calling out the corksport guys! let's get some mx-3 exhausts
- MapaX5
- Regular Member
- Posts: 187
- Joined: July 9th, 2009, 10:09 am
- antispam: No
- Location: Hernando/Ocala/Tampa, FL
- Contact:
calling out the corksport guys! let's get some mx-3 exhausts
Hey guys, this is directed towards corksport DIRECTLY.
i have been an avid buyer of all your products, and have to say your customer service is EXCELENT.
now, my only beef...
Where is the mx-3 cat-back exhaust???! lol
i know i've spoken with Derek (pardon if i mispelled it) and he said they might if there is enough interest.
So....i suggest, we start a thread to see if there is enough interest.
i didn't do it on the FS or WTB sections because i'm not either selling nor buying.
So...
here's my suggestion....
i have the drift exhaust on my miata and LOVE IT.
is there any way yall could come up with a kit like it for the mx-3s?
i'm sure most of us are tired of our stock exhaust (if any of us have one anymore), and would like an actual mod from you guys.
hopefully in two different versions...
Stainless Steel for the ones with $$$, and anything else for the rest of us.
Any ideas?
guys, let's post and get some exhausts built!
i have been an avid buyer of all your products, and have to say your customer service is EXCELENT.
now, my only beef...
Where is the mx-3 cat-back exhaust???! lol
i know i've spoken with Derek (pardon if i mispelled it) and he said they might if there is enough interest.
So....i suggest, we start a thread to see if there is enough interest.
i didn't do it on the FS or WTB sections because i'm not either selling nor buying.
So...
here's my suggestion....
i have the drift exhaust on my miata and LOVE IT.
is there any way yall could come up with a kit like it for the mx-3s?
i'm sure most of us are tired of our stock exhaust (if any of us have one anymore), and would like an actual mod from you guys.
hopefully in two different versions...
Stainless Steel for the ones with $$$, and anything else for the rest of us.
Any ideas?
guys, let's post and get some exhausts built!
Last edited by MapaX5 on March 12th, 2010, 11:14 pm, edited 1 time in total.
'91 MX-5 with plenty of mods, '94 DOHC MX-3__HP Design muffler, glasspack, custom intake (superk's idea), KYB GR-2 shocks, projector headlights, GS front end, Rear Disc brake conversion, swaybar and tie bar, and lip spoiler, JDM mazdaspeed full-length side skirts,
- Evo_Spec
- Senior Member
- Posts: 2504
- Joined: December 30th, 2008, 3:41 am
- Location: Calgary, Alberta, Canada
Re: calling out the corksport guys!!!
my only thing is price, CS stuff can be pricey, but i would love an exhaust system.
my price range is like 500 bux if that helps this topic at all
my price range is like 500 bux if that helps this topic at all
- MapaX5
- Regular Member
- Posts: 187
- Joined: July 9th, 2009, 10:09 am
- antispam: No
- Location: Hernando/Ocala/Tampa, FL
- Contact:
Re: calling out the corksport guys!!!
i was hoping $200~ for steel, $300~ for stainless. their drift exhaust for the miata is only $350...
and it's much more complicated, in my opinion. mx-3s are pretty straight. miatas take a lot of turns and bends. although for $300 flat, it would be a killer system.... (free for the one who brought up the idea?
)
and it's much more complicated, in my opinion. mx-3s are pretty straight. miatas take a lot of turns and bends. although for $300 flat, it would be a killer system.... (free for the one who brought up the idea?
![Love :love:](./images/smilies/love.gif)
'91 MX-5 with plenty of mods, '94 DOHC MX-3__HP Design muffler, glasspack, custom intake (superk's idea), KYB GR-2 shocks, projector headlights, GS front end, Rear Disc brake conversion, swaybar and tie bar, and lip spoiler, JDM mazdaspeed full-length side skirts,
- umcamara
- Supporting Member
- Posts: 1892
- Joined: June 12th, 2007, 3:15 am
- antispam: No
- Location: Winnipeg, Manitoba, Canada
Re: calling out the corksport guys!!!
