[GI] 92 GS Project
-
- Regular Member
- Posts: 85
- Joined: July 30th, 2008, 3:49 pm
- Location: Central PA
[GI] 92 GS Project
Gauging Interest:
1992 MX-3 GS parts car. 1.8 V6 has blown head gasket and is removed. 5 speed tranny removed. Car is gutted and stripped. All original stock parts in my posession will be included. All replacement parts in my posession will be included. All aftermarket parts in my posession will be included. Ideally I'd like to find a buyer to take it all for a set amount. I know many of you would suggest a part out, but I just don't have the time. I'll list and post pics of as much as I can, and will be adding and updating as often as possible. Everything is located in Central Pennsylvania. Hoping to get enough so I can get something else that I can get on the road right away. I just need a means of transport at this point, so this is kinda my desperate attempt to see if and what I would be able to get for this ongoing project. Would love to finish it, but what I want and what I need right now are two different things. PM me any questions regarding buying as a whole. Please no pms asking for individual parts as this is not a part-out thread at this time.
Pakfeifer front bumper
Pakfeifer sides
Pakfeifer rear bumper
Eyebrows (2 pair)
Black Altezza tail lights
Clear turn signals
Clear marker lights
Dropzone coilovers
Tokico High Performance struts
OBX camber bolts (front & rear sets)
front and rear strut bars
4 new front strut boots
4 new rear strut boots
Corksport stainless clutch line
Corksport stainless brake lines
Bronze Oil shifter bushings
SRD shifter extension bushings
Poly control arm bushings
MSD 6A ignition
Bosch Disty cap for HEI mod
GM high performance HEI module
MSD 8.5mm ignition wire (for coil)
MSD coil bracket
SS Autochrome headers
Toucan Industries Ractive style muffler
Speedhut glow gauges
Curved neck Millenia intake
Je-50 MAF meter
new replacement ball joints
new replacement tie rod ends
new replacement end links
new front wheel bearings (pressed in hubs)
new brake pads (in calipers)
Exedy replacement clutch kit
Oil cap
6 NGK sparkplugs
Valve cover gasket set w/ new grommets
1.8 V6 w/ blown head gasket
5 Speed Trans
Honeycomb rims with 75% new tread Yokohama Avids
stock parts etc.
I'm sure theres more parts I'm missing, haven't gone through it all yet
related post: http://www.mx-3.com/phpBB3/viewtopic.php?f=1&t=71792" onclick="window.open(this.href);return false;
1992 MX-3 GS parts car. 1.8 V6 has blown head gasket and is removed. 5 speed tranny removed. Car is gutted and stripped. All original stock parts in my posession will be included. All replacement parts in my posession will be included. All aftermarket parts in my posession will be included. Ideally I'd like to find a buyer to take it all for a set amount. I know many of you would suggest a part out, but I just don't have the time. I'll list and post pics of as much as I can, and will be adding and updating as often as possible. Everything is located in Central Pennsylvania. Hoping to get enough so I can get something else that I can get on the road right away. I just need a means of transport at this point, so this is kinda my desperate attempt to see if and what I would be able to get for this ongoing project. Would love to finish it, but what I want and what I need right now are two different things. PM me any questions regarding buying as a whole. Please no pms asking for individual parts as this is not a part-out thread at this time.
Pakfeifer front bumper
Pakfeifer sides
Pakfeifer rear bumper
Eyebrows (2 pair)
Black Altezza tail lights
Clear turn signals
Clear marker lights
Dropzone coilovers
Tokico High Performance struts
OBX camber bolts (front & rear sets)
front and rear strut bars
4 new front strut boots
4 new rear strut boots
Corksport stainless clutch line
Corksport stainless brake lines
Bronze Oil shifter bushings
SRD shifter extension bushings
Poly control arm bushings
MSD 6A ignition
Bosch Disty cap for HEI mod
GM high performance HEI module
MSD 8.5mm ignition wire (for coil)
MSD coil bracket
SS Autochrome headers
Toucan Industries Ractive style muffler
Speedhut glow gauges
Curved neck Millenia intake
Je-50 MAF meter
new replacement ball joints
new replacement tie rod ends
new replacement end links
new front wheel bearings (pressed in hubs)
new brake pads (in calipers)
Exedy replacement clutch kit
Oil cap
6 NGK sparkplugs
Valve cover gasket set w/ new grommets
1.8 V6 w/ blown head gasket
5 Speed Trans
Honeycomb rims with 75% new tread Yokohama Avids
stock parts etc.
