Ryan - 1993 Black BP RS-RIP

In this section, Users can post worklogs for their vehicle and show users their projects. (MX-3 ONLY!). Please create only ONE topic when starting a project, and DO NOT create 2 worklogs for the same vehicle, even though they are different projects. READ THE STICKY!
User avatar
chrome730
Regular Member
Posts: 419
Joined: November 24th, 2008, 5:46 pm

Re: Ryan - 1993 Black RS *BP Swap and troubleshooting*

Post by chrome730 »

ur not lying when you were saying the fuel filter was gonna leak fuel everywhere. i remember changing my fuel filter when i had no gas making it to the engine a while back.
It only takes a single voice to start a revolution
User avatar
Ryan
Senior Member
Posts: 7198
Joined: April 7th, 2008, 1:06 pm
antispam: ~SPAM*SUX~
Location: Manitoba

Re: Ryan - 1993 Black RS *BP Swap and troubleshooting*

Post by Ryan »

Yesterday night I changed the lower exhaust mani gasket in my buddy's garage.

For S&G I started her up with the header open. Daaaaaauuum that was loud. I never knew my car could sound so aggressive. It sounded MEAN! I'm almost in love with it and wonder who would complain if I drove around like that. Also, my MAF is for the 1/6 so it runs super rich and it shot a little flame and did that awesome popping backfire thing...


Sigh.

When all was done, I see another leak just after the cat :evil:

I also got in the fresh wiper/signal arms, the brakes are fixed, rreverse glows installed, coolant flushed again, (I'm running pure water untill it stays clear for a week at least) oil changed, and tires rotated :)
Now with Moderator power!

Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
Mx3Kid16
Regular Member
Posts: 506
Joined: January 28th, 2009, 5:25 pm
Location: Portland, Oregon

Re: Ryan - 1993 Black RS *BP Swap and troubleshooting*

Post by Mx3Kid16 »

soo much done in one day :2thumbsup:
CF Hood, Kenwood everything, 2.25 catback exhaust, H&R Springs, F&B Strut bars

My worklog: http://mx-3.com/phpBB3/viewtopic.php?f=46&t=68856" onclick="window.open(this.href);return false;

Good afternoon from the biggest Douch around;D
User avatar
Ryan
Senior Member
Posts: 7198
Joined: April 7th, 2008, 1:06 pm
antispam: ~SPAM*SUX~
Location: Manitoba

Re: Ryan - 1993 Black RS *BP Swap and troubleshooting*

Post by Ryan »

I haven't updated this in awhile.

My wheel nearly fell off.

I was ripping s---, like usual, and I got a light clunk that followed the wheel speed. I figured it was axle, and didn't pay much attention. Got it up on jacks, and it sounded pretty bad. It got progressively worse, and I was listening to loud tunage (Sick Puppies - You're Going Down) and took a corner, and BLAMO I feel this terrible jerk and the car shakes so bad I think its going to roll. I get out and look around, it looks okay. Get in, and idle in 1st gear down the shoulder. I feel like I'm riding a merry-go-round at 20kph. Peek my head out the passenger window, and my front tire is doing crazy wobbles. I stop, jack it up, and TAKE THE WHEEL OFF WITH MY FINGERS! Call the GF, because she stole my tire iron. Later, she almost gets T-boned because her 03 civic's PS pump is s--- (tell your friends) and she couldn't clear the highway because it kicked on her, and the other driver had 4 wheel lock before skidding onto the shoulder to avoid her. Crazyness.

I honestly think someone was screwing with me, because I hadn't taken that off in a LONG time, and I would never take only one off, and the other was tight. Also, there is no reason that I wouldn't have tightened it. I have an awesome torque wrench, and I love using it.

I de-badged, and added a zoom-zoom sticker, and an MX-3.COM sticker, and put in a protege fuel rail with ford fuel harness, and ford injectors. Fresh 02 sensor, and 1.8 DOHC VAF (U code) and my mileage STILL sucks. (500ish/tank? and I drive like I stole it 24/7)

Compressions reads 120-125 through all cyls (super low? what the heck? I just hope I did it wrong)

Fresh tires, it runs quieter now. Need to put in springs and get alignment.

