How much of a drop on H&R springs?
How much of a drop on H&R springs?
Ill go get them today if its not TOO big of a drop.
http://www.corksport.com/h-and-ampr-low ... -v-6-.html" onclick="window.open(this.href);return false;
http://www.corksport.com/h-and-ampr-low ... -v-6-.html" onclick="window.open(this.href);return false;
CF Hood, Kenwood everything, 2.25 catback exhaust, H&R Springs, F&B Strut bars
My worklog: http://mx-3.com/phpBB3/viewtopic.php?f=46&t=68856" onclick="window.open(this.href);return false;
Good afternoon from the biggest Douch around;D
My worklog: http://mx-3.com/phpBB3/viewtopic.php?f=46&t=68856" onclick="window.open(this.href);return false;
Good afternoon from the biggest Douch around;D
- marcdh
- Regular Member
- Posts: 1460
- Joined: July 26th, 2006, 3:54 pm
- Location: Belfast -Northern Ireland
- Contact:
Re: How much of a drop on H&R springs?
45mm aren't they?
AZ-3 1498cc Turbo! EVO 8 turbo and manifold, 5 stud swap, SSR Type C, DIYPNP seq Megasquirt
Mx-3 2.5 V6 Turbo 291 BHP 251 lbft @ 8psi - Retired due to rust and back at uni
View Worklog

Mx-3 2.5 V6 Turbo 291 BHP 251 lbft @ 8psi - Retired due to rust and back at uni
View Worklog

Re: How much of a drop on H&R springs?
shizz what is that inches hmmm lemme go grab the ruler.
CF Hood, Kenwood everything, 2.25 catback exhaust, H&R Springs, F&B Strut bars
My worklog: http://mx-3.com/phpBB3/viewtopic.php?f=46&t=68856" onclick="window.open(this.href);return false;
Good afternoon from the biggest Douch around;D
My worklog: http://mx-3.com/phpBB3/viewtopic.php?f=46&t=68856" onclick="window.open(this.href);return false;
Good afternoon from the biggest Douch around;D
Re: How much of a drop on H&R springs?
okay so about an inch and a half anybody else got these springs?
CF Hood, Kenwood everything, 2.25 catback exhaust, H&R Springs, F&B Strut bars
My worklog: http://mx-3.com/phpBB3/viewtopic.php?f=46&t=68856" onclick="window.open(this.href);return false;
Good afternoon from the biggest Douch around;D
My worklog: http://mx-3.com/phpBB3/viewtopic.php?f=46&t=68856" onclick="window.open(this.href);return false;
Good afternoon from the biggest Douch around;D
- umcamara
- Supporting Member
- Posts: 1892
- Joined: June 12th, 2007, 3:15 am
- antispam: No
- Location: Winnipeg, Manitoba, Canada
Re: How much of a drop on H&R springs?
Yep, nice drop. Not too much.
- Evo_Spec
- Senior Member
- Posts: 2504
- Joined: December 30th, 2008, 3:41 am
- Location: Calgary, Alberta, Canada
Re: How much of a drop on H&R springs?
just FYI, H&R's are a linear spring and Eibach's are a progressive spring, what that means is the the Eibachs start out soft and get harder the more they compress, the H&R's are one hardness all the way through.
so the eibachs make for a smoother ride while the H&R's are a harder ride but better handling.
hope this helps, if you were even wondering to begin with =P
so the eibachs make for a smoother ride while the H&R's are a harder ride but better handling.
hope this helps, if you were even wondering to begin with =P
Re: How much of a drop on H&R springs?
Yes, actually i was thanks for the great input! What has the bigger drop? Im not trying to have a gravel eater. but when i put the ruler up to my car where it would be setting was about a centimeter above my tire, that was with 44millimeter drop assuming im using the H&R's. Does the Eibachs go lower?Evo_Spec wrote:just FYI, H&R's are a linear spring and Eibach's are a progressive spring, what that means is the the Eibachs start out soft and get harder the more they compress, the H&R's are one hardness all the way through.
so the eibachs make for a smoother ride while the H&R's are a harder ride but better handling.
hope this helps, if you were even wondering to begin with =P
CF Hood, Kenwood everything, 2.25 catback exhaust, H&R Springs, F&B Strut bars
My worklog: http://mx-3.com/phpBB3/viewtopic.php?f=46&t=68856" onclick="window.open(this.href);return false;
Good afternoon from the biggest Douch around;D
My worklog: http://mx-3.com/phpBB3/viewtopic.php?f=46&t=68856" onclick="window.open(this.href);return false;
Good afternoon from the biggest Douch around;D
- Evo_Spec
- Senior Member
- Posts: 2504
- Joined: December 30th, 2008, 3:41 am
- Location: Calgary, Alberta, Canada
Re: How much of a drop on H&R springs?
the eibachs are a little high than the H&R's, i don't know by how much though, from what i hear mainly though is H&R's are better looking (ride height) and handling and Eibachs are a smoother ride but really you can't go wrong with either
Re: How much of a drop on H&R springs?
AWESOME! I think ill be getting some of those soon than! I've been dyin to lower it
CF Hood, Kenwood everything, 2.25 catback exhaust, H&R Springs, F&B Strut bars
My worklog: http://mx-3.com/phpBB3/viewtopic.php?f=46&t=68856" onclick="window.open(this.href);return false;
Good afternoon from the biggest Douch around;D
My worklog: http://mx-3.com/phpBB3/viewtopic.php?f=46&t=68856" onclick="window.open(this.href);return false;
Good afternoon from the biggest Douch around;D
Re: How much of a drop on H&R springs?
I thought H&Rs were progressive, did that change recently or something?