I'm sure theres more parts I'm missing, haven't gone through it all yet
related post: http://www.mx-3.com/phpBB3/viewtopic.php?f=1&t=71792" onclick="window.open(this.href);return false;
Last edited by nightridergsr on October 22nd, 2009, 9:46 pm, edited 7 times in total.
Re: [GI] 92 GS Project
So how much we talkin for all of it?
1992 MX-3 GS in work.
2006 speed6, Wife say's i can't work on it.
2004 GSX-R 1000 Mat Mladin Replica
2006 toyota tacoma
1995 MX-6 in pieces almost ready for the junk yard, To much body damage.
2006 speed6, Wife say's i can't work on it.
2004 GSX-R 1000 Mat Mladin Replica
2006 toyota tacoma
1995 MX-6 in pieces almost ready for the junk yard, To much body damage.
-
- Regular Member
- Posts: 85
- Joined: July 30th, 2008, 3:49 pm
- Location: Central PA
Re: [GI] 92 GS Project
updated a few things, hoping for 1,200 for everything, enough to get something that I can get on the road right away.
again just gauging interest, seeing if it's even worth that much to anyone, of course to me it is worth more than 1,200, only because I know what I paid for the parts, alot of them were never installed, have no miles on them, and are like new except for the fact they have been setting in my garage for an extended amount of time.
again just gauging interest, seeing if it's even worth that much to anyone, of course to me it is worth more than 1,200, only because I know what I paid for the parts, alot of them were never installed, have no miles on them, and are like new except for the fact they have been setting in my garage for an extended amount of time.
- Ryan
- Senior Member
- Posts: 7198
- Joined: April 7th, 2008, 1:06 pm
- antispam: ~SPAM*SUX~
- Location: Manitoba
Re: [GI] 92 GS Project
Holy crap someone give this guy 3k and run...
If only I didn't have 3 already!
If only I didn't have 3 already!
Now with Moderator power!
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
-
- Regular Member
- Posts: 85
- Joined: July 30th, 2008, 3:49 pm
- Location: Central PA
Re: [GI] 92 GS Project
I'll take 3k
- Ryan
- Senior Member
- Posts: 7198
- Joined: April 7th, 2008, 1:06 pm
- antispam: ~SPAM*SUX~
- Location: Manitoba
Re: [GI] 92 GS Project
In canada, I'd pay that...
Now with Moderator power!
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
- umcamara
- Supporting Member
- Posts: 1892
- Joined: June 12th, 2007, 3:15 am
- antispam: No
- Location: Winnipeg, Manitoba, Canada
Re: [GI] 92 GS Project
Maybe it's not, but sounds like a scam. Just caution to whoever buys it.
-
- Regular Member
- Posts: 85
- Joined: July 30th, 2008, 3:49 pm
- Location: Central PA
Re: [GI] 92 GS Project
why may I ask do you suggest this may be a scam, I just need wheels dude. between school and work I don't have the time or money to finish this project atm. you can believe what you want, but a scam it is not.
- umcamara
- Supporting Member
- Posts: 1892
- Joined: June 12th, 2007, 3:15 am
- antispam: No
- Location: Winnipeg, Manitoba, Canada
Re: [GI] 92 GS Project
It was just a word of caution dude. To me it's a red flag when somebody refuses to part out new items, and seems to be taking a great loss as a result of the sale. Often when things seem too good to be true, they are. There've been at least one too many scams against members of this site.