Replaced a headlamp.

I'm just a little bummed. Stupid mileage. I'm commuting 80 minutes round trip 3 days a week all winter, and I need that mileage.

I'll add some pickytars, whenever I have time. Everyone likes pickytars.

Oh! I found the key to stopping the fuel system from spraying everywhere when changing fuel stuff. Loosen the gas cap!!! Takes all the pressure off the system. But beware, the high pressure side (rail side, not FPR side) will still spit at you. Gas hurts eyes, pull it off with a big rag around your hand.
Now with Moderator power!

Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
User avatar
93vtecklr
Regular Member
Posts: 924
Joined: March 23rd, 2009, 12:10 am
Location: Red Deer, Alberta

Re: Ryan - 1993 Black RS *BP Swap and troubleshooting*

Post by 93vtecklr »

Yes, we love them. I think if you're ripping around constantly, with a modified engine, 500kms/tank sounds pretty damn good. When I rip around I get maybe 250. If I'm lucky.
Image
1993 Blaze Red SE, 17" blackie's, b+m sts, 45 deg 3" exh pipe/intake tube, K8ZE, aftmkt probe headers, magnaflow hi-cat, all 2.5" piping, magnaflow muffler.
1976 Datsun 620 p/u, full airride, Firestone 2600`s, 16ga fuel cell, Optima yellow top, AZ compressor, custom tubular frame with 9in step notch, 18" 100 spokes
1955 Willys Overland 4x4 P/U, '78 LT1 350 cu.in, fully restored.
User avatar
Ryan
Senior Member
Posts: 7198
Joined: April 7th, 2008, 1:06 pm
antispam: ~SPAM*SUX~
Location: Manitoba

Re: Ryan - 1993 Black RS-RIP

Post by Ryan »

So, its time to annouce I wrote off my baby.


I was driving... and then I saw a culvert, and up was sideways. I have no memory between A and B. I wasn't on anything, and I wasn't feeling particularily sleepy. didn't have the noddies either. I'm going to see neuologist, actually.

The bad:
I crossed the oncoming lane at highway speed, hit a culvert at unknown speed.
Had it happened at nearly any other point in time, I could very well have had a head on and died.
I wrote off my baby:(

The good:
I get a fresh start with cars, and respect for driving.
I got my car back, plus 2.2k to get something else on the road
I'm starting the V6 world. DE is coming in spring. Check for worklog!


Here she be:
Image
Image

Image
Image
Image
Image
Image


Surprisingly, aside from the alignment being terrible, it still runs and drives. The splash sheild on the driver side rubs, but I have the bumper and fender off already. Also, the bottom rad hose rubs on the PS pully.

The car COULD go back on the road, if it wasn't for the A pillar damage... damn culvert.


I WILL BE PARTING HER OUT, THERE WILL BE A THREAD SOON
Now with Moderator power!

Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
User avatar
93vtecklr
Regular Member
Posts: 924
Joined: March 23rd, 2009, 12:10 am
Location: Red Deer, Alberta

Re: Ryan - 1993 Black RS-RIP

Post by 93vtecklr »

Guess the whole car is a wraparound now, not just the spoiler, you'll have an extra few hun to play around with when you sell the BP. And start swappin parts you need, and sell the ones you don't. I'm very glad to hear you are okay, and are going to see a doctor to find out if there's anything wrong. A lot of us are nuts, but healthy.
Image
1993 Blaze Red SE, 17" blackie's, b+m sts, 45 deg 3" exh pipe/intake tube, K8ZE, aftmkt probe headers, magnaflow hi-cat, all 2.5" piping, magnaflow muffler.
1976 Datsun 620 p/u, full airride, Firestone 2600`s, 16ga fuel cell, Optima yellow top, AZ compressor, custom tubular frame with 9in step notch, 18" 100 spokes
1955 Willys Overland 4x4 P/U, '78 LT1 350 cu.in, fully restored.
User avatar
bfamiluyi
Regular Member
Posts: 47
Joined: November 3rd, 2006, 3:37 pm
Location: houston
Contact:

