these bolts are a f---in nightmare
![Evil or Very Mad :evil:](./images/smilies/icon_evil.gif)
this got me thinkin, when i put my suspenson in i needed a alignment. when i did my engine swap i needed a alignment, when i put my coilovers in i needed a alignment, when i replaced my axle 2 days ago, i was going to need an alignment!
now i was sick of this so i took all four of camber bolts out and replaced them with the regular bolts and now i have fixed camber. this is good because now with one alignment i can take my car apart and put it back together with no alignment,
you could say that i can mark where my camber bolts were and put it back to that. but well my car is pretty much tucking in the front now and close to it in the rear and i have no huge camber issue using the stock bolts.
so what i am getting at here is that if anybody is putting suspension in there mx3's, dont even bother with camber bolts its just a waste. unless you want them to do the opposite and run crazy camber i would recommend just not using them.