I have no idea whether it is or not. Wish I had the cash for it. Good luck with the sale.
I have no idea whether it is or not. Wish I had the cash for it. Good luck with the sale.
-
- Regular Member
- Posts: 85
- Joined: July 30th, 2008, 3:49 pm
- Location: Central PA
Re: [GI] 92 GS Project
I understand your concern. Gauging interest is exactly that, gauging interest. I am not trying to scam anyone I would just like to see what members of the board think this collection of parts may be worth. Again I know what I paid for the items, but that does not mean that it is what someone is willing to pay for them. As with anything there is the depreciation value. You buy a brand new car off the show room floor. As soon as the paperwork is signed and that car is considered sold, it drops in value. Same goes for parts. I may say they are brand new except for the fact they have been sitting in my garage. If I offer a clutch kit for $120, because that is what I paid for it and to me, it is in brand new condition. That same clutch kit sells for exactly that - $120 on ebay but, where would you rather buy the clutch kit from? Me because you are taking my word for it that it is brand new, or from ebay where you know it better be brand new or you have a sure fire means of getting a refund of your money. I'll give anyone interested my home phone number, my cell phone number, address of where I go to school, etc.(within reason I dont need prank calls, or someone just trying to find where this stuff is located so they can break into my garage and steal what they want, I understand ya'll need to protect yourself from getting ripped off, in the same sense I need too as well) I don't even need Paypal, come pick it up in person, pay in person. If your seriously interested in buying this as a whole contact me we can arrange something so the buyer can come see in person what they are getting, exchange phone numbers, etc. etc.
- umcamara
- Supporting Member
- Posts: 1892
- Joined: June 12th, 2007, 3:15 am
- antispam: No
- Location: Winnipeg, Manitoba, Canada
Re: [GI] 92 GS Project
Well said. In person is the key here.
-
- Regular Member
- Posts: 1603
- Joined: March 6th, 2007, 1:17 pm
- Location: Pittsburgh, Pennsylvania (USA)
Re: [GI] 92 GS Project
damn! If only I had found you sooner
That's not bad at all for a V6 with all the goodies.. I'd easily have paid you that much but too late now.. I'm BP swapping and that's my goal.
But seriously good luck with the sale.. I know there isn't many MX'ers in PA on here but hopefully something pulls through.
That's not bad at all for a V6 with all the goodies.. I'd easily have paid you that much but too late now.. I'm BP swapping and that's my goal.
But seriously good luck with the sale.. I know there isn't many MX'ers in PA on here but hopefully something pulls through.
- Ryan
- Senior Member
- Posts: 7198
- Joined: April 7th, 2008, 1:06 pm
- antispam: ~SPAM*SUX~
- Location: Manitoba
Re: [GI] 92 GS Project
I simply wish I was closer.
If you do decide to part out I have a large list of things I want off of there, its not hard to ship one box
If you do decide to part out I have a large list of things I want off of there, its not hard to ship one box
Now with Moderator power!
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
-
- Regular Member
- Posts: 85
- Joined: July 30th, 2008, 3:49 pm
- Location: Central PA
Re: [GI] 92 GS Project
Gauging Interest.
-
- Supporting Member
- Posts: 1637
- Joined: February 18th, 2003, 2:01 am
- Location: Jermyn,PA
Re: [GI] 92 GS Project
Hey PM me your number , I may be interested,
Thanks
Thanks
93 Kandy Tangerine Mx3 GS-DE
05 Saab 9-2x (Wrx power plant)
02 Subaru Impreza OBS
05 Subaru forester Xt - sti mods
04 dodge ram - toy hauler -FOR SALE
& Lots of Toys to haul
05 Saab 9-2x (Wrx power plant)
02 Subaru Impreza OBS
05 Subaru forester Xt - sti mods
04 dodge ram - toy hauler -FOR SALE
& Lots of Toys to haul