Re: Ryan - 1993 Black RS-RIP

Post by bfamiluyi »

damn sorry to hear, but why part
FASTLANE ONLY
1993 mazda mx3 1.6 sohc K&N INTAKE R1 MUFFLER SOON TO BOOST (SOHC TURBO)
1989 nissan 240sx sr20 wreck RIP
2002 saturn Ls2 RIP
User avatar
93vtecklr
Regular Member
Posts: 924
Joined: March 23rd, 2009, 12:10 am
Location: Red Deer, Alberta

Re: Ryan - 1993 Black RS-RIP

Post by 93vtecklr »

One less gs lip in the world......
Image
1993 Blaze Red SE, 17" blackie's, b+m sts, 45 deg 3" exh pipe/intake tube, K8ZE, aftmkt probe headers, magnaflow hi-cat, all 2.5" piping, magnaflow muffler.
1976 Datsun 620 p/u, full airride, Firestone 2600`s, 16ga fuel cell, Optima yellow top, AZ compressor, custom tubular frame with 9in step notch, 18" 100 spokes
1955 Willys Overland 4x4 P/U, '78 LT1 350 cu.in, fully restored.
User avatar
Ryan
Senior Member
Posts: 7198
Joined: April 7th, 2008, 1:06 pm
antispam: ~SPAM*SUX~
Location: Manitoba

Re: Ryan - 1993 Black RS-RIP

Post by Ryan »

Parting because the A pillar is FUBAR. Thats the final stake. That and I don't want the hastle of a Body Integrity Test.

that, and I'm moving onto a GS :)

yes, my lip got massacred. did't even bother pulling the bits off of the bumper. at least six peices.
Now with Moderator power!

Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
Demonic1
Regular Member
Posts: 363
Joined: May 19th, 2008, 3:54 pm
Location: Ravensdale WA 98051
Contact:

Re: Ryan - 1993 Black RS-RIP

Post by Demonic1 »

Holy sheet Ryan! I'm glad you're okay though.
Hit the neurologist yet? I hope it's nothing major.
Wings on an MX3? What are you thinking?

92 RS BP05
93 GS KLZE
(Previously owned by 2Fazed and then mrMazda92)
Mx3Kid16
Regular Member
Posts: 506
Joined: January 28th, 2009, 5:25 pm
Location: Portland, Oregon

Re: Ryan - 1993 Black RS-RIP

Post by Mx3Kid16 »

You dont remember it because you got head damage. trust me dude.. ive been there.
CF Hood, Kenwood everything, 2.25 catback exhaust, H&R Springs, F&B Strut bars

My worklog: http://mx-3.com/phpBB3/viewtopic.php?f=46&t=68856" onclick="window.open(this.href);return false;

Good afternoon from the biggest Douch around;D
User avatar
Ryan
Senior Member
Posts: 7198
Joined: April 7th, 2008, 1:06 pm
antispam: ~SPAM*SUX~
Location: Manitoba

Re: Ryan - 1993 Black RS-RIP

Post by Ryan »

I don't believe "I got head damage"

but I believe you :)
Now with Moderator power!

Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
projectzemx3
Regular Member
Posts: 1083
Joined: August 23rd, 2008, 12:09 am
Location: Beamsville.

Re: Ryan - 1993 Black RS-RIP

Post by projectzemx3 »

wow, my sister backed into my car and put a small hole in my front bumper with her trailer hitch and i was PISSED!!!

i feel better about my damage now but i feel so bad for you.

hope your alright man.
NEED PARTS INSTALLED? PM ME!
Image
User avatar
marcdh
Regular Member
Posts: 1460
Joined: July 26th, 2006, 3:54 pm
Location: Belfast -Northern Ireland
Contact:

Re: Ryan - 1993 Black RS-RIP

Post by marcdh »

Unlucky man. Concusion is minus fun. Looking forward to the next project :)
AZ-3 1498cc Turbo! EVO 8 turbo and manifold, 5 stud swap, SSR Type C, DIYPNP seq Megasquirt
Mx-3 2.5 V6 Turbo 291 BHP 251 lbft @ 8psi - Retired due to rust and back at uni
View Worklog
Image
Post Reply

Return to “MX-3 Worklogs”