There's also a much larger market base for Miata parts, so they can afford to sell at those prices. They likely figure it's not worth the R & D for the few people who may buy it.MapaX5 wrote:i was hoping $200~ for steel, $300~ for stainless. their drift exhaust for the miata is only $350...
and it's much more complicated, in my opinion. mx-3s are pretty straight. miatas take a lot of turns and bends. although for $300 flat, it would be a killer system.... (free for the one who brought up the idea?)
That being said... I'd be interested.
- MapaX5
- Regular Member
- Posts: 187
- Joined: July 9th, 2009, 10:09 am
- antispam: No
- Location: Hernando/Ocala/Tampa, FL
- Contact:
Re: calling out the corksport guys!!!
ditto, but corksport would be THE ONLY ONE to sell it!
i pride myself everytime someone has a mazda part related question, and all i gotta do is call them, and they always have what the person is looking for. i feel so bad for them though, i call like once a week. lol.
but, like RE-amemiya, taking pride in being THE ONLY ONE to offer a mazda product might persuade them into making this?
besides, i'm sure we can come up with at least 5! that alone would be like $1500. granted they spend some of that in the initial runs, but they retain the knowledge and can offer it.
and since the v6 and i4 exhaust don't differ much, it'll be a one fits all. so win-win.
i pride myself everytime someone has a mazda part related question, and all i gotta do is call them, and they always have what the person is looking for. i feel so bad for them though, i call like once a week. lol.
but, like RE-amemiya, taking pride in being THE ONLY ONE to offer a mazda product might persuade them into making this?
besides, i'm sure we can come up with at least 5! that alone would be like $1500. granted they spend some of that in the initial runs, but they retain the knowledge and can offer it.
and since the v6 and i4 exhaust don't differ much, it'll be a one fits all. so win-win.
'91 MX-5 with plenty of mods, '94 DOHC MX-3__HP Design muffler, glasspack, custom intake (superk's idea), KYB GR-2 shocks, projector headlights, GS front end, Rear Disc brake conversion, swaybar and tie bar, and lip spoiler, JDM mazdaspeed full-length side skirts,
-
- Regular Member
- Posts: 1603
- Joined: March 6th, 2007, 1:17 pm
- Location: Pittsburgh, Pennsylvania (USA)
Re: calling out the corksport guys!!!
holy crap YES! Let's get a group buy going!
Re: calling out the corksport guys!!!
For $500 you can bring your car to an exhaust shop and have them do a custom one off exhaust. Its not like our cars need to be re-tuned after for flow or something.Evo_Spec wrote:my only thing is price, CS stuff can be pricey, but i would love an exhaust system.
my price range is like 500 bux if that helps this topic at all
Took the bp+t out of the mx and swapped it into a 95 escort wagon. ![Wink ;)](./images/smilies/icon_wink.gif)
![Wink ;)](./images/smilies/icon_wink.gif)
-
- Regular Member
- Posts: 1603
- Joined: March 6th, 2007, 1:17 pm
- Location: Pittsburgh, Pennsylvania (USA)
Re: calling out the corksport guys! let's get some mx-3 exha
my issue is how loud a custom exhaust sounds.. I'm afraid to think of what it sounds with my BP in..
-
- Forum Moderator
- Posts: 3415
- Joined: September 3rd, 2002, 2:01 am
- Location: Eastern Hemisphere
- Contact:
Re: calling out the corksport guys! let's get some mx-3 exha
you can get your exhaust shop to help you out with suggestions on making it quiet but still retaining the increased flow.
08 Infiniti G37s 6speed (The Daily)
Stillen Cold Air Intake, Z1 Plenum Power Mod, Z1 Headers, Z1 Test Pipe, OBX (Ark) Exhaust, Up-Rev Osiris Engine Management (Tuned at Z1), 20x9" 20x10" Str Racing Concave Staggered Rims, SPC Camber kit, Tein H Techs Springs
01 Lexus Is300 (LS2 Project)
93 Mx3 SE 2.5 KLZE (sold it)
93 Mx3 GS 2.0 KFZE (killed it)
Stillen Cold Air Intake, Z1 Plenum Power Mod, Z1 Headers, Z1 Test Pipe, OBX (Ark) Exhaust, Up-Rev Osiris Engine Management (Tuned at Z1), 20x9" 20x10" Str Racing Concave Staggered Rims, SPC Camber kit, Tein H Techs Springs
01 Lexus Is300 (LS2 Project)
93 Mx3 SE 2.5 KLZE (sold it)
93 Mx3 GS 2.0 KFZE (killed it)
Re: calling out the corksport guys! let's get some mx-3 exha
One word, Magnaflow. Buy their cat, resonator and muffler and your gold. I advise you buy the longest resonator you can, probably the 17" as it gets a little noisy. I had a Magnaflow on my last MX-3 and I loved the sound and now my entire system is Magnaflow. I do plan to install a longer resonator as the short 12" one tends to drone a certain rpm's.
