Let's see your engine bays!!

mx-3_4evr · Post by **mx-3_4evr** » June 16th, 2009, 3:26 pm

I think I haven't posted my current engine bay here:

wytbishop · Post by **wytbishop** » June 16th, 2009, 5:11 pm

You almost have room for another one in there.

93vtecklr · Post by **93vtecklr** » June 16th, 2009, 6:14 pm

Here's the Datsun's engine bay, tuckin 18" 100 spokes!!! Those are S-10 Air Ride Technologies control arms, Chassis Tech drop spindles, did the 5 lug swap for disc brakes. It's an old pic but I don't have any completed pics until the frame is pulled and powdercoated.

Here's the Willy's engine bay, that's what 425 Corvette HP looks like!!!

hppwdn · Post by **hppwdn** » June 18th, 2009, 9:47 am

solo_ryder wrote:Ppl don't really wrap headers for 4 reasons:

I high temp ceramic painted mine. It looks a lot cleaner when it's done. And now my turbo blanket matches my primaries and downpipe.

solo_ryder · Post by **solo_ryder** » June 18th, 2009, 10:01 am

hppwdn wrote:
solo_ryder wrote:Ppl don't really wrap headers for 4 reasons:
I high temp ceramic painted mine. It looks a lot cleaner when it's done. And now my turbo blanket matches my primaries and downpipe.

Word. I managed to find a set of 5th gen hotshot headers for my car as well. Ceramic coating ftw

mx-3_4evr · Post by **mx-3_4evr** » June 18th, 2009, 11:27 am

I have ceramic coating under the heat wrap

94drumx3 · Post by **94drumx3** » August 1st, 2009, 9:13 pm

mx-3_4evr wrote:I think I haven't posted my current engine bay here:

Youuu are soooOOOo Beautiful.....to MEEEeeEE! Cant you see!

johnmx3ze · Post by **johnmx3ze** » August 3rd, 2009, 1:37 am

heres mine i have lots of cleaning to do but it comming...

NavyFCCIWS · Post by **NavyFCCIWS** » September 17th, 2009, 8:58 am

Hey guys its been a while since i been on here and i forgot my other account password. Im going to iraq but plan on getting another mx when i get back. Heres my old mx3 engine bay. Ive had 2 mx3s before. 1 was all stock then my white one was all show. My next endeavour will be clean and all go.

timpronk · Post by **timpronk** » September 18th, 2009, 2:20 pm

Stay safe over there mister!

nobodyhere671 · Post by **nobodyhere671** » October 19th, 2009, 9:28 pm

Not done or clean but eh

mx-3_4evr · Post by **mx-3_4evr** » October 19th, 2009, 9:35 pm

^ Nice! What exhaust manifold is that? What radiator are you using?

nobodyhere671 · Post by **nobodyhere671** » October 19th, 2009, 10:02 pm

I took the ebay header, made all the welds thicker, welded another pipe on for the wastegate, cut the t25 flange off and welded the t3 on. And i hate to say it but its a civic radiator lol couldn't fit the long mx3 one in due to it interfering with the turbocharger.

mx-3_4evr · Post by **mx-3_4evr** » October 19th, 2009, 10:37 pm

lol nice! Is that a T04E? I saw your vB gallery over at clubprotege.com I think

nobodyhere671 · Post by **nobodyhere671** » October 20th, 2009, 6:21 am

It's a 57 trim T3/T4 .60 cold side .48 hotside. i'm not sure what vB means lol, but these are the first pictures i've posted of the bay so i'd assume it was probably someone else.

MX-3.com

Let's see your engine bays!!

Re: Let's see your engine bays!!

Re: Let's see your engine bays!!

Re: Let's see your engine bays!!

Re: Let's see your engine bays!!

Re: Let's see your engine bays!!

Re: Let's see your engine bays!!

Re: Let's see your engine bays!!

Re: Let's see your engine bays!!

Re: Let's see your engine bays!!

Re: Let's see your engine bays!!

Re: Let's see your engine bays!!

Re: Let's see your engine bays!!

Re: Let's see your engine bays!!

Re: Let's see your engine bays!!

Re: Let's see your engine bays!!