I have a broken red wire on the connector side of the knock sensor, It can not be resoldered because its way to close to the connector.
I got another one from the wreaker, but its a wire that splits from 1 to 2 wire.
anyone done it with success?
Knock Sensor
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
Re: Knock Sensor
one is ground the other goes to the ecu.
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
- JWMX3
- Senior Member
- Posts: 2060
- Joined: March 23rd, 2004, 2:01 am
- Location: Grassie, Ontario
- Contact:
Re: Knock Sensor
the ground is bare and wraps spiral around the power wire
Mine was damaged and I tried to repair it but couldnt get rid of the engine light..... so i had to replace the sensor
Mine was damaged and I tried to repair it but couldnt get rid of the engine light..... so i had to replace the sensor
94' Mx3 GS 0-60 in 7.53s [5 spd conversion / Rebuilt 2.5 KL]