tranny question

Berbz · Post by **Berbz** » March 3rd, 2010, 12:59 am

ok so i heard that some automatic cars for example hondas and others have a little spot for a clutch specifically for if one was to ever do a manual tranny swap. Does the mx3 have this?
Does anyone know what i am talking about or am i just crazy? haha

Ryan · Post by **Ryan** » March 3rd, 2010, 1:01 am

I doubt it.

I don't understand, to mate to the auto flywheel? that doesn't make any sense.

Just get a manual flywheel and a decent, normal clutch...

umcamara · Post by **umcamara** » March 3rd, 2010, 4:43 am

I thought he meant a spot for a clutch pedal?? If so, you can put a clutch pedal in by swapping to the manual pedal brackets.

Berbz · Post by **Berbz** » March 3rd, 2010, 11:16 am

yeah i meant in some automatic cars they make a specific spot for a clutch pedal for if a tranny swap was to happen it would make things easier. I dont really know exactly, i just overheard some guy talking about it one day.

Berbz · Post by **Berbz** » March 3rd, 2010, 5:08 pm

i guess what i am asking is if this is true, than do the mx3s have it? or is the guy i heard this from just crazy lol

Newfie_dan · Post by **Newfie_dan** » March 3rd, 2010, 11:01 pm

almost all unibody cars were made from the same mold for any given model so yes it has all the same holes as a standard car if its an auto, so holes in the firewall etc are all the same right across the board. Its cheaper to make 1 unibody and just close off the uneeded holes with a grommet.

Berbz · Post by **Berbz** » March 4th, 2010, 12:30 am

ahhh i see. Thank you very much.

MX-3.com

tranny question

tranny question

Re: tranny question

Re: tranny question

Re: tranny question

Re: tranny question

Re: tranny question

Re: tranny question