My New Project!!! with Pics (56k warning)
-
- Regular Member
- Posts: 73
- Joined: August 10th, 2005, 2:34 am
- Location: Puerto Rico
My New Project!!! with Pics (56k warning)
Hi guys, i've been working on my car for months. I make a swap from my other mx3, the champagne one.
And this one i bought it in december
We make the hole swap, rear disc brake conversion, install the Stand Alone, make all the fitments to the FMIC, Modify the OEM Fuel System, change the front struts, change front parts like Hood, fenders, front GS Bumper, install the new gauges, power windows, custom AC and PS brackets, etc.
Here some pics about it.
Well guys, now i need to paint the front clip of the car to finish it. I will try to get it to the dyno this week but for now, im pushing 19psi of boost without tune, jejeje
Remember, this car got the same setup than the other one, the diference, full streable car, with AC, PS, all of the interiors and accesories.
I want to hear all kind of oppinions guys, let me know
And this one i bought it in december
We make the hole swap, rear disc brake conversion, install the Stand Alone, make all the fitments to the FMIC, Modify the OEM Fuel System, change the front struts, change front parts like Hood, fenders, front GS Bumper, install the new gauges, power windows, custom AC and PS brackets, etc.
Here some pics about it.
Well guys, now i need to paint the front clip of the car to finish it. I will try to get it to the dyno this week but for now, im pushing 19psi of boost without tune, jejeje
Remember, this car got the same setup than the other one, the diference, full streable car, with AC, PS, all of the interiors and accesories.
I want to hear all kind of oppinions guys, let me know
- redmxlookin4turbo
- Regular Member
- Posts: 85
- Joined: August 2nd, 2008, 9:10 pm
- Location: Highland Ca
- Contact:
Re: My New Project!!! with Pics (56k warning)
i want one....
- xxwhiteboyjim22xx
- Regular Member
- Posts: 145
- Joined: April 4th, 2008, 1:38 pm
- Location: Chicago suburbs, Illinois
Re: My New Project!!! with Pics (56k warning)
aww your poor mazda came with honda rims...
- mitmaks
- Senior Member
- Posts: 8704
- Joined: September 10th, 2001, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Spokane, WA
- Contact:
Re: My New Project!!! with Pics (56k warning)
cool project
Magnum s/s lines, strut bars, carbon fiber bezel, indiglow gauge, Sony Xplod, inverted c/f hood, SRD lower tie bar '93 GS SE '95 Cobra SVT #2722 '68 Charger R/T 440
http://www.cardomain.com/id/mitmaks
http://www.cardomain.com/id/mitmaks
- Savin
- Regular Member
- Posts: 1580
- Joined: November 18th, 2007, 3:05 pm
- Location: Crown Point, IN (Chicago area)
- Contact:
Re: My New Project!!! with Pics (56k warning)
Sweet car! Looking forward to seeing the dyno results!
'95 MX-3 RS - Project "Déjà Vu" Destined for the scrapyard.
'93 MX-3 GS - SOLD!
'93 MX-3 GS SE - Parts car!
'94 MX-3 GS - Scrapped
'94 MX-3 RS - Scrapped
'96 Sunfire SE - Scrapped
'03 Sunfire SE - Deathtrap
'95 Cavalier Base - Scrapped
'94 Thunderbird LX - Collects dust
'89 Mustang GT - SOLD!
'93 MX-3 GS - SOLD!
'93 MX-3 GS SE - Parts car!
'94 MX-3 GS - Scrapped
'94 MX-3 RS - Scrapped
'96 Sunfire SE - Scrapped
'03 Sunfire SE - Deathtrap
'95 Cavalier Base - Scrapped
'94 Thunderbird LX - Collects dust
'89 Mustang GT - SOLD!
- onlytrueromeo
- Senior Member
- Posts: 2756
- Joined: May 16th, 2007, 10:05 pm
- Location: Albany, NY
Re: My New Project!!! with Pics (56k warning)
I'll buy you a plane ticket to come build one for me!
-
- Regular Member
- Posts: 73
- Joined: August 10th, 2005, 2:34 am
- Location: Puerto Rico
Re: My New Project!!! with Pics (56k warning)
If you show me the money, i'll send it to you, jeje.onlytrueromeo wrote:I'll buy you a plane ticket to come build one for me!
The car has a FE3n engine (2.0 dohc) with forged pistons, modified valve spings, 65mm TB, Microtech LTx-8s, T3/t4 turbo (.63stg3 and to4e .60trim) 880cc injectors, Walbro 340 fuel pump, custom Intercooler pippin 2.5", 3" straight exhaust with Dynomax free flow. ETC. In the other car, we make 425whp with the same setup, the only difference was the fuel pump (its was an external one with fuel cell) and we ran 10.8 @ 130 in the first day of track. We estimate, we can ran 10.6 without make new mods but i want another car with all of the accesories.
- onlytrueromeo
- Senior Member
- Posts: 2756
- Joined: May 16th, 2007, 10:05 pm
- Location: Albany, NY
Re: My New Project!!! with Pics (56k warning)
Yup i was followng your build for awhile...very nice. What youre doing with the other RS is exactly my dream. Keeping everything nice and making it fast as well. Next step is to fully sound insulate it
- solo_ryder
- Senior Member
- Posts: 6289
- Joined: October 16th, 2004, 2:01 am
- Location: British Columbia
Re: My New Project!!! with Pics (56k warning)
Nice rims man
I always respected your crazy motor setup. Good luck!
I always respected your crazy motor setup. Good luck!
-
- Regular Member
- Posts: 73
- Joined: August 10th, 2005, 2:34 am
- Location: Puerto Rico
Re: My New Project!!! with Pics (56k warning)
well, the other one was a GS swaped to 4 cilinders. now i bought that RS and change almost everythingonlytrueromeo wrote:Yup i was followng your build for awhile...very nice. What youre doing with the other RS is exactly my dream. Keeping everything nice and making it fast as well. Next step is to fully sound insulate it
Thanks for the comment
Re: My New Project!!! with Pics (56k warning)
Nice MX3, any official 1/4 mile runs?
1994 Mazda MX3 RS | Rebuilt B6DE | Stock
-
- Regular Member
- Posts: 73
- Joined: August 10th, 2005, 2:34 am
- Location: Puerto Rico
Re: My New Project!!! with Pics (56k warning)
Well, its not been tested yet in the 1/4 of mile. I want to make a new setup in pump gas looking for 350-375whp and if i get that goal, with a good set of slicks, i think we can run 11.2 to 11.6, wish me luck.MCNano117 wrote:Nice MX3, any official 1/4 mile runs?
When i get the dyno numbers, i let you all knows
Re: My New Project!!! with Pics (56k warning)
Good luck, get those 11's
1994 Mazda MX3 RS | Rebuilt B6DE | Stock
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
Re: My New Project!!! with Pics (56k warning)
That doesnt look like a bpt?! its the 2.0 version(manifold) the one on the mx6?
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
-
- Regular Member
- Posts: 73
- Joined: August 10th, 2005, 2:34 am
- Location: Puerto Rico
Re: My New Project!!! with Pics (56k warning)
This engine its a FE3n from a Mazda Capella (626). Its come in the japanese version of the mx6 88-92 but mine its from a Ford Telstar. It got forged piston from a 4g63 engine, VW Vr6 Outers valvesprings and a 65mm TB from a Ford Mustang GT. Thats what i got in the engine, the other part of the setup its everything needed for the turbo setup.hgallegos915 wrote:That doesnt look like a bpt?! its the 2.0 version(manifold) the one on the mx6?