I have an extra B6 manifold if someone can use it. Shoot me a PM/offer. I don't think I have any extra turbos. I'll have to look around. I thought I had a vj-14 somewhere.
The downpipe 'housing' can be used off the probe. The downpipe itself can also come from the probe but you'll have to shorten the section that points upwards towards the outlet housing. That's what I did anyways. I bought the pipe new at Napa and cut it. Bring your outlet housing with you to make sure the 3 bolt flange lines up with the housing.
As far as engine management... I backed the distributer way off and the factory 1:1 regulator worked "ok" for a few psi. I have an FIC wired in now using the B6 ECU on a BP engine. No codes. =)
mazdax3speed wrote:that intercooler is 100%pointless
probably hurts your powerband actually, its just a drop in pressure with no cooling effect
Ya think? I believe I mentioned it being useless and planed on cutting a hole in the hood for a scoop. No need to post the obvious.
![Wink :wink:](./images/smilies/icon_wink.gif)