http://www.importtuner.com/features/080 ... index.html" onclick="window.open(this.href);return false;
and because some of you are asking id say this is a 2 on a 5 star difficulty level.
SUMMARY
IM STARTING OVER FROM SCRATCH!
new itbs, new system alltogether
As of right now I am building an ITB for my 95 mx3 with a 1.6L dohc but i plan to do this for the 1.6L sohc and the 1.8L bp(b8 if i can find a suitable template for the manifold) and possibly the k series v6s.
The product will be made from 46mm throttle bodies and will be a direct bolt on. The ITB's will come with velocity stacks, the actual manifold with throttle bodies and socks for the velocity stacks.
There will be 4 injector ports so if need be I can include a factory fuel rail which you can accommodate to fit your injectors if need be or i can leave them all open for nitrous... its your decision. Ultimately all excess ports will be blocked off and smoothed out to ensure smooth flow.
What I will be doing is welding a flange to some runners, then welding a slightly bigger pipe over the last few inches of the runners so i can slip the itbs in side. I will also be creating an adapter housing that will act as the main "tank" of the intake manifold. Something similar to this (http://www.intrinsicperformance.com/ima ... ITB-01.jpg) only longer runners and obviously facing the correct way.
Possibly going to include a vacuum distribution box....depends...
PRICE!
still working on a price being as i don't have all the materials together yet.
rough estimate:
150 ea. -- itbs
xx -- piping (when i get the itbs i can work out size/cost)
cost of materials -- welding (should be fairly cheap per unit)
xx -- flange for head (i was quoted $80 but thats a crock so im still looking)
xx -- misc sheet metal (end plates, vacuum ends, etc)
THE list
Everyone who is defiantly interested or possibly interested just pm me so i can keep track of it
It'll help with bulk buys if i can pitch a number at them....Just need a pm saying defiantly or possibly + engine
Definates:
SuperK
Possibles:
This is what I have so far:
will insert new pics as i progress
![Image](http://img.photobucket.com/albums/v454/glytcher/mx3%20stuff/DSCN1163.jpg)
![Image](http://img.photobucket.com/albums/v454/glytcher/mx3%20stuff/DSCN1179.jpg)
current status:
Flange in, prepped for porting. runners in. need plenum, velocity stacks, and caps for plenum.