends would be similar, but the diameter could be different. I don't see much need for a 3" exhaust on a car. Unless you've got a turbo, and in that case, you probably already have an exhaust.
Now, v6 sounds pretty decent with 2.5", and they can offer a silencer for the i4 (like they do on their drift exhaust kit) if needed.
Now, v6 sounds pretty decent with 2.5", and they can offer a silencer for the i4 (like they do on their drift exhaust kit) if needed.
'91 MX-5 with plenty of mods, '94 DOHC MX-3__HP Design muffler, glasspack, custom intake (superk's idea), KYB GR-2 shocks, projector headlights, GS front end, Rear Disc brake conversion, swaybar and tie bar, and lip spoiler, JDM mazdaspeed full-length side skirts,
- Mx3TD
- Regular Member
- Posts: 67
- Joined: February 23rd, 2010, 12:20 am
- antispam: No
- Location: Layton,Ut.
- Contact:
Re: calling out the corksport guys! let's get some mx-3 exha
i would be way interested. im actually going to start looking for the mean dual exhaust kinda thing that i have seen on almost all of the ZE's.
1992 MX3, RS..Sanded... Short shifter,Seat Covers;) , Fart can that sounds decent (:
1992 MX3, GS. Lowered, 18in. chrome rims., Blacked out Tails, Weird Bodykit.
1992 MX3, GS. Lowered, 18in. chrome rims., Blacked out Tails, Weird Bodykit.
- mazda915
- Regular Member
- Posts: 223
- Joined: November 10th, 2008, 1:10 pm
- Location: el PASO Texas
- Contact:
Re: calling out the corksport guys! let's get some mx-3 exha
im down to get this set up exhaust from corksport , i bought some performance part from there and i enjoy the products .
1992 gs k8ze . 4 inch tip 2.5 cat , cold air intake ,corksport front and rear stut bars home made upper pillar bar , prosport gauges,megan racing 4 pts harnest, 10,000 K HID's , ksport suspension ,
- Cpl_Bryant
- Regular Member
- Posts: 209
- Joined: April 1st, 2005, 10:41 am
- Location: Albany, NY
- Contact:
Re: calling out the corksport guys! let's get some mx-3 exha
So, I swapped in the BPT, but this still might apply to some extent. I have the PowerSeries catback exhaust for the 90-94 Protege from Corksport. It had to be cut at the end and custom fitted to the downpipe/cat, but from there back, it follows the same route.
http://www.cardomain.com/profile/cplbryant" onclick="window.open(this.href);return false;
Re: calling out the corksport guys! let's get some mx-3 exha
somethin low key not too loud not rice but 2.25+ wuld be awesome.
with an option for 2.75+ for turbo.
300-500 bucks.
with an option for 2.75+ for turbo.
300-500 bucks.
Re: calling out the corksport guys! let's get some mx-3 exha
In all honesty most here don't have the money to spend on a custom made exhaust and that's just the reality. $400 doesn't include shipping so now we're up to $600, not installed. I can buy the cat, resonator and muffler and have them installed for a total out lay of about $450. You still might need a cross over pipe or headers if yours are old so add from $180 to $300. Oh and we might as well do new O2 sensors as well. Bottom line is, most people will piece meal an exhaust together. I can understand Corksport bailing on this.
2004 Subaru WRX Silver, stage 2, minty interior.
2002 Subaru WRX Blue, SOLD (best E test numbers I've ever seen)
94 MX-6. Sold
92 GS KLZE 5 Speed
96 GS 5 speed, KLZE, Sold
95 GS Minty Shape Sold
92 GS Sold
92 GS Parts Car scrapped.
Feedback viewtopic.php?f=37&t=66348" onclick="window.open(this.href);return false;
7477th member.
I know you believe that you understand what you think I said but I'm sure you realize that what you heard is not what I meant.
2002 Subaru WRX Blue, SOLD (best E test numbers I've ever seen)
94 MX-6. Sold
92 GS KLZE 5 Speed
96 GS 5 speed, KLZE, Sold
95 GS Minty Shape Sold
92 GS Sold
92 GS Parts Car scrapped.
Feedback viewtopic.php?f=37&t=66348" onclick="window.open(this.href);return false;
7477th member.
I know you believe that you understand what you think I said but I'm sure you realize that what you heard is not what I meant.
- RS_OBD'oh_2
- Senior Member
- Posts: 2400
- Joined: April 9th, 2007, 1:26 pm
- Location: Calgary, AB
Re: calling out the corksport guys! let's get some mx-3 exha
You seem to have issues find old topics today. CS will no longer be supporting the MX3. They will be phasing us out very soon. So.... moot.... That's kinda what you get when you bring up old topics.crazchino wrote:somethin low key not too loud not rice but 2.25+ wuld be awesome.
with an option for 2.75+ for turbo.
300-500 bucks.