How did you run your intercooler piping?

Shades · Post by **Shades** » October 24th, 2008, 10:27 am

Just wondering if anyone has any pictures of their intercooler piping?

I am wondering how you got it around the front of the car to the engine bay... cause in my car there is a bracing bracket in the bottom corners that is hindering the area of where my piping is wanting to go.

cjthor · Post by **cjthor** » October 24th, 2008, 1:13 pm

Shades wrote:Just wondering if anyone has any pictures of their intercooler piping?

I am wondering how you got it around the front of the car to the engine bay... cause in my car there is a bracing bracket in the bottom corners that is hindering the area of where my piping is wanting to go.

I prolly did it the weirdest. I angled the radiator back and went up and over it. It was a b*tch and ive gone thru two radiators cuz it had a tendancy to rub thru....I might redo it to make it have more clearance....Might even take a few rows out of the top of the radiator.

Shades · Post by **Shades** » October 24th, 2008, 8:55 pm

Hey Jarid, long time no talk!

Yeah that is a wierd way to do it... with my big GT3071R I don't have room to do that. After I fabbed up my manifold, I have about 1/4" between the turbo and the rad.

It's just that if I go underneath and around like the rest of the people, I'm gonna have ground clearance issues... unless I remove that bracket in the corners, but I'm sure Mazda put that there for a reason.

hppwdn · Post by **hppwdn** » November 21st, 2008, 4:05 pm

Shades wrote:Just wondering if anyone has any pictures of their intercooler piping?

I am wondering how you got it around the front of the car to the engine bay... cause in my car there is a bracing bracket in the bottom corners that is hindering the area of where my piping is wanting to go.

Do you have a picture of the bracket? I had to remove one of my tow hooks the first time I made pipes for my car.

My current piping is run like this

Shades · Post by **Shades** » November 23rd, 2008, 1:02 am

Yeah sorry... that's what I meant... did any of your remove your tow hooks. I guess it's okay to remove them, and that it won't disturb the intergrity of the front end clip?

RS_OBD'oh_2 · Post by **RS_OBD'oh_2** » November 23rd, 2008, 1:37 pm

I can't believe all the people removing the front bumper supports. Not safe for one.. and no coverage if you get into a smash.

boosted_bullet · Post by **boosted_bullet** » November 23rd, 2008, 3:47 pm

anyone running a eclipse sidemount intercooler? any pics?

solo_ryder · Post by **solo_ryder** » November 23rd, 2008, 4:20 pm

I know hector is. I will msg him on msn and see if he can post up some

boosted_bullet · Post by **boosted_bullet** » November 23rd, 2008, 5:34 pm

johnmx3ze · Post by **johnmx3ze** » November 23rd, 2008, 5:39 pm

heres mine on my ze

Shades · Post by **Shades** » November 24th, 2008, 12:59 am

You installed a front mounted bar just so you could mount your intercooler?... that's crazy styles!

hgallegos915 · Post by **hgallegos915** » November 24th, 2008, 1:05 am

mines a side mount, ill post pics later on... i dont want people or the popos police to know im boosted lol

Bo0sted_Rafi · Post by **Bo0sted_Rafi** » November 24th, 2008, 9:22 am

You can make the pipping in the both sides of the radiator. you only need the an intercooler of 24" total lenght like im use.

RS_OBD'oh_2 · Post by **RS_OBD'oh_2** » November 25th, 2008, 12:02 am

There are some really nice setups out there. Maybe a little overkill. It's better to use a smaller intercooler and keep the front bumper/support. My intercooler is half the size of most of these, yet will handle 22 psi and more than 300hp. Most of the intercoolers shown will probably be fit for 500+hp. I've got nothing against cool air, but we should try to keep things safe and legal. You will not have any insurance coverage in the event of a collision... you are also waaay more likely to be injured without a primary safetly structure. It's all well and good that you can give an example of how to route the piping and the intercooler placement.... but maybe these are good examples of how not to do things.

This forum's primary goal is to lead people in the right direction while helping. I do not intend on trashing other peoples work, sorry if it seems that way.

kab-rst · Post by **kab-rst** » December 1st, 2008, 4:08 am

used to run it through the driver side hole behing the headlight

now i'm changing the rad/fans, so i'm re-routing the piping straight from the cooler to the TB
invested in some bling and t-clamp

MX-3.com

How did you run your intercooler piping?

How did you run your intercooler piping?

Re: How did you run your intercooler piping?

Re: How did you run your intercooler piping?

Re: How did you run your intercooler piping?

Re: How did you run your intercooler piping?

Re: How did you run your intercooler piping?

Re: How did you run your intercooler piping?

Re: How did you run your intercooler piping?

Re: How did you run your intercooler piping?

Re: How did you run your intercooler piping?

Re: How did you run your intercooler piping?

Re: How did you run your intercooler piping?

Re: How did you run your intercooler piping?

Re: How did you run your intercooler piping?

Re: How did you run your intercooler piping?