2004 Subaru WRX Silver, stage 2, minty interior.
2002 Subaru WRX Blue, SOLD (best E test numbers I've ever seen)
94 MX-6. Sold
92 GS KLZE 5 Speed
96 GS 5 speed, KLZE, Sold
95 GS Minty Shape Sold
92 GS Sold
92 GS Parts Car scrapped.
Feedback viewtopic.php?f=37&t=66348" onclick="window.open(this.href);return false;
7477th member.
I know you believe that you understand what you think I said but I'm sure you realize that what you heard is not what I meant.
2002 Subaru WRX Blue, SOLD (best E test numbers I've ever seen)
94 MX-6. Sold
92 GS KLZE 5 Speed
96 GS 5 speed, KLZE, Sold
95 GS Minty Shape Sold
92 GS Sold
92 GS Parts Car scrapped.
Feedback viewtopic.php?f=37&t=66348" onclick="window.open(this.href);return false;
7477th member.
I know you believe that you understand what you think I said but I'm sure you realize that what you heard is not what I meant.
- Evo_Spec
- Senior Member
- Posts: 2504
- Joined: December 30th, 2008, 3:41 am
- Location: Calgary, Alberta, Canada
Re: calling out the corksport guys! let's get some mx-3 exha
didn't know i could get a custom one done for 500 dollers, i always hear people saying their exhausts costed around 1k so i assumed it was around that to get a custom one.
If this gets done i would FOR SURE be interested
If this gets done i would FOR SURE be interested
Re: calling out the corksport guys! let's get some mx-3 exha
A local muffler shop here quoted me $300 to mandrel bend an exhaust to fit for labor. So, $300 + cost of muffler, resonator, and cat. Shouldnt be more then $500 total.
Took the bp+t out of the mx and swapped it into a 95 escort wagon. ![Wink ;)](./images/smilies/icon_wink.gif)
![Wink ;)](./images/smilies/icon_wink.gif)
- umcamara
- Supporting Member
- Posts: 1892
- Joined: June 12th, 2007, 3:15 am
- antispam: No
- Location: Winnipeg, Manitoba, Canada
Re: calling out the corksport guys! let's get some mx-3 exha
Never heard of a local muffler shop having a mandrel... Cool.pox wrote:A local muffler shop here quoted me $300 to mandrel bend an exhaust to fit for labor. So, $300 + cost of muffler, resonator, and cat. Shouldnt be more then $500 total.
- MapaX5
- Regular Member
- Posts: 187
- Joined: July 9th, 2009, 10:09 am
- antispam: No
- Location: Hernando/Ocala/Tampa, FL
- Contact:
Re: calling out the corksport guys! let's get some mx-3 exha
guys, can we stay on topic please?
and on the other note, local shop with mandrel mend?? wow. never heard of THAT before.
and on the other note, local shop with mandrel mend?? wow. never heard of THAT before.
'91 MX-5 with plenty of mods, '94 DOHC MX-3__HP Design muffler, glasspack, custom intake (superk's idea), KYB GR-2 shocks, projector headlights, GS front end, Rear Disc brake conversion, swaybar and tie bar, and lip spoiler, JDM mazdaspeed full-length side skirts,
-
- Regular Member
- Posts: 1603
- Joined: March 6th, 2007, 1:17 pm
- Location: Pittsburgh, Pennsylvania (USA)
Re: calling out the corksport guys! let's get some mx-3 exha
that is pretty awesome. I'm going to have to look around my area at different shops.. get some good quotes going